StarTech com 2PORT HDMI SWITCH 8K 2 Port HDMI Video Switch 8K 60Hz USB Powered User Guide

: June 9, 2024
: StarTech com

Table of Contents

Product ID
Remote Control
Package Contents
Installation
Operation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**StarTech com 2PORT HDMI SWITCH 8K 2 Port HDMI Video Switch 8K 60Hz USB Powered User Guide

**

Product ID

2PORT-HDMI-SWITCH-8K

Front

Rear

**Sides

**

Remote Control

Component	Function
1	Power LED Indicator

Solid Red: HDMI Switch in Standby Mode
Solid Blue: HDMI Switch is powered on and operational

2| Port Selection Indicator|

Solid Blue: HDMI Input Port is active

3| Auto Switching Indicator|

Solid Blue: Automatic Switching is enabled
LED Off: Automatic Switching is disabled

4| IR Mode Indicator|

Solid Blue: IR Receiver enabled, Remote Control will operate the HDMI Switch
LED Off: IR Receiver disabled, Remote Control will not operate the HDMI Switch

5| Push Button Selector|

Switch between HDMI Input 1 and HDMI Input 2

6| USB Power Input|

Connect the included USB Wall Charger and USB Micro-B Power Cable

7| HDMI Output Port|

Connect to an HDMI Display

8| HDMI Input Ports|

Connect to an HDMI Source Device

9| Mounting Bracket Screw Holes|

Connect the included Mounting Brackets
Holes are on each side of the HDMI Video Switch

Product Information

For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/2PORT-HDMI- SWITCH-8K

Package Contents

HDMI Video Switch x 1
Remote Control (Batteries Not Included) x 1
Mounting Kit x 1
USB Wall Charger x 1
USB Micro-B Power Cable x 1
Rubber Feet x 4
Quick-Start Guide x 1

Requirements

HDMI Source x 2
HDMI Display x 1
HDMI Cables (sold separately) x 3
AAA Batteries (for remote control) x 2
Philips Head Screwdriver x 1

Installation

(Optional) Mounting Kit

Note: Before mounting the HDMI Video Switch make sure that the surface you are mounting to is strong enough to support the weight of the HDMI Video Switch. It is recommended that you mount the HDMI Video Switch on a wall stud to provide the correct support.

Determine the Mounting Surface for the HDMI Video Switch.
Place the Mounting Brackets on each side of the HDMI Video Switch. Align the Holes in the Mounting Brackets with the Holes on the sides of the HDMI Video Switch.
Insert two Screws through each Mounting Bracket and into the HDMI Video Switch.
Tighten each Screw using a Phillips Head Screwdriver.
Mount the HDMI Video Switch to the desired Mounting Surface using the appropriate Mounting Hardware (e.g. Wood Screws).

HDMI Video Switch

Note: Ensure your HDMI Source Device, and the HDMI Displays are powered off before you begin installation.

Connect an HDMI Cable (sold separately) from an HDMI Source Device to HDMI Input 1 on the HDMI Switch.
Connect an HDMI Cable (sold separately) from an HDMI Source Device to HDMI Input 2 on the HDMI Switch.
Note: Each HDMI Port is numbered, please take note of which number is assigned to each HDMI Source Device.

Regulatory Compliance

FCC – Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may
cause undesired operation of the device.
Connect an HDMI Cable (sold separately) to the HDMI Output Port on the HDMI Switch and to an HDMI Input Port on the HDMI Display.
Connect the USB Wall Charger and USB Micro-B Power Cable to an available Power Source and to the USB Power Input on the HDMI Switch.
Power on your HDMI Display, followed by each of your HDMI Source Devices.

Operation

Push Button Operation

Short Press

Press the Push Button Selector to switch between HDMI Input 1 and HDMI Input 2. 3-5 Second Button Press

Enable or disable the Automatic Switching feature of the HDMI Switch. For example, if you are watching TV and would like to watch your Blu-ray player, turn the Blu-ray player on. To switch back to the TV you can turn the Blu-ray player off, or switch the TV Box back on after being switched off, when the Blu-ray player is active.

6 Second Button Press

Enable or disable the IR functionality of the HDMI Switch. The IR Functionality
enables use of the HDMI Switch’s included Remote Control.

Remote Control Operation

Note: Ensure the IR Mode Indicator on the front of the HDMI Switch is solid blue,
indicating that IR Functionality is enabled.
Remove the backplate from the Remote Control and install the 2x AAA Batteries (not included). Point the Remote Control at the front of the HDMI Switch. Press the “1” or “2” Button to manually switch between HDMI Inputs. Using the “IR” Button will disable the IR Functionality of the HDMI Switch.

Note: To re-enable IR Functionality, see the section “6 Second Button Press” under “Push Button Operation”.

The “Auto” Button will enable or disable the Automatic Switching feature on the HDMI Switch.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada

StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.

StarTech.com Ltd
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom

StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands