YiFeng M9 3 In 1 Magnetic Wireless Charger User Manual
- June 3, 2024
- YiFeng
Table of Contents
YiFeng M9 3 In 1 Magnetic Wireless Charger
Preface
Dear users, thank you for purchasing this product . ln order to further understand the product, please read this manual carefully before use. Wish you a pleasant experience.
Specification
- Product interface: Type-C
- Material: ABS+PC+ Aluminum alloy
- Input: 9V 2A/12V 1.5A
- Watch output : 3W
- Earphone output: 5W
- Phone output: 5W/7.5W/10W/15W
- Conversion efficiency: ≥83%
- Product color: black/white (rubber oil)
Compatible Devices
- iPhone 13/13Pro/13Pro Max/13 mini/12/12 Pro/12 Pro Max/12/12 mini
- Apple Watch 7/6/SE/5/4/3/2.
- AirPods 3/ AirPods pro/ AirPods 2
Product Details
- Charging stand
- Wireless charging area for mobile phone
- Magnetic charging area for Apple watch
- TWS headset charging area
- Indicator lamp
Product display
IMPORTANT SAFETY INSTRUCTIONS
Before Using the unit, please read the user manual carefully.
- Do not store device in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F (100℃) may cause explosion.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above its rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unit. If you need to do so, please contact the manufacturer first.
- Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
Q &A
When I place the phone on the charger, it starts charging, but after a few
minutes it stops and the light starts to flash. Why?
- Make sure your device supports the Qi wireless charging function before using this wireless charger.
- Check if you are using the QC 3.0 adapter to power our wireless charger, or test with another adapter.
- Test with other USB cables.
- Check whether your device’s case contains metal. Magnetic and metal attachments will cause an LED flash and prevent charging. If the phone has a case, please make sure the thickness is less than 0.2 in or remove the case before charging.
- Please place the phone correctly. If the phone is placed in the incorrect position, it will affect charging.
- Restart your phone.
Why can’t I charge my AirPods 2?
- Make sure your device supports the wireless charging function.
- AirPods 2 is divided into two series; one supports wireless charging and the other cannot support wireless charging.
- When your AirPods 2 has an indicator on the outside of the shell, it can support wireless charging. When your AirPods 2’s indicator is inside the clam shell, it can’t support wireless charging.
- You can confirm by contacting the customer service.
EU Compliance statement:
Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares this device
in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
A copy of the EU Declaration of conformity is available online at /euro- compliance https://www.YFZN.com/
UK compliance statement：
Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares that this
device is in compliance with the essential requirements and other relevant
provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206).
A copy of the UK declaration of the conformity is available online at https://www.YFZN.com/ UKCA-compliance
RF Specification
- WPT: 110KHz-148KHz
- Radiated H-Filed: -10.48dBuA/m (@10m)
- WPT for Watch: 300KHz-350KHz
- Radiated H-Filed: -25.8dBuA/m (@10m)
Manufacturer:
Shenzhen Yifeng Intelligent Technology Co., Ltd.
Address:
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng
Street, Gushu, Baoan District, Shenzhen, China.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
THANK YOU FOR CHOOSING OUR PROUDUCT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>