rutec RB0000 LED Netzgerat 24V 150W Instructions
- July 8, 2024
- rutec
Table of Contents
- LED power supply 24V, 150W IP67
- 87623
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LED power supply 24V, 150W IP67
87623
MOUNTING AND OPERATING INSTRUCTIONS
IMPORTANT SAFETY-/ INSTALLATION INSTRUCTIONS:
General notes for installation
- Commission a qualified electrician to carry out the installation.
- Always ensure that the unit is installed in a location with good ventilation to ensure the correct operating temperature.
- Never connect the cables when the unit is switched on.
- Check the correctness of the connections and check for short circuits before switching on the voltage.
- Please do not carry out any repairs yourself. This will invalidate the manufacturer`s warranty.
FOR THE INSTALLATION SITE AND THE PRODUCT MUST BE TAKE INTO ACCOUNT:
The product is only suitable for indoor and outdoor use. The permissible ambient temperature for the product is -40 to +50° C.
Improper use will destroy the product and we will not accept any guarantee. Therefore, please observe our assembly instructions.
POWER SUPPLY UNITS PER CIRCUIT BREAKER:
| LS | B10 | B16 | B25 | C10 | C16 | C25 |
|---|---|---|---|---|---|---|
| Stk. | 3 | 4 | 7 | 4 | 7 | 10 |
TECHNICAL DATA:
| Input: | 220-277V AC, 50/60Hz, 186-250V DC |
|---|---|
| Output: | 24V DC, 151.2W max. |
| Ambient temperature | -40 bis +50°C |
| Psb: | 0.00 W |
| Pno: | 1.6 W |
| Efficiency at full load: | 89 % |
| Tolerance: | ±3 % |
TECHNICAL PRODUCT DIMENSIONS:
Dimensions (L x W x H):
188 x 68 x 33,5 mm
a: BROWN(ACL)
BLUE(ACN)
YELLOW & GREEN (GND)
b: AC INPUT(VDE H05RN-F 3×1.0mm²)
c: DC OUTPUT(UL SJTW 2×18AWG)
d: RED(V+)
BLACK(V-)
MARKS AND SYMBOLS:
CE-compliant with the applicable European directives
RoHS mark for products that do not contain heavy metals
(EC Directive 2002/95/EC)
REACH test mark for products whose chemical components are known, registered
and authorised
(1907/2006/EG)
Parallel connection
Suitable for through-wiring.
Independent operating device
Safety transformer, short-circuit proof
Safety extra-low voltage
Protection class I
(protective conductor connection)
Protected against temporary submersion
DISPOSAL:
Dispose of electrical and electronic equipment in an environmentally sound manner. For more information, contact your local authority.
DESCRIPTION:
GENERAL INFORMATION:
The LED power supply unit 87623 is a non-dimmable power supply on the primary side, which outputs a rectified constant voltage of 24V DC on the secondary side for a maximum power consumption of 151.2W.
WIRING DIAGRAM:
A: LED-Power supply (12 | 24 | 48 V DC)
INSTALLATION:
- First connect the LED strip to the secondary side of the power supply unit. Pay attention to the correct polarity + (anode) and – (cathode).
- Connect the primary side of the LED power supply unit to the 230 V AC mains voltage in a de-energised state, observing the five safety rules.
- Check that the input and output cables have been connected correctly before switching on the power to operate the LED power supply.
INSTALLATION NOTE:
We recommend a flexible cable and a maximum connection length of 4.0 m for the secondary connection. With a longer connection cable, design the cross- section of your cable so that the expected voltage drop is 0.2V DC to prevent a brightness or colour shift in the LED strip.
NOTES:
Carl-Zeiss-Str. 15
28857 Syke
*powered by uPowerTek
LEDNetzgerät24V150WIP67_BA_87623_05/2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>