YiFeng M13 2 In 1 Magnetic Wireless Charging Pad User Manual
- June 3, 2024
- YiFeng
Table of Contents
M13 2 In 1 Magnetic Wireless Charging Pad
User Manual
Preface
Dear customers, thank you for purchasing our products. In order to understand the product further. Please read this manual carefully before use. We wish you a pleasant experience!
- Product input interface
- Mobile phone/headphone charging position
- Watch charging position
- Indicator light
Specifications
Input: 12V 1.5A
- Phone output: 15W Max/Earphone output 3W Max
- Watch: 3W Max
- Input interface: USB-C
Compatible Devices
- iPhone13Pro Max/13por/13/13mini/12Por Max/12por/12/12mini/
- Apple Watch 7/6/SE/5/4/3/2
- Airpods/Third Generation/Pro/3/2
Using instructions
- Power connected, the device enters the standby state;
- Place the Apple Watch in the Magnetic charging area to conduct wireless charging;
- Put the mobile phone that supports wireless charging in the corresponding charging area for wireless charging.
Put the TWS headset that supports wireless charging in the corresponding charging area for wireless charging.
Indicator light description
- When the power is turned on, the blue indicator light is on (off within 2 seconds), and it enters standby mode;
- When the watch is charging, the blue light will turn on and off after 20 seconds;
- When the phone is charging, the blue light will turn on and off after 20 seconds;
- When charging the TWS headset, the blue light will turn on and off after 20 seconds;
- The light does not indicate when your device is fully charged
- When two devices are charging at the same time, the blue light indicates that there are charging prompts on both sides
- When the wireless charger output is abnormally charged or foreign objects are detected, the blue light keeps flashing.
How to solve abnormal charging:
- Please confirm whether your mobile phone has a wireless charging function before use;
”Check whether the phone deviates from the wireless inductive charging area of the charger;
‘Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;
When metal objects touch the charging area, the charger will automatically identify and provide power-off protection.
When the temperature of the charger is too high, it will automatically start the protection. Please unplug the power supply first and use it after the charger recovers the temperature.
Q&A:
Q: Why is there heating in the charging of wireless charging inductive
products?
A: During the charging process, there will be a certain loss of
magnetoelectric conversion, which will be converted into heat, causing the
mobile phone and charger to generate heat, which is a normal phenomenon.
Suggestions:
When the device is fully charged, disconnect it from charging in time to avoid
a long cycle of charging, which may lead to continuous heating of the device
and charger;
It is recommended to stop running the background software when charging the
phone.
Safety Notes
-
Use indoors or under dry environment, avoid placing or using in an environment of high temperature, humidity, strong static electricity, and strong magnetic field;
For your safety, please do not use a wet hand plug and unplug electrical appliances; -
Avoid putting it in a place easily accessible to infants and children; Do not use the product if it is contaminated with water or dirt;
-
Non-professional personnel is not allowed to open and repair without authorization.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with a minimum distance between 20cm of the
radiator and your body: Use only the supplied antenna.
This device was tested for uncontrolled environment operations.
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the
product type M13 is in compliance with the following Regulations: Radio
Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016,
and The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012. The full text of the UK
declaration of conformity is available at the following internet address:
https://www.YFZN.com/
This device was tested for uncontrolled environment operations. To comply with
RF exposure requirements, a minimum separation distance of 20cm must be
maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the
product type M13 is in compliance with Directives 2014/53/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.YFZN.com/
Radiated H-Field | -17.8dBuA/m(@10m) |
---|---|
TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
Shenzhen Yifeng Intelligent Technology Co., Ltd.
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park,
Hangcheng Street, Gushu, Baoan District, Shenzhen, China.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Cana da’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device. .
RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 10cm between the radiator and your body.
Phone:
Radiated H-Field | -17.8dBuA/m(@10m) |
---|---|
TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
115-205kHz(Only for FCC&IC)
Watch:
Radiated H-Field | -24.24dBuA/m(@10m) |
---|---|
TX/RX Frequency Range | 300-350kHz |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>