INSIGNIA Refrigerator Filter Quick Setup Guide Model #NS-MWF-2/ NS-LT600B-2/ NS-DA2920/ NS-DA2920-2/ NS-DA2903/ NS-DA2903-2

Quick Setup Guide
Refrigerator Filter | NS-MWF-2/NS-LT600B-2/NS-DA2920/NS-DA2920-2/NS-DA2903/NS- DA2903-2

Congratulations on your purchase of one of the highest performing water filters on the market today. Insignia filters use high-grade coconut carbon that has 50% more micro-pores than standard carbon. They also use fewer high- compression binders, giving you the best water filtration possible.

Package contents

• Refrigerator filter(s) (1 or 2 pack)
• Quick Setup Guide

General installation guidelines

1. YOU MUST SOAK your new filter in water for 15 minutes prior to installing it in your refrigerator. This is needed to remove air from the carbon block.
2. It is normal for black carbon fines (particles) to appear on the outside of your filter. This happens when the filter is jarred in shipping, it is safe, simply wipe it off.
3. Connections on our filters are larger in size to prevent leakage. This might require more hand leverage to install.

Installation:

*PUSH AND TURN HARD
To remove turn counter-clockwise
To install turn clockwise
Do not remove the O-ring
Filter receivers are designed to be flexible.
Don’t worry, they won’t break!

Before using your new product, please read these instructions to prevent any damage.

4 After installing, run about two to three gallons of water through your refrigerator’s water dispenser to remove air and loose carbon pieces. The water may be cloudy and sputter until the air is removed.
5 We apply a safe, NSF-approved, food-grade silicone lubricant to our filter connectors (jelly-like substance).

NS-DA2903 or NS-DA2903-2 (Samsung)

1. Remove the old filter by rotating it a quarter turn counterclockwise, then pull it straight down. The water automatically turns off.
2. Align the top of your new filter with the receiver, then push it up until it stops.
3. Rotate the filter a quarter-turn clockwise to secure the filter.
   

NS-MWF-2 (GE, Hotpoint, Amana, and Kenmore)

1. Remove the old filter by rotating it a half-turn counterclockwise, then pull it straight down. The water automatically turns off.
2. If you have a Kenmore refrigerator, check if there is a plastic or metal cap that covers the top of the old filter. If there is, pull off the cap and attach it to your new filter. If there is not, continue to step 3.
3. Align the top of your new filter with the receiver, then push it up until it stops.
4. Rotate the filter a half-turn clockwise to secure the filter, then twist a little more to prevent leaks.
   

NS-LT600B-2 (LG and Kenmore)

1. Remove the old filter by rotating a half-turn counterclockwise, then pull it out. The water automatically turns off.
2. If you have a Kenmore refrigerator, check if there is a plastic or metal cap that covers the top of the old filter. If there is, pull off the cap and attach it to your new filter. If there is not, continue to step 3.
3. Align the top of your new filter with the receiver, then push it in until it stops.
4. Rotate the filter a half-turn clockwise to secure the filter, then twist a little more to prevent leaks.

NS-DA2920 or NS-DA2920-2 (Samsung)

1. Remove the old filter by rotating it a 1/4 turn counterclockwise, then pull it out.
2. Align the top of your new filter with the receiver, then push it up until it stops.
3. Rotate the filter a 1/4 turn clockwise to secure the filter.

Before using your filter
If your refrigerator has a change filter indicator, reset it. See “Resetting your filter indicator” for instructions.

Resetting your filter indicator

Note: These are the most common filter reset instructions. If the instructions don’t work for your refrigerator brand, see the documentation that came with your refrigerator.

Troubleshooting

Storage and maintenance

• Replace your filter every three to six months to prevent bacteria and fungus growth in your filter, supply lines, and storage tank.
• Stored filters do not expire. Keep your unused filters in a cool, dark, and dry place until you need them.
• If you do not use your water dispenser for more than four days, run two gallons of water before using it to prevent bad-tasting water.
• The filters are lubricated with a safe, USDA-grade silicone. You do not need to lubricate the gaskets or receiver before installing.

Recycling your used Insignia filter

Help the environment by recycling your used Insignia filter at your local recycling facility or mail it to:
Insignia Filters
2678 Ram Bay Road
Manning, South Carolina 29102
6-month limited warranty
For complete warranty, visit www.insigniaproducts.com.
Contact Insignia
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com
CERTIFICATIONS: <SGF-G9, SGF-LB60, SGF-DA20B, SGF-DSB30>
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 BBY Solutions, Inc. All Rights Reserved.

V2 ENGLISH 14-0651

INSIGNIA Refrigerator Filter Quick Setup Guide Model #NS-MWF-2/ NS-LT600B-2/ NS-DA2920/ NS-DA2920-2/ NS-DA2903/ NS-DA2903-2 – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>