HOFTRONIC S-SERIES LUMINAIRES Neutral White Light User Manual

HOFTRONIC S-SERIES LUMINAIRES Neutral White Light

Product Information

• Specifications
  • SKU: 2700898, 2700904, 2700911, 2700928, 2700973, 2700980, 2700997, 2701000
  • Maximum Linkable:
  • 120cm luminaires: Max 20 pieces
  • 150cm luminaires: Max 8 pieces
  • Power Cord: 8mm

Product Usage Instructions

• Installation
  • Attach the two mounting clips to the desired installation surface.
  • Remove the end cap and take out the connector. (refer to image 1)
  • Connect the main supply to the connector. (refer to image 2)
  • Place the end cap back in place.
  • Place the fixture in the mounting clips. (refer to image 3)
  • For suspended installation, refer to image 4.
• Intended Use / Application
  • Product designed for use in households and for other similar general applications.
• Functional Characteristics
  • The product can be used indoors and outdoors.
• Comments / Guidelines
  • Failure to follow instructions may result in fire, burns, electrical shock, physical injury, and other damages.
  • For more information about Hoftronic products, visit www.hoftronic.com.
  • Hoftronic shall not be responsible for any damage resulting from failure to follow instructions.
  • Hoftronic reserves the right to make changes to the manual; the current version can be downloaded at www.hoftronic.com.
• Declaration of Conformity
  • This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.

FAQs

• Q: Can the product be used outdoors?
  • A: Yes, the product can be used both indoors and outdoors.
• Q: What is the maximum number of linkable luminaires for different sizes?
  • A: For 120cm luminaires, the maximum is 20 pieces, and for 150cm luminaires, the maximum is 8 pieces.

IMPORTANT SAFETY DETAILS

1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. This product must be installed by a qualified electrician according to the instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
3. This product may NOT be installed by minors or people with a mental disability.
4. Carefully observe all instructions or warnings that are labelled on, or supplied with your product.
5. This product is suitable for standard application in humid areas and covered outside areas. If in any doubt, consult a qualified electrician.
6. Never install a defective LED fixture
7. Only work on the LED fixture in voltage-free condition.
8. The LED fixture can be used indoors and outdoors (ambient temperature of -20°C ~ 40°C).
9. Never touch the LED modules, neither in operating mode nor while switched off.
10. Due to problems with chemical resistance, choose cleaning materials that are suitable for plastic, when cleaning the LED fixture.
11. Supply connection and other external wiring conductors shall be at least 1.0mm2 and confirm to 60245IEC57

INSTALLATION

1. Attach the two mounting clips to the desired installation surface.
2. Remove the end cap and take out the connector. (image 1)
3. Connect the main supply to the connector. (image 2)
4. Place the end cap back in place.
5. Place the fixture in the mounting clips. (image 3)
6. Reference for suspended installation. (image 4)

MAXIMUM LINKABLE

• 120cm luminaires: Max 20 pieces
• 150cm luminaires: Max 8 pieces

INTENDED USE / APPLICATION

• Product designed for use in households and for other similar general applications.

MOUNTING

• Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person.
• Any activities to be done with disconnected power supply. Exercise particular caution. The product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures.
• Check for proper mechanical fastening and connection to electrical power before first use.
• The product can be connected to a supply network that meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

• The product can be used indoors and outdoors.

USAGE GUIDELINES / MAINTENANCE

• Any maintenance work must be performed when the power supply is cut off and the product has cooled down.
• Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product.
• Ensure free air access. The product may heat up to a higher temperature. The product can only be supplied by rated voltage or voltage within the range provided.
• It’s forbidden to use the product with a damaged protective cover. The product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

• Keep your environment clean. Segregation of post-packaging waste is recommended.
• This labelling indicates the requirement to selectively collect waste electronic and electrical equipment.
• Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine.
• These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising.
• Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods.
• Information on collection centres is provided by local authorities or sellers of such goods.
• Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type.
• The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

• Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage.
• For more information about Hoftronic products visit www.hoftronic.com.
• Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions.
• Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

• DOCUMENTATION
  • This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union.
  • The product complies with all applicable regulations and rules in the country of sale.
  • Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.
• CE DECLARATION
  • The product complies with the following directives:
  • LVD: 2014/35/EU
  • EMC: 2014/30/EU
  • RoHS: 2011/65/EU
  • The complete Declaration of Conformity Document (DOC) is available upon request.
  • Imported by HOF Trading B.V.
  • Fahrenheitstraat 11, 6003 DC Weert ,
  • The Netherlands
  • Made in China
  • www.hoftronic.com.
  • SKU
  • 2700898
  • 2700904
  • 2700911
  • 2700928
  • 2700973
  • 2700980
  • 2700997
  • 2701000

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>