nVent Caddy 617 Pipe Roller With Steel Frame User Guide
- June 3, 2024
- nVent Caddy
Table of Contents
nVent Caddy 617 Pipe Roller With Steel Frame
Guides & Rollers
617 PIPE ROLLER WITH STEEL FRAME
- Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
- Conforms with Federal Specification WW-H-171 (Type 45), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 44)
Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Frame and axle are carbon steel and roll is cast iron. Install in accordance with applicable code.
619 ADJUSTABLE PIPE ROLLER WITH STEEL FRAME
- Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
- Vertical adjustment is provided by adjusting bolts on each corner
- Conforms with Federal Specification WW-H-171 (Type 47), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 46) Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Frame and axle are carbon steel and roll is cast iron. Install in accordance with applicable code.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>