nVent CADDY AF14 Z Purlin Clip Owner’s Manual
- June 12, 2024
- nVent Caddy
Table of Contents
nVent CADDY AF14 Z Purlin Clip
Product Information
- Important Note:
- nVent products must be installed and used following the instructions provided by nVent to ensure safety and proper functionality.
- Installation
- Refer to the product instruction sheets available at www.erico.com or from your nVent customer service representative.
- Ensure proper installation of the product using the specified hole size (HS) and flange thickness (FT).
- Follow all warnings and instructions to prevent product malfunction and potential hazards.
- Usage
- Only use the product for its intended purpose as specified in the instruction sheets.
- Avoid misuse or misapplication of the product to prevent property damage or bodily injury.
- Do not exceed the maximum static load (F) capacity of the product to maintain safety.
FAQs
- Q: What should I do if I encounter issues with the product?
- A: If you experience any problems with the product, stop using it immediately and contact nVent customer service for assistance. Continuing to use a malfunctioning product can lead to safety risks and void your warranty.
- Q: Can I modify the product for a different application?
- A: It is not recommended to modify the product for purposes other than its intended use. Doing so may compromise its functionality and safety features, leading to potential hazards.
PRODUCT USING INSTRUCTION
- Angle flange clip for wire or chain suspensions from Z purlins
- Installs from floor with VAFT tool and conduit
SPECIFICATION
| Part Number | AF14 |
|---|---|
| Material | Spring Steel |
| Finish | nVent CADDY Armour |
| Hole Size (HS) | 1/4″ |
| Flange Thickness (FT) | 1/16″ – 1/4″ |
| B | 3/4″ Min |
| C | 2 1/2″ |
| D | 3″ |
| Static Load (F) | 100 lb |
| Certifications | cULus |
| Standard Packaging Quantity | 100 pc |
| UPC | 78285636100 |
| EAN-13 | 8711893798647 |
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.erico.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication or other failure to completely follow nVent ‘s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2018 nVent All rights reserved nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>