HOFTRONIC Flex Series RGB Dimmable LED Light Strip User Manual

HOFTRONIC Flex Series RGB Dimmable LED Light Strip

INSTALLATION DETAILS

1. Find the anode and cathode of the strip light. Connect it to the power cord.
2. The copper of the power cord should meet the anode and cathode of the strip light.
3. Plug the power cord directly into the strip light and cover the connection, by closing the clip.
4. Important : connect to a maximum of 100 m per power cord
5. Cover the exposed/open end of the strip light with the plastic cap.
6. Important: when installing the strip light outdoors, use the glue found in the box to glue the power cord connection and plastic cap to the strip light. Apply the glue all the way around the end of the strip and allow to dry. This to ensure that the strip light is waterproof.

SHORTENING THE STRIP LIGHT

The strip light can be shortened per meter. When shortening the strip light, make sure you cut at the cut marking. Use a sharp pair of scissors to ensure that the strip light will not be damage

ABOUT THE GLUE

PRODUCT DESCRIPTION

3059m special adhesive for PVC plastic is a one-component adhesive with special resin. It is used for bonding PVC (ABS + PC material), PC, PS, hips, absc, PMMA, GP, as, Electroplated Plastics and other hard adhesives. After bonding, it can be naturally cured at room temperature. The positioning time is fast. The cured adhesive has no whitening, good high and low temperature resistance, waterproof, anti-corrosion and rust resistance.

PRODUCT APPLICATION

3059m special adhesive for PVC plastic is applied to PVC plastic and PC plastic, PVC plastic shell (USB flash disk, earphone, battery box and other electronic component boxes), ABS, APET plastic ultrasonic defect patching, box removal, PC plastic toys, ABS electronic components, ABS electroplating keys, sports equipment, etc. this glue has passed various environmental protection certificates and can provide environmental protection certificates.

PRODUCT CHARACTERISTICS

Serial number 3059L 3059M 3059H one Viscosity (c.p.s) 5~10 100~500 1000~1200 three Solid content (%) twenty-five thirty thirty-five three appearance Colorless Transparent Liquid four Solubility Soluble in the glue, diluent, etc
five Curing time (hours) Positioning for 5 ~ 60 seconds and complete curing for 24 ~ 48 hours

OPERATING INSTRUCTIONS

• Step 1 : for surface treatment, the oil stain or dust on the material surface shall be removed first.
• Step 2 : apply glue. The thickness of glue shall be uniform and in place without bonding blind spots.
• Step 3 : quickly bond immediately after sizing and press to make both sides closely fit!
• Step 4 : 3059ml glue is suitable for gluing the needle. After curing, it will not turn white, no trace, fast positioning (positioning in 3-6 seconds), and has the effect of tearing the material without degumming in about 30 minutes!
• After fitting with 3059m glue, position it for about 2-3 minutes, and measure the best strength after 24 hours!
• After bonding with 3059mh glue, position it for about 15-8 minutes and completely cure it in 24 hours!
• Special adhesive PVC and acrylic glue qis-3003, instant positioning and high strength.
• Low whitening type qis-460 non whitening instant drying type
• If it is required to be transparent and traceless, 5203uv shadowless adhesive can be selected (one material must be transparent)

PACKING METHOD

50ml / piece aluminum tube, 40g / piece, 1kg / piece, 4kg / barrel, 15kg / barrel

TORAGE AND QUALITY ASSURANCE

Seal and store in a cool and dry place! Keep away from fire and children! The shelf life is 6 months at room temperature

USAGE REMOTE CONTROL

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Product can be used indoors and outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended.
This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended..

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com

DECLARATION OF CONFORMITY

DOCUMENTATION

This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.
Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

Imported by
HOF Trading B.V. Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C.
www.hoftronic.com

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>