Maxxima MGF-330 LED Hardwired Low Voltage Landscape Light Fixture Installation Guide
- July 23, 2024
- Maxxima
Table of Contents
Maxxima MGF-330 LED Hardwired Low Voltage Landscape Light Fixture
Specifications
- Model: MGF-330-02
- Brand: Maxxima
- Power: Main (12-24V) low voltage
- Warranty: 3 years limited warranty
Product Usage Instructions
WARNINGS
- Risk of fire or electric shock.
- If you are unfamiliar with electrical installations, consult a qualified electrician before proceeding.
- Turn the power off from the electrical panel before installation.
- Do not make or alter any holes in the wiring enclosure or modify any electrical componentry.
CAUTIONS
- Intended for installation by local codes and the National Electric Code (NEC).
- Use only with a Class 2 power unit.
- Suitable for wet locations.
- Do not operate this product under any conditions other than those for which it is specified.
- Please consider supplemental means of securement. If installed where failure of mounting means could cause injury.
- 12-24V AC/DC.
INSTRUCTIONS
- Ensure that power has been turned off by switching the circuit breaker or by removing the fuse from the fuse panel.
- Connect the fixtures to the stakes and route the wiring through the channel so the wires are hidden.
- Layout the fixtures at the desired locations.
- Run the main (12-24V) low-voltage cable to the farthest fixture.
- At each fixture, cut the main power wire into two parts. Separate the main power cords into two parts from the ends (figure 1).
- Strip approximately 1 inch of insulation off the ends and twist the ends of the wires to make it easier to connect to the fixture wires (figure 2).
- The wires coming from the fixture are non-polarized, ensuring the LED will function correctly whether one wire is connected to white and the other to black, or vice versa. Using the supplied wire nuts, connect the same input/output wire from the main low-voltage power source with one wire from the fixture together. Repeat this step for the second set of wires. If necessary, secure the connection with electrical tape as illustrated in Figure 3
- Dig about a 6-inch deep trench to bury the cable and extra wires in.
- Installation is complete. Restore power, lights are now operational.
3 YEAR WARRANTY
Maxxima extends a 3-year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product with the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.
Contact Us
info@maxximastyle.com
866-MAXXIMA (629-9462)
www.maxximastyle.com
125 Cabot Court Hauppauge, NY 11788
FAQ
Q: What should I do if my LED Garden Fixture is not working after installation?
A: Check the power source, and connections, and ensure that all steps in the installation guide have been followed correctly. If issues persist, contact Maxxima customer support for assistance.