Kogan Magic 360º Spin Mop Instruction Manual
- June 7, 2024
- Kogan
Table of Contents
Magic 360° Magic Spin Mop with Roller Easy Stack Bucket and 2 Mop Heads
KAMOPSPNSBA, KAMOPSPNSBW
Safety Warnings
- Before each use, inspect the mop thoroughly to ensure it is not damaged.
- Do not expose the Spin Mop to direct sunlight or intense heat, as the mop may be damaged.
- Children should be supervised while the Spin Mop is in use.
- The bottle should only be filled with cold or warm water; do not fill the bottle with hot water. Do not add any chemicals to the water as the appliance may be damaged.
- The floor will be wet immediately after use, so ensure you take care.
- Do not leave the mop wet after use. Wipe all wet surfaces down with a dry cloth.
- Do not attempt to repair, disassemble or service the Spin Mop yourself.
Product Description
- The Spin Mop has two spin device functions which can be used to wash and dry out the mop head for optimal use.
- The Spin Mop is suitable for use on hardwood, tiles, linoleum, windows and walls.
Product Usage
-
Assembling Mop Head
Place the head under the spinning disk, then step on the disk. The mop head should make a “click” sound which means it is correctly attached. -
Disassembling Mop Head
You can put your foot onto the white mop fibres then pull the handle upwards. -
Adjusting Handle Angle
Simply turn the handle about 45°, then turn the handle left or right to set the angle that you want. The spinning disk will rotate 360°. -
Water Levels
Do not pour water up over the level mark on the bucket to avoid spillage. -
Drying Excess Water
Pull the non-slip grip downwards, while holding onto the mop handle.
If you have any further questions or concerns, please contact the Kogan.com customer support team.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>