nVent CADDY 16M Snap Close Conduit Pipe Clamp Owner’s Manual
- June 10, 2024
- nVent Caddy
Table of Contents
nVent CADDY 16M Snap Close Conduit Pipe Clamp
Product Information
The nVent CADDY Snap Close Conduit Clamps (M-Series) are designed to secure conduit branch circuits for electrical installations. These conduit clamps are made of spring steel and have a nVent CADDY Armour finish, making them durable and long-lasting. The M-Series clamp design ensures positional consistency during installations by eliminating conduit offset while also maintaining spacing while entering electrical boxes. These clamps are available in different sizes to accommodate EMT and rigid conduits with outer diameters ranging from 0.922 inches to 1.378 inches. The static load rating of these clamps is 100 lb and 25 lb for F1 and F2, respectively. The clamps come in standard packaging quantities of 100 pieces.
Product Usage
The nVent CADDY Snap Close Conduit Clamps (M-Series) are an ideal solution for securing conduit branch circuits during electrical installations. Follow the instructions below to use these clamps:
- Select the appropriate size of the snap close conduit clamp for your conduit size.
- Place the conduit in the clamp and make sure it is in position.
- Push down on the snap close mechanism until it clicks into place, securing the conduit in the clamp.
- Repeat the above steps for all conduits that need to be secured for your installation project.
By using these snap-close conduit clamps, you can increase installation efficiency and ensure positional consistency while maintaining spacing between conduits entering electrical boxes.
Please visit nVent.com/CADDY for more information about our powerful portfolio of brands.
The nVent CADDY Snap Close Conduit Clamps (M-Series) are a fast and efficient method to secure conduit branch circuits for electrical installations. The M-Series is designed to provide positional consistency in application by eliminating conduit offset as well as maintain spacing entering electrical boxes. Increase installation efficiency by utilizing our comprehensive conduit range for your next electrical project.
FEATURES
- May be used for either vertical or horizontal installations
- Eliminates need for offset bending conduit
- Finger closure, no tools required
- Designed for the most common branch circuits
Material: Spring Steel
Finish: nVent CADDY Armour
Part Number| EMT Conduit Size| Rigid Conduit/ Pipe Size| Outer Diameter OD| Hole Size HS|
Hole Type
| Static Load 1
F 1
| Static Load 2
F 2
| Standard Packaging Quantity
---|---|---|---|---|---|---|---|---
16M| 1″, ¾”| 1″, ¾”| 0.922″ – 1.378″| ⁹⁄₃₂”| Plain| 100 lb| 25 lb| 100 pc
Dimension
Our powerful portfolio of brands
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
©2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
CADDY-DS-H87654-16M-USEN-2201
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>