Lyridz A5118 Motion Sensor Night Light Plug User Manual

: June 9, 2024
: LYRIDZ

Table of Contents

Get To Know Your LYRIDZ
Function Details
Specifications
Important Safety Information
FCC Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

A5118 Motion Sensor Night Light Plug
User Manual

Get To Know Your LYRIDZ

Lyridz A5118 Motion Sensor Night Light Plug - Figure 1

Function Details

Lyridz A5118 Motion Sensor Night Light Plug - Figure 2 | ON : Always light up
---|---
OFF : Always turn off
AUTO: Detects motion to turn on illumination in dark. Last about 90 secs

Two Ways To Adjust Beightness

Touch and hold the control panel (1-120 LM): Keep your hand on the panel until the brightness meet your need. Notice: The light will flash when adjusted to the maximum and minimum brightness.
Tap the control panel (5 brightness Levels):Tap the panel until the brightness meet your need.

Specifications

Material	ABS+PC
Sensor	Motion Sensor, Light Sensor
Light Source	LED
Voltage	US/JP :100-120Vac 50Hz/60Hz

Important Safety Information

To ensure correct and safe installation, function of the product, please follow below instructions and keep this booklet for future reference.

Do not use light around water. Avoid liquids on all electrical parts.
Clean only with a dry, soft cloth. Household cleaners or solvents can damage your light.
Do not install your light near any heat sources, such as radiators, heat registers, stoves, or any other apparatus that produces heat.
Do not block any ventilation openings.
To reduce the risk of fire or electric shock, do not expose this light to rain or moisture.
Keep packaging materials(e.g. plastic bags) out of children’s reach.
Not suitable for children under 36 months. Small parts has choking hazard.
Do not stare at the operating light source.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfe rence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Warning:
Changes or modifications to this unit not expressly approved by the partyresponsible for compliance could void the user authority to operate the equipment.

This LYRIDZ smart night light is fully compliant with the EU, CA, JP, UK and USA legislation.
When disposing this equipment, please protect our environment by means of proper disposal. Your local authorities will have special return and disposal facilities available for you.
CAN ICES-3(B)/NMB-3(B)
Made in China
Model: A5118
Linkfar Healthcare GmbHNiederrheinstraRe 71, 40474 Dusseldorf Germany
Sea&Mew Accounting Ltd 10 Duke Street, Coventry CV5 8BZ

Customer Service
12-month limited warranty
lifetime technical support
support@lyridz.com