HOFTRONIC 5422294 2.4 GHZ Remote Control User Manual

HOFTRONIC 5422294 2.4 GHZ Remote Control

INSTALLATION STEPS

1. Turn power on the driver (lights should be already installed in the driver)
2. Long press the Zone 1 or Zone 2 button within 5 seconds after the power is turned on. Continue to press the Zone button until the lights start flashing.
3. When the lights are flashing, the pairing is succesful.

GROUPING

1. Turn power on the driver (lights should be already installed in the driver)
2. Long press the Zone 1 or Zone 2 button within 5 seconds after the power is turned on. Continue to press the Zone button until the lights start flashing.
3.  When the lights are flashing, the pairing is succesful.
4. One driver can be connected to max 2 zones, if you have connected the driver to zone 1 and 2, you can control the driver with lights via zone 1 or zone 2. When you turn the power on the driver and hold zone 2, the zone 1 will be disconnected. Now zone 2 is connected to the driver.

TIMER FUNCTION

1. The timer function can be used when you press one of the buttons 60S, 5Min or 10Min. After you pressed one of these buttons the lights will turn off after 60 seconds, 5 minutes or 10 minutes. The light will not go on until you turn on the lights manually again.

BRIGHTNESS SETTING

1. Press the brightness + icon to add more brightness of the lights
2. Press the brightness – icon to decrease the brightness of the lights
3. If you press the middle button on the remote with the moonlight, you automatically have the correct setting for dimmed lights.

DISCONNECTING THE REMOTE CONTROLLER

1. Disconnecting the zone is possible by connecting a new zone to the driver. Turn the power on the driver and long press the desired zone button until the lights are flashing.
2. This means the driver is now connected to a new zone. If you really want to disconnect the driver from one zone, it is needed to connect the driver to 2 other zones.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

The product can only be used indoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS/GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DOCUMENTATION

This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale. Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION

The product complies with the following directives:

• LVD: 2014/35/EU
• EMC: 2014/30/EU
• RoHS: 2011/65/EU

The complete Declaration of Conformity Document (DOC) is available upon request.

Imported by HOF Trading B.V.

Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C.

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>