YiFeng M17 3 In 1 Magnetic Wireless Charger Station User Manual

YiFeng M17 3 In 1 Magnetic Wireless Charger Station

Preface

Dear customers, thank you for purchasing our products. In order to understand the product further. Please read this manual carefully before use. We wish you a pleasant experience!

OVERVIEW

1. USB-C interface
2. Watch charging position
3. Mobile phone
4. Earphone charging position
5. Indicator light

Specifications

• 3-in-1 Magnetic Wireless Charging Station
• Input: 9V 2A 12V 1.5A
• Phone output: 15W Max
• Earphone output 5W Max
• Watch: 3W Max
• Input interface: USB-C

Compatible Devices

• iPhone13Pro Max/13por/13/13mini/12Por Max/12por/12/12mini/
• Apple Watch 7/6/SE/5/4/3/2
• Airpods/Third Generation/Pro/3/2

Indicator light description

• When the power is turned on, the blue light comes on (goes off within 2 seconds) and enters the standby mode. (goes off in 2 seconds) and enters standby mode.
• When charging the watch, the blue light will come on and go off after 20 seconds.
• When charging the phone, the blue light will come on and go off after 20 seconds.
• When charging TWS headphones, the blue light will come on and go off after 20 seconds.
• When the wireless charger is charging all three of your devices at the same time, the blue light will come on and go off after 20 seconds.
• When any of your devices are fully charged, the light will not be displayed.
• The blue light will continue to flash when the wireless charger is outputting abnormal power or when a foreign object is detected.
• The blue light will continue to flash when your adapter or data cable is low on power.
  • (For the best charging experience, please use QC3.0/20W power adapter or PD20W or larger power adapter)

Using instructions

• Turn on the power, the device will enter the standby state after the blue indicator flashes once.
• Place the Apple Watch in the stand charging area for wireless charger.
• Place the mobile phone with magnetic suction on the magnetic suction position for wireless fast charger.
• Connect the wireless charging headset to the headset charging slot for wireless charger.

How to solve abnormal charging

• Please confirm whether your mobile phone has wireless charging function before use;
• ”Check whether the phone deviates from the wireless inductive charging area of the charger;
• ‘Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;
• When metal objects touch the charging area, the charger will automatically identify and provide power off protection.
• When the temperature of the charger is too high, it will automatically start the protection.Please unplug the power supply first and use it after the charger recovers the temperature.

Q&A

Q: Why is there heating in the charging of wireless charging inductive products?
A: During the charging process, there will be a certain loss of magnetoelectric conversion, which will be converted into heat, causing the mobile phone and charger to generate heat, which is a normal phenomenon. Suggestions:

• When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger; It is recommended to stop running the background software when charging the phone.

Safety Notes

• Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field; For your safety, please do not use wet hand plug and unplug electrical appliances;
• Avoid putting it in a place easily accessible to infants and children;
• Do not use the product if it is contaminated with water or dirt;
• Non-professional personnel are not allowed to open and repair without authorization.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

IC Caution: Radio Standards Specification RSS-Gen, issue 5

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:This device may not cause interference.This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement:The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

UK

This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

Declaration of Conformity

Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the product type M17 is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: https://www.YFZN.com/

EU

This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

Declaration of Conformity

Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd.declares that the product type M17 is in compliance with Directives 2014/53/EU & 2011/65/ EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.YFZN.com/

Phone&Earphone

Watch

Shenzhen Yifeng Intelligent Technology Co., Ltd.

10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China.

References

• 一夫小说网_最值得书友收藏的网络小说阅读网

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>