COOSPO H9Z Heart Rate Monitor User Manual
- June 15, 2024
- COOSPO
Table of Contents
ALL ABOUT PASSION
USER MANUAL
Heart Rate Monitor
H9Z-RTN-I1-2324
Standard Accessories
Wearing
- Please moisten the electrode sensing area on the back of the strap with water first 1.
- Adjust the heart rate strap to a comfortable length that fits closely to the skin 2 . This will ensure that the strap does not slip or come loose during intense exercise.
Note : The heart rate strap should have direct contact with your skin, and shouldbe worn on your lower chest.
Functions and Status
The chest type heart rate monitor auto power on when you wear it on, auto
power off when you take it off.
Power on: a single “beep”; Power off: three “beeps”; Alert: five quick “beeps”;
After the heart rate is detected, LED light can display the heart rate zone.
| **Heart Rate Zone*** | Intensity | Breathing Light Color |
|---|---|---|
| Zone 1(<60% MHR) | Very Light | |
| Zone 2(60%-70% MHR) | Light | |
| Zone 3(70%-80% MHR) | Moderate | |
| Zone 4(80%-90% MHR) | Hard | |
| Zone 5(90%-100% MHR) | Maximum |
Note : The heart rate zone is calculated based on the maximum heart rate
(MHR).
The default maximum heart rate value is 200 bpm and can be set in the
CoospoRide/Heartool app.
Connect to Device
First, please wear the H9Z on to power on the sensor, otherwise it will be in
sleep mode and cannot be find by Bluetooth.
Connect to sports and fitness app (Bluetooth)
-
Turn on the Bluetooth and location service on your phone.
Note : Do not pair the sensor in the Bluetooth list of your phone. -
Find the sensor settings menu in the sports & fitness app.
Take CoospoRide and Heartool as examples.
Go to CoospoRide app > More > Sensors > Heart Rate Or go to Heartool app > Settings > Device > Add Device -
Find the H9Z Bluetooth ID and select it to connect.
Connect to smart devices, including fitness equipment and sports watches (Bluetooth and ANT+)
- Select “Add HR sensor” from the smart device settings menu.
- Find the Bluetooth or ANT+ ID for H9Z and select it to connect.
Charging
H9Z takes around 1.5 hours to charge and the indicator light remains green
once it is fully charged.
Note : To extend battery life, please use a DC 5V power adapter or PC USB
port for charging.
Maintenance
- Please rinse the heart rate belt with water and dry it. Avoid using cleaning agents, and do not put it in the washing machine or dryer.
- Remove the sensor from the heart rate strap after use.
Specifications
| Battery Type | Rechargeable Lithium Battery 70mAh |
|---|---|
| Battery Life | 50 Hours |
| Working Temperature | 0℃~45℃(32°~113℉) |
| Charging Temperature | 0℃~40℃(32°~104℉) |
| Wireless Transmission | Bluetooth 5.0 ; ANT+ |
| Waterproof | IP67 |
Contact us
Website: www.coospo.com
E-mail: support@coospo.com
Disclaimer
- The information presented in this brochure is for reference only. The products described may be subject to change without prior notice due to the manufacturer’s ongoing research and development program.
- We will not be responsible for any direct or indirect, incidental or special damages, losses, or expenses that arise from or are connected to this manual or the products described within it.
Note : This product is intended to assist with exercise only and is not a substitute for medical advice. (Users with cardiac pacing or other implanted devices in their bodies should always consult a doctor for advice first.)
FCC statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
SCAN for more
https://www.coospo.com/download-center-hw807/
Documents / Resources
|
COOSPO H9Z Heart Rate
Monitor
[pdf] User Manual
H9Z, H9Z Heart Rate Monitor, Heart Rate Monitor, Rate Monitor, Monitor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>