sensata MS Series 2000W 12VDC Pure Sine Inverter Charger Owner’s Manual

: June 12, 2024
: Sensata

Table of Contents

sensata MS Series 2000W 12VDC Pure Sine Inverter Charger
Product Information
Product Usage Instructions
MS SERIES | INVERTER/CHARGER
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

sensata MS Series 2000W 12VDC Pure Sine Inverter Charger

Product Information

The MS Series inverter/charger is a line of pure sine wave inverters designed for mobile, backup, and off-grid applications.
It is powerful, easy-to-use, and cost-effective.

Features

Pure Sine Wave
Model Numbers: MS2000/12, MS2012 (-15/-20B), MS2812, MS2024, MS4024, MS4048, MS4048-20B
Battery Voltage Options: 12V, 24V, 48V
Continuous Output Options: 2000W, 4000W
Branch-rated output circuit breakers
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver TM charging modes
Physical Specifications: Dimensions, Mounting, Unit weight, Shipping weight, Max operating altitude, Temperature (Operating/Non-operating), Operating humidity
Warranty: Three years parts and labor
Agency Approvals & Certifications

Product Usage Instructions

To use the MS Series inverter/charger:

Select the appropriate model number based on your battery voltage and desired continuous output.
Make sure the unit is mounted securely on a shelf or wall. Ensure that the vents are not facing downward unless an ME-CB or MMP/MP is installed.
Connect the battery to the inverter/charger.
Turn on the inverter/charger using the power switch.
To charge the battery, select the desired charging mode (Bulk, Absorb, Float, Equalize) using the appropriate control or remote.
Monitor the inverter/charger’s performance and adjust settings as needed.

For more detailed information on installation, operation, and troubleshooting, please refer to the user manual provided with the product.

MS SERIES | INVERTER/CHARGER

PURE SINE WAVE DESIGNED FOR DEMANDING APPLICATIONS

Introduction
The MS Series inverter/charger is a line of pure sine wave inverters designed for mobile, backup, and off-grid applications. MS Series inverter/chargers are powerful, easy-to-use, and best of all, cost effective.

Features

Pure Sine Wave – Power your sensitive electronics without worry. The MS Series provides reliable, utility-grade power.
Power Factor Corrected (PFC) Charger – Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – 25-30% less AC current than standard chargers.
Battery Profile Presets – Using the ME-RC, ME-ARC, or ME-MR Remote Controls, easily choose from and set standard battery profiles, including Lithium Iron Phosphate (LFP) – only available via the ME-RC and ME-MR, Gel, Flooded, AGM1, and AGM2.
Convenient Wiring Access – An extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make wiring easier.
Choices – The MS Series is available in 12, 24, and 48- volt configurations.
Versatile Mounting – Mount the MS Series inverter/charger on a shelf, bulkhead, or even upside down.
Multiple Ports – The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Convenient Switches – The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded Transfer Relay – 60 Amp transfer service is available on all models except MS2000, which is 30 Amp only.

Model Numbers

MS2000-GL, MS2000-L-U, MS2000-L-F, MS2000-15BL-U, MS2000-20BL-U, MS2000-20BL-F
MS2012-GL, MS2012-L-F, MS2012-L-U,
MS2012-20BL-F, MS2012-20BL-U
MS2024-L
MS2812-GL, MS2812-L-F, MS2812-L-U
MS4024-L-U
MS4048-L, MS4048-20BL

Available For

Backup Systems
Marine Systems
Off-Grid Systems
RV Systems
Trucks

Available Accessories

AGS
Battery Monitor Kit
Conduit Box
DC Load Disconnect
Remote Switch Adapter
Fuse Blocks
MagWeb
Remote – ME-ARC
Remote – ME-MR
Remote – ME-RC
RV-C Bridge – ME-RVC
Smart Battery Combiner

SPECIFICATIONS

| MS2000/12 MS2012 (-15/-20B)| MS2812| MS2024| MS4024| MS4048 MS4048-20B
---|---|---|---|---|---
INVERTER SPECIFICATIONS
Input battery voltage range| 9 – 16.8 VDC| 9 – 16.8 VDC| 18 – 33.6 VDC| 18 – 33.6 VDC| 36 – 67.6 VDC
AC output voltage accuracy| 120 VAC ± 5%| 120 VAC ± 5%| 120 VAC ± 5%| 120 VAC ± 5%| 120 VAC ± 5%
Output frequency and accuracy| 60 Hz ± 0.1 Hz| 60 Hz ± 0.1 Hz| 60 Hz ± 0.1 Hz| 60 Hz ± 0.1 Hz| 60 Hz ± 0.1 Hz
Total Harmonic Distortion (THD)| < 5%| < 5%| < 5%| < 5%| < 5%
1 msec surge current (amps AC)| 50| 70| 75| 120| 120
100 msec surge current (amps AC)| 33| 40| 37| 82| 72
5 sec surge power (real watts)| 3300| 3900| 2850| 5800| 8500
30 sec surge power (real watts)| 3100| 3800| 2750| 5400| 5750
5 min surge power (real watts)| 2800| 3200| 2700| 4900| 5250
30 min surge power (real watts)| 2200| 3000| 2200| 4500| 4750
Output power (continuous watts)| 2000| 2800| 2000| 4000| 4000
Maximum continuous input current| 267 ADC| 373 ADC| 133 ADC| 267 ADC| 133 ADC
Inverter efficiency (peak)| 90.6%| 90%| 86%| 93.7%| 94%
AC Relay Transfer time (minimum)| 16 msecs| 16 msecs| 16 msecs| 16 msecs| 16 msecs
Power Consumption – searching| <8 watts| <8 watts| <8 watts| <8 watts| <8 watts
Power Consumption – inverting (no load)| 25 watts| 30 watts| 25 watts| 25 watts| 25 watts
Output Waveform| Pure Sine Wave| Pure Sine Wave| Pure Sine Wave| Pure Sine Wave| Pure Sine Wave
CHARGER SPECIFICATIONS
Continuous output at 25° C| 100 ADC| 125 ADC| 60 ADC| 105 ADC| 60 ADC
Charger efficiency| 85%| 85%| 85%| 85%| 85%
Power factor| > .95| > .95| > .95| > .95| > .95
Input current for continuous rated output| 15 AAC| 18 AAC| 7.9 AAC| 29 AAC| 30 AAC
GENERAL FEATURES AND CAPABILITIES
Transfer relay capability| 30 ACC max. each input (30AC total on MS2000 models, 60ACC total on all other models)*
Five stage charging capability| Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation| Standard with available temp sensor connected (battery temp 0-50° C)
Internal cooling| 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection| Yes, with two overlapping circuits
Overtemperature protection| Yes on transformer, MOSFETS, and battery
Corrosion protection| Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners
Branch-rated output circuit breakers| Optional on the MS2000 (15 or 20 amp breakers), MS2012 (15 or 20 amp breakers) or MS4048 (20amp breakers)
Warranty| Three years parts and labor
---|---
PHYSICAL SPECIFICATIONS
Dimensions (l x w x h)| 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) [Height on MS2000: 7.0”/17.8 cm]
Mounting| Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed
Unit weight| 42 lb (19.1 kg)| 55 lb (24.9 kg)| 41 lb (18.6 kg)| 55 lb (24.9 kg)| 55 lb (24.9 kg)
Shipping weight| 48 lb (21.8 kg)| 62 lb (28.1 kg)| 49 lb (22.2 kg)| 62 lb (28.1 kg)| 62 lb (28.1 kg)
Max operating altitude| 15,000’ (4570 m)| 15,000’ (4570 m)| 15,000’ (4570 m)| 15,000’ (4570 m)| 15,000’ (4570 m)
Temperature (Operating/Non-operating)| -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F)
Operating humidity| 0 to 95% RH non-condensing

GENERAL NOTES

*The pass-thru capability on each leg of the -15B and -20B models is limited by the output breaker size on each output. Testing for specifications at 25° C.
Specifications subject to change without notice.

AGENCY APPROVALS & CERTIFICATIONS

ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard**
The MS2000, MS2012, MS2812, MS4024 and MS4048 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use.
The MS2012, MS2812, MS4024 and MS4048 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations.
All models also meet KKK-A-1822E standards for emergency vehicle use.**

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice.
Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet.

HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON- INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF.
All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA

CONTACT US
Regional head offices:

United States of America
Sensata Technologies
Attleboro, MA
Phone: 508-236-3800
E-mail: support@sensata.com

Netherlands
Sensata Technologies Holland B.V. Hengelo
Phone: +31 74 357 8000
E-mail: support@sensata.com

China
Sensata Technologies China Co., Ltd. Shanghai
Phone: +8621 2306 1500
E-mail: support@sensata.com