YiFeng P7 Multifunctional Wireless Charger Stand User Manual

YiFeng P7 Multifunctional Wireless Charger Stand

Specifications

• Input : 9V 2.66A, 12V 2A
• Watch Output : 3W Max
• Earphone Output : 5W Max
• Interface: Type-C

Product Information

The Multifunctional Wireless Charger Stand (Model: P7) is designed for charging compatible devices wirelessly. It must be used with the included adapter or other high-quality QC3.0 24W adapter for optimal performance.

Indicator Light Description:

The indicator light on the charging stand illuminates when devices are placed on it and turns off after 20 seconds. The white light indicates the charging status for earphones and Apple Watch.

Compatible Devices

Compatible devices include Apple Watch Series Ultra 2/9/8/Ultra/SE 2/7/6/SE/5/4/3/2, AirPods Pro 2nd Generation/AirPods 3/AirPods Pro MagSafe/AirPods Pro/AirPods 2nd Generation.

Please Note:

It is recommended to use a magnetic case to charge your phone for compatibility with the wireless charger stand.

Product Usage Instructions

1. Connect the charger stand to the power source using the provided adapter or a high-quality QC3.0 24W adapter.
2. Place your compatible devices (earphones, Apple Watch, etc.) on the charging stand. The indicator light will turn white to indicate charging.
3. Ensure the devices are properly aligned for efficient charging.
4. Wait for the devices to charge fully. The indicator light will turn off after 20 seconds of no activity.
5. Remove the fully charged devices from the charging stand.

FAQ

• Q: Can I charge my phone wirelessly with this charger stand?
  • A : Yes, you can charge your phone wirelessly with this charger stand by using a magnetic case for compatibility.
• Q: What should I do if the indicator light does not turn on?
  • A : Make sure the charger stand is connected to a power source and that the devices are properly placed on the stand for charging.
• Q: Can I charge multiple devices simultaneously on this charger stand?
  • A : Yes, you can charge multiple compatible devices simultaneously on this charger stand, such as earphones and an Apple Watch.

Thank you for choosing the Multifunctional Wireless Charger Please read this user manual carefully before use and keep this manual in a safe place for future reference.

Must be used with the included adapter or other high-quality QC3.0 24W adapter.

Specifications

• input : 9V 2.66A 12V 2A
• Earphone Output : 5W Max
• Watch Output : 3W Max
• Interface: Type-C

lndicator Light Description:

• The above light duration please count after the last device is placed.

Charging

• Charging only

• Charging Earphones only

• Charging for Apple Watch only

Compatible Devices

• Apple Watch Series Ultra 2/9/8/Ultra/SE 2/7/6/SE/5/4/3/2
• AirPods Pro 2nd Generation/AirPods 3/AirPods Pro MagSafe/
• AirPods Pro/AirPods 2nd Generation

Please use a magnetic case to charge your phone

Please Note:

1. Only use a certified QC 3.0/PD Charging Wall Adapter to charge the device, do not plug into the computer USB port or any other non-certified USB port.
2. Place your Qi-enabled device accurately in the wireless charging area when charging.
3. a QC 3.0/PD adapter is required when charging mobile phones can be quickly charged
4. Make sure to disconnect the device from power when cleaning.
5. lt is normal and safe to hear a humming noise when very close to the charger. lt means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
6. If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operatethe equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body

Important Safety Instructions

• Do not store the device in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.
• Do not place the device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause an explosion.
• Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
• Do not expose the wireless charger to rain or snow.
• Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.

Thank you for you choosing our product

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>