YiFeng M8 3 In 1 Magnetic Wireless Charging Stand User Manual

YiFeng M8 3 In 1 Magnetic Wireless Charging Stand

Specifications

• 3 in 1 Magnetic Folding Wireless Charging Stand
• Material: Aluminum Alloy+ABS+TPU
• Input: 9V 3A
• Phone output: 15W Max
• Earphone output: 5W Max
• Watch output: 5W Max
• USB-C interface

Product Information

The 3 in 1 Magnetic Wireless Charging Stand is a versatile charging solution made of high-quality materials including Aluminum Alloy, ABS, and TPU. It offers fast charging capabilities for your phone, earphones, and Apple Watch simultaneously, with dedicated power outputs for each device.

Compatibility
Compatible Devices include (Magnetic) iPhones from various models, Apple Watch Series, AirPods Pro, AirPods 2nd Generation, and more. Ensure the devices are compatible before charging.

Important Note
Please use a magnetic case to charge your phone for optimal performance and compatibility.

Product Usage Instructions

Charging Phone Only

1. Ensure the stand is connected to a power source using the included adapter or a high-quality PD 25W adapter.
2. Place your compatible phone on the charging area designated for phones.
3. Wait for the phone to charge up to the maximum output of 15W.

Charging Earphones Only

1. Connect the stand to a power source as mentioned above.
2. Put your earphones on the designated charging spot for earphones.
3. Allow the earphones to charge up to the maximum output of 5W.

Charging Apple Watch Only

1. Follow the same steps to connect the stand to power.
2. Position your Apple Watch on the charging area specified for watches.
3. Monitor the charging process until the watch reaches the maximum output of 5W.

Frequently Asked Questions (FAQ)

• Q: What should I do if my device is not charging?
  A: Make sure your device is compatible with the charging stand and properly placed on the designated charging area. Check if the stand is connected to a power source and if the adapter meets the required specifications.

• Q: Can I charge multiple devices simultaneously?
  A: Yes, you can charge your phone, earphones, and Apple Watch at the same time on the designated areas of the stand. Ensure all devices are compatible and positioned correctly for charging.

Thank you for choosing the 3 in 1 Magnetic Wireless Charging Stand. Please read this user manual carefully before use and keep this manual in a safe place for future reference.

Must be used with the included adapter or other high quality PD 25W up adapter

Specifications

• 3 in 1 Magnetic Folding Wireless Charging Stand
• Material: Aluminum Alloy+ABS+TPU
• lnput: 9V 3A
• Phone output: 15W Max
• Earphone output: 5W Max
• Watch: 5W Max
• USB-C interface

Folding tips

Currently in fully folded condition (suitable for carrying).

Lift in the direction of the arrow to 65° (to get the best view).

Spin out from right to left, rotate to adjust by 90° or 180° (for charging the watch).

Charge phone only

Charge Earphones only

Charging for Apple Watch only

Compatible Devices

• (Magnetic)iPhone 15 Pro Max/15 Pro/15 Plus/15/14 Pro Max/14 Pro/
• 14 Plus/14/13 Pro Max/13 Pro/13/13 mini/12 Pro Max/12 Pro/12/12 mini
• Apple Watch Series Ultra 2/9/8/Ultra/SE 2/7/6/SE/5/4/3/2
• AirPods Pro 2nd Generation/AirPods 3/AirPods Pro MagSafe/
• AirPods Pro/AirPods 2nd Generation
• Please use a magnetic case to charge your phone

Please Note:

1. Only use a certified PD 25W up up-charging wall Adapter to charge the device, do not plug into a computer USB port or any other non-certified USB port.
2. Place your Qi-enabled device accurately in the wireless charging area when charging.
3. PD 25W up adapter is required when charging mobile phones can be quickly charged
4. Make sure to disconnect the device from power when cleaning.
5. lt is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
6. If your device can not be fully charged, this may be due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.

Important Safety Instructions

• Do not store device in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.
• Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause an explosion.
• Do not use the wireless charger over its output rating. Overloading outputs above the rating may result in a risk of fire or injury to persons.
• Do not expose the wireless charger to rain or snow.
• Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>