nVent CM58812M Flange Clip With Retainer EMT 0.709 Inch-1.181 Inch OD Installation Guide
- June 16, 2024
- nVent
Table of Contents
nVent CM58812M Flange Clip With Retainer EMT 0.709 Inch-1.181 Inch OD
Product Information
Specifications
- Catalog Number: CM58812M
- Installation: Fast hammer-on installation
- Retainer Strap: Pre-riveted and easily bent into position
Product Usage Instructions
Installation
- Ensure the area where the product is to be installed is clean and free from any obstructions or debris.
- Position the product in the desired location.
- Using a hammer, firmly strike the product to secure it in place. Ensure that the product is securely attached.
Retainer Strap Adjustment
The pre-riveted retainer strap can be easily adjusted to fit your specific needs. Follow these steps:
- Locate the retainer strap on the product.
- Using pliers or similar tools, gently bend the retainer strap into the desired position.
- Ensure that the retainer strap is securely bent and holds the desired shape.
Product Safety
- It is important to follow all safety precautions when using this product. Failure to do so may result in product malfunction, property damage, serious bodily injury, and even death.
- Please read and understand all instructions and warnings provided by nVent before using this product.
Frequently Asked Questions (FAQ)
Q: Where can I find the instruction sheets for this product?
- A: Instruction sheets can be found on the nVent website at www.nvent.com or you can contact your nVent customer service representative for assistance.
Q: Can this product be installed in countries other than Europe?
- A: Yes, this product can be installed in countries other than Europe.
- Please refer to the contact information provided for specific support in different regions.
Q: Can the specifications of this product change without notice?
- A: Yes, nVent reserves the right to change specifications without notice.
- It is recommended to check for any updates or changes on the nVent website or by contacting customer service.
FEATURES
- Only one piece to install
Fast hammer-on installation
- Pre-riveted retainer strap is easily bent into position
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 1/2″;3/4″
- Rigid Conduit/Pipe Size: 1/2″;3/4″
- Outer Diameter: 0.709″ – 1.181″
- Flange Thickness: 5/16″ – 1/2″
- Static Load: 75 lb
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
- North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
- nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
- Our powerful portfolio of brands: TRACER
- 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.
- All other trademarks are the property of their respective owners.
- nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Loading......