MEAN WELL NPF-120D-12 120W Single Output LED Driver Owner’s Manual

: July 13, 2024
: MEAN WELL

MEAN WELL NPF-120D-12 120W Single Output LED Driver

OWNER’S MANUAL

Features

Plastic housing with class II design
Built-in active PFC function
Standby power consumption <0.5W
IP67 rating for indoor or outdoor installations
Function options: 3 in 1 dimming (dim-to-off); Auxiliary DC output
Typical lifetime >50000hours
5 years warranty

Applications

LED panel lighting
LED downlight
LED decorative lighting
Moving sign
Type “HL” for use in Class I, Division 2 hazardous (Classified) location

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

NPF-120D series is a 120W AC/DC LED driver featuring the constant current mode output. NPF-120D operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40 C~+90 C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. NPF-120D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system.

Model Encoding

SPECIFICATION

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE

※ This series works in constant current mode to directly drive the LEDs.

DIMMING OPERATION

※ 3 in 1 dimming function

‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
‧Dimming source current from power supply: 100μA (typ.)

◎ Applying additive 0 ~ 10VDC

Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

※ Auxiliary DC operation (for BE-type)
‧ AUX+, with mark ***, is added for BE-Type, used as the Auxiliary DC output with respect to DIM-.

OUTPUT LOAD vs TEMPERATURE

LIFE TIME

MECHANICAL SPECIFICATION

※ Blank-Type

※ BE-Type

Recommend Mounting Direction

INSTALLATION MANUAL

Please refer to:http://www.meanwell.com/manual.html

Specifications:

Model: NPF-120D series
Rated Power: 120W
Output:
- Constant Current Region: 7.2 ~ 12V, 9 ~ 15V, 12 ~ 20V, 14.4 ~ 24V, 18 ~ 30V
- Current Ripple: 5.0% max. @rated current
- Auxiliary DC Output: Nominal 12V (deviation 11.4~12.6V) @0.2A for BE-Type only
Voltage Range: 90 ~ 305VAC, 127 ~ 431VDC
Frequency Range: 47 ~ 63Hz
Power Factor: PF0.97/115VAC, PF0.96/230VAC, PF0.94/277VAC@full load
Total Harmonic Distortion: THD<20%
Efficiency:
- Blank-Type: 88.5% – 90% (Typ.)
- BE-Type: 87.5% – 89% (Typ.)
AC Current (Typ.): 1.3A / 115VAC, 0.65A / 230VAC, 0.55A / 277VAC

Product Usage Instructions:

Installation:

Ensure the input voltage is within the specified range.
Connect the LED driver to the LED lighting system following the correct polarity.
Secure all connections and ensure proper grounding.