shopify T518LEMBI Integrated fridge Installation Guide

MODEL T518LEMBI

Integrated fridge
Installation, use, and maintenance

Important

The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that we reserve the right to invalidate the guarantee supplied with this product following the incorrect installation or misuse of the appliance.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use the appliance by someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel.

EU Declarations of Conformity: This appliance has been designed, constructed, and marketed in compliance with the safety requirements of EU Directive 2014/35/EU and requirements of EU Directive 2014/30/EU.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to 1934/2004/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.
At the end of its working life, the product must not be disposed of as urban waste. The refrigeration system contains insulating gases and refrigerants, which require specialized waste disposal. The valuable materials contained in this appliance can be recycled. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service.

Before disposing of an old appliance, remove the door seals, latch or bolt lock to avoid the risk of child entrapment.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. ****

Note: If the appliance does not have a freezer compartment ( ) it is not suitable for freezing foodstuffs.

Before first use
You must allow the fridge to settle for at least twenty-four hours prior to switching the power on.

It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly drying the interior.

Thefridgemayhaveanodourto itatfirstuse. This will disappear as the appliance cools.
Do not load the fridge with food until at least 2 hours have passed and the fridge is close to the correct temperature.

Please note:

• The appliance will work continuously until it comes down to the correct temperature.
• If the appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary damage to the compressor.
• This fridge cools your food by making the inside back of the cavity cold. It is normal for frost to build upon this surface; it then dissipates and drains through a small drain at the bottom, where it evaporates harmlessly. The presence of frosting at the back is not a malfunction of the fridge.

Defrosting the fridge
The fridge is self-defrosting. Any water created will run out of the fridge through the channel at the back of the fridge. It is important to keep the channel clear at all times. The defrosted water is collected in the evaporating tray at the back of the appliance.

Controls and Use

A. Fridge temperature adjustment sensor
This button is used to adjust the temperature within the fridge. Press this sensor once to activate adjustment, and then as many times as necessary until the desired level is selected. The settings range from 2 to 8 with 2 being the warmest and 8 being the coldest.

B. Super cool function
This should be used when cooling large quantities of food all at once. Activate this function 2 or 3 hours before introducing the food and do not leave it to run for more than necessary. Leaving it to run for longer will place unnecessary strain on the cooling system. The function will automatically deactivate after approximately 24hours.

C. Fridge temperature setting display
This display will illuminate the current temperature setting. Adjusting the temperature will cycle through this display.
Please note: You do does not use the numbers to change the temperature.
Instead, use the refrigerator temperature adjustment sensor (A).

D. Power button
Use this sensor to switch the appliance on and off (standby mode).
The sensor will be illuminated when the appliance is off.

Care and cleaning

Always disconnect the appliance from the power before any cleaning or maintenance.

• The refrigerator should be cleaned using a solution of bicarbonate of soda and lukewarm water.
• Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.
• Clean the shelves and balconies separately by hand using soap and water. Do not put them in the dishwasher.
• The evaporating tray and water drain hole (at the back of the compartment) should be cleaned periodically to prevent the defrosted water from collecting inside the compartment. The drain plug can be used to clear the drain hole.
• Once cleaning is complete, reconnect the main power supply.
• If the appliance is not used for prolonged periods of time or in the event of a prolonged power cut unplug and clean the appliance. The doors should be left slightly open to prevent the formation of mildew and smell.
• The door seal should be cleaned periodically.
• Clean the switch, lamp, and thermostat control with a dry cloth.
• Never put liquids in the refrigerator uncovered.
• Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into the refrigerator.
• Nothing should rest against the internal rear wall of the refrigerator, as this will cause frost and possible condensation problems which will be difficult to remove.

Troubleshooting

If you have any problems with your appliance, you should check the troubleshooting prior to calling Customer Care to prevent unnecessary service calls and potential costs.

If the appliance is not working

• Check if there is power to the appliance.
• The house fuses are intact and the fuse in the plug has not blown.
• The thermostat is not set to 0 (off position).
• The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the socket is working.
• The temperature of the room is adequate (10°C or above).

If the appliance is working, but not very well

• Check the appliance is not overloaded.
• The thermostat is set to an appropriate temperature.
• The door is closing properly.
• The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall.
• There is enough ventilation at the side and rear walls.
• The temperature of the room is adequate (10°C or above).

If the appliance is noisy

• Check the appliance is level and stable.
• The side and rear walls are clear, and there is nothing resting on the appliance.
• The cooling gas in the refrigerator will make a slight bubbling noise, even when the compressor is not running.

If there is water in the lower part of the refrigerator compartment

• Check the drain hole in the channel at the back of the compartment is clear.

Please note:
The LED lighting cannot be replaced without a service call. If the light fails, please contact Customer Care.

Installation AndVentilation

This appliance must never be installed close to heat sources i.e. heating elements, cookers, or in damp places

This refrigeration appliance is intended for use as a built-in appliance.

The diagram shows the ventilation requirements for your product.

Failure to provide adequate ventilation can lead to increased running costs and premature failure and may invalidate the warranty provided with the product.

Ventilation

The main consideration when installing any refrigeration unit into a fitted kitchen is ventilation. The heat removed from the cooling compartment needs to be dissipated into the atmosphere. Incorrect ventilation can lead to premature compressor failure, excessive power consumption, and total system failure. For products intended to be installed into a tall housing unit, the following requirements need to be met: –

Important
Please follow the instructions to install this unit.

The open channel at the rear is clearly shown. For the correct operation of the appliance, it is important that the top of the housing unit is not blocked off. A channel depth of 40-50mm is normal with most units.
A hole is shown in the base shelf of the unit; this allows air to be drawn over the compressor & heat exchange. Some installers fit a decorative plinth vent. In most cases, this is not required but is a  welcome aesthetic addition.
As a rule, the more air that can get in and around the appliance, the better and more efficient the operation of the product.

Climate range

The information about the climate range of the appliance is provided on the rating plate. It indicates at which ambient temperature (that is room temperature in which the appliance is working) is optimal for the operation of the appliance.

This refrigeration appliance is intended for use at an ambient temperature ranging between 10°C and 32°C

N Temperate| This refrigeration appliance is intended for use at an ambient temperature ranging between 16°C and 32°C
ST Sub Tropical| This refrigeration appliance is intended for use at an ambient temperature ranging between 16°C and 38°C
T Tropical|

This refrigeration appliance is intended for use at an ambient temperature ranging between 16°C and 43°C

Reversing the door

It is possible to reverse the door on this appliance if required. To do so, follow the steps below:

1. Loosen the top hinge fix screws and remove the top hinge, taking care to support the weight of the door.
2.  Lift the door from the bottom hinge and place it on a soft surface to protect the door from damage.
3. Refit the hinge taken from the top to the opposite lower corner, as in figure 4.
4.  Replace the door and refit the hinge taken from the lower corner to the opposite top corner.
5. Adjust the hinges to ensure the door is aligned correctly.

Mounting the fascia Door

• Using a screwdriver, fix the mounting brackets to the appliance door, as shown in figure 5.

• Position the appliance within the unit. Ensure that there is a gap of 3 to 4mm between the non-hinged side and the cabinet wall.

• Locate the slider in the bracket and fix the slider to the fascia door 20 to 22 mm from the edge of the fascia as shown in figure 6, ensuring that the slider is positioned centrally and horizontally within the bracket.
  Tighten securely by hand.

• Fill the gap on the non-hinged side with the seal strip provided, as shown in figure 7.

Electrical information

Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a BS 1363A 13 Amp fused plug. To change a fuse in this type of plug, follow the steps below:

1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3. Replace fuse cover.

Important: Do not use the appliance without the fuse cover in position.

How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of safely to avoid possible shock hazards. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:-

• The wire which is colored GREEN and YELLOW must be connected to the terminal which is marked with the letter (E) or by the Earth symbol or colored GREEN and YELLOW.
• The wire which is colored BLUE must be connected to the terminal which is marked with the letter (N), or colored BLACK.
• The wire which is colored BROWN must be connected to the terminal which is marked with the letter (L) or colored RED.

If in doubt regarding the electrical connection of this appliance, consult a qualified electrician. Do not shorten the supply cable, the appliance may require removal for servicing.

N.B. Ensure that the plug socket is situated in an easily accessible place after installation.

Practical tips

Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator chamber. The coldest area is directly above the vegetable drawers. Use this area for all delicate and highly perishable food such as:

• Fish, meat, poultry
• Sausage products, ready meals
• Dishes or baked goods containing eggs or cream
• Fresh dough, cake mixtures
• Pre-packed vegetables and other fresh food with a label stating it should be stored at a temperature of approximately 4°C

The warmest area is in the top section of the door. Use this area for storing butter and cheese.

Storage

To achieve the most effective food preservation for the longest possible time and to avoid wasting any food, position the products as shown in fig.9. In addition, this figure illustrates the layout of drawers, baskets, and shelves, which allows the most efficient use of energy.

Optimal temperature and storage conditions will extend product shelf life and optimize electricity consumption. The optimal storage temperature range should be stated on the food packaging.

1. Butter, cheeses, etc.
2. Food in jars and bottles
3. Drinks, e.g. milk
4. Cooked food
5. Yogurts, preserves, etc.
6. 75cl bottles or ready meals etc.
7. Fresh meat and fish
8. Fruit and vegetables

The fridge shelves can be moved according to the storage requirements within the fridge section. To move the shelf, lift up the rear section and then pull it outwards. To replace, slide the shelf back into the slot, and then lower the rear section.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>