YiFeng T2s 2 In 1 Wireless Charging Pad User Manual
- June 3, 2024
- YiFeng
Table of Contents
YiFeng T2s 2 In 1 Wireless Charging Pad
TROUBLESHOOTING
| INFLUENCE FACTORS| SOLUTIONS
---|---|---
1| Device Model| Check if your device is compatible, refer to the
COMPATIBILITY list.
2| Adapter and Charging Cable| The adapter and. the charging cable must be
firmly connected.
Try to reconnect the 18W adapter and charging cable in the package. If the problem persists, try another adapter of 18W or above and charging cable.
3| Protective Case|
The thickness of the protective case (non-metallic) should not exceed 0.2in (5mm).
Try to remove the case and check again.
4| Interference| Magnetic/ Metal Attachments (such as credit cards, keys, etc.) will interfere the charging.
Please remove them when charging.
5
6
| Position
Temperature
| When placing the phone, align the center area on the back of the phone with the “+”.
Do not use this product in a high temperature environment or expose it to rain or snow.
---|---|---
7| Defective Product| Please contact us through Amazon for technical support
following the steps below if the issue remains.
1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from list displayed.
5. Select Contact seller.
Specifications
Product Name: 2-in-l Wireless Charging Pad
Model Number: T2s
USB-C Input: 9V/2A, 12V/1.5A
Output: Phone 15W Max
TWS 5W Max
Watch 3W Max
LED INDICATOR
PATTER| INDICATOR
Power on| Blue light flashes once
Stand by| Lights off
Charging| Blue light stays on for 20s then goes out
Fully charged| Lights off
Suspend charging| Blue light flashes
- Please switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful interference to
radio or television reception,which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
UK
This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the product type T2S is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: https://www.YFZN.com/
EU
This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the product type T2S is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.YFZN.com/
Phone &Earphone
Radiated H-Field | -2.4 dBuA/m (@10m) |
---|---|
TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
Watch
Radiated H-Field | -25.9 dBuA/m (@10m) |
---|---|
TX/RX Frequency Range | 300-350kHz |
Shenzhen Yifeng Intelligent Technology Co., Ltd.
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng
Street, Gushu, Baoan District, Shenzhen, China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>