YiFeng M7 3 In 1 Magnetic Wireless Charging Stand User Manual
- October 30, 2023
- YiFeng
Table of Contents
- YiFeng M7 3 In 1 Magnetic Wireless Charging
- Product Information: 3-in-1 Magnetic Wireless Charging Stand (Model: M7)
- Important Safety Instructions
- Product Usage Instructions
- Specifications
- Folding tips
- Compatible Devices
- FCC Warning
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
YiFeng M7 3 In 1 Magnetic Wireless Charging
Product Information: 3-in-1 Magnetic Wireless Charging Stand (Model: M7)
The 3-in-1 Magnetic Wireless Charging Stand is a charging station that allows you to charge your phone, earphones, and Apple Watch wirelessly. It comes with folding tips that allow you to charge your phone or earphones separately. The charging stand is compatible with various Apple devices and comes with a USB-C interface. The device is tested for uncontrolled environment operations and complies with RF exposure requirements.
Specifications
- Input: 9V 2A
- Phone Output: 15W Max
- Earphone Output: 5W Max
- Watch Output: 3W Max
- USB-C Interface
Compatible Devices
- (Magnetic)iPhone 14 Pro Max/14 Pro/14 Plus/14/13 Pro Max/13 Pro/13/13 mini/12 Pro Max/12 Pro/12/12mini
- Apple Watch Series 8/Ultra/SE 2/7/6/SE/5/4/3/2
- Air Pods Pro 2nd Generation/Air Pods 3/Air Pods Pro Mag Safe/Air Pods Pro/Air Pods 2nd Generation
Please use a magnetic case to charge your phone.
Important Safety Instructions
Please read the user manual carefully before use and keep it in a safe place for future reference. Maintain a minimum separation distance of 20cm between the user’s body and the product to comply with RF exposure requirements. The charging stand is tested for uncontrolled environment operations and complies with Directives 2014/53/EU & 2011/65/EU, Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016, and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012.
Product Usage Instructions
- Unfold the charging stand to its full length.
- Connect the USB-C cable to the charging stand and plug it into a power source.
- To charge your phone, place it on the charging stand with the magnetic case facing up. The phone output is located on the left side of the charging stand.
- To charge your earphones, place them on the charging stand with the magnetic case facing up. The earphone output is located on the right side of the charging stand.
- To charge your Apple Watch, place it on the charging stand with the magnetic charger facing up. The watch output is located in the center of the charging stand. Note that the charging stand is only compatible with Apple Watch.
- If you want to charge your phone or earphones separately, fold the tip labeled “Charge phone only” or “Charge Earphones only”.
Please refer to the user manual for more detailed information and safety instructions.
User Manual
Thank you for choosing the 3 in 1 Magnetic Wireless Charging Station. Please
read this user manual carefully before use and keep this manual in a safe
place for future reference.
Specifications
- 3-in-1 Magnetic Wireless Charging Stand
- lnput: 9V 2A
- Phone output: 15W Max
- Earphone output: 5W Max
- Watch: 3W Max
- USB-C interface
Folding tips
- Currently in fully folded condition
Break off from right to left and rotate to adjust by 90° or 180° (for charging the watch).
-
Charge phone only
-
Charge Earphones only
-
Charging for Apple Watch only
Compatible Devices
- (Magnetic)iPhone 14 Pro Max/14 Pro/14 Plus/ 14/13 Pro Max/13 Pro/13/13 mini/12 Pro Max/ 12 Pro/12/12mini
- Apple Watch Series 8/Ultra/SE 2/7/6/SE/5/4/3/2
- Air Pods Pro 2nd Generation/Air Pods 3/Air Pods Pro Mag Safe/Air Pods Pro/Air Pods 2nd Generation
- Please use a magnetic case to charge your phone
Please Note:
- Please remove your phone case before charging if the thickness 5 mm, or if the phone case makes your phone size longer than 164 mm.
- Only use certified QC 3.0/PD charging wall adapter to charge the device, do not plug into computer USB port or any other non-certified USB port.
- Place your Qi-enabled device accurately in the wireless charging area when charging.
- A QC 3.0/PD adapter is required when charging mobile phones can be quickly charged
- Make sure to disconnect the device from power when cleaning.
- it is normal and safe to hear a humming noise when very close to the charger it means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed.
- If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. Our charger has temperature control to safeguard your device when charging.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
EU
This device was tested for uncontrolled environment operations.
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the
product type M7 is in compliance with Directives 2014/53/EU & 2011/65/EU. The
full text of the EU declaration of conformity is available at the following
internet address: https://www.YFZN.com/
UK
This device was tested for uncontrolled environment operations.
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product.
Declaration of Conformity:
Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd.
declares that the product M7 is in compliance with the following Regulations:
Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations
2016 and The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electrical Equipment 2012. The Full test of the UK declaration
of conformity is available at the following internet
address:https://www.YFZN.com/
Phone / Earphone:
TX/RX Frequency Range: | 110-148kHz(Only for EU&UK) |
---|---|
Radiated H-Field: | 3.9 dBuA/m (@10m) |
Watch:
TX/RX Frequency Range: | 300-350KHz |
---|---|
Radiated H-Field: | -27.84 dBuA/m (@10m) |
Shenzhen Yifeng Intelligent Technology Co., Ltd.
10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng
Street, Gushu, Baoan District, Shenzhen, China.
Important Safety Instructions
- Do not store device in high-temperature environment, including heat caused by intense sunlight or other forms of heat.
- Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212°F(100C) may cause explosion.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unity, if so, please contact the manufacturer. Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>