atomi neonboom Bluetooth Speaker User Manual
- June 10, 2024
- atomi
Table of Contents
atomi neonboom Bluetooth Speaker
Product Information
This product is a handheld vacuum cleaner designed for quick and easy cleaning of small messes and spills. It has a rechargeable battery and a bagless design for easy maintenance. The vacuum comes with two attachments, a crevice tool for tight spaces and a brush tool for upholstery and carpets. The vacuum has a maximum suction power of 7,000Pa and a dustbin capacity of 0.5L.
Product Usage Instructions
- Charge the vacuum before first use by plugging it into a power source using the included charging cable. A full charge takes approximately 3 hours.
- Attach the desired tool to the end of the vacuum nozzle by pressing firmly until it clicks into place.
- Press the power button located on the handle to turn on the vacuum.
- Use the vacuum to clean small messes and spills by placing the nozzle directly over the area and moving it back and forth. Use the crevice tool for tight spaces and the brush tool for upholstery and carpets.
- Empty the dustbin when it is full by pressing the release button located on the side of the vacuum and pulling out the dustbin. Empty the dustbin into a trash can and replace it by sliding it back into place until it clicks.
- When finished using the vacuum, turn it off by pressing the power button again and store it in a dry, cool place.
Thank you for purchasing the Atomi Neon Boom Speaker
The Neon Boom LED Color-Changing Bluetooth® Speaker is tuned to deliver crisp,
powerful sound with a vibrant, visual impact. Create extraordinary fun in any
indoor setting.
FCC Notice:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
What’s Inside
- LED Color-Changing Bluetooth® Speaker
- USB-C to USB-A Cable
- Wall Charger
Specifications
- USB Input: 5V DC 3A
- Speaker: 5W
- Bluetooth: Bluetooth® 5.3 – 33ft. range
Powering Your LED Bluetooth® Speaker
To turn on the speaker, use the included USB-C to USB-A cable and plug one end
into the speaker and the other end into the included wall charger. Then plug
the wall charger into any outlet and hold the Play/Pause button.
To turn it off, press and hold the Play/Pause button again.
Control Panel
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the Atomi Neon Boom Speaker near water or expose it to rain or moisture.
- DO NOT use the Atomi Neon Boom Speaker near open flames, such as candles, heat sources, radiators and stoves.
- Only clean the Atomi Neon Boom Speaker with a dry cloth.
- For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
- Please check prior use, if output voltage and current of the power supply is suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
- This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>