Kogan Cordless Portable Travel Water Flosser User Guide
- June 7, 2024
- Kogan
Table of Contents
USER GUIDE
kogan.com
CORDLESS PORTABLE TRAVEL WATER FLOSSER
KACLPRWTFLA
SAFETY & WARNINGS
Ensure you have read and fully understood all these instructions. Retain this
user guide for future reference.
Important Safety Instructions
- Do not use this appliance unless you fully understand the operating and safety instructions.
- Do not operate this appliance in any other way other than what it outlined in this user guide.
- Do not dismantle or modify this appliance as this may cause damage and electric shock.
- Do not fill the water tank with water exceeding 40°C.
- If the appliance is dropped in the water while charging, always unplug it before attempting to remove it from the water. Cease use immediately and contact Kogan.com for support.
- Do not operate any appliance with a damaged charger, cord, or plug or after the appliance malfunctions or has been damaged or dropped into water. Cease use immediately and contact Kogan.com for support.
- Do not expose this appliance or its power cord to fire and other sources of heat.
Caution
- Do not apply excessive force to your teeth or gums.
- When not in use, store this appliance safely to avoid it being damaged or dropped into water.
- Do not immerse the appliance in water as this may lead to malfunction, cause fire, electric shock or explosion.
- Do not plug or unplug this appliance with wet hands.
- Ensure that your power outlet voltage corresponds to the voltage stated on the rating label.
- Do not drag, bend, warp or place a heavy objects on the power cord as this may cause damage.
- Grasp the plug when removing the appliance from the power outlet. Never remove by pulling the power cord.
- Always unplug the appliance before cleaning or performing maintenance.
- Do not expose this appliance to fire, high-temperature or moist environments and avoid excessive exposure to direct sunlight.
- Do not charge the appliance in high-temperature or moist environments such as bathrooms or toilets.
- Always unplug the appliance if it is not being used for an extended period.
Note
- This appliance features non-serviceable parts. If it needs to be repaired, contact Kogan.com for support.
- Do not use the appliance without a nozzle attached.
- Do not fill the appliance with the mouth wash as this may cause corrosion.
- This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
- Do not allow children to play with the appliance.
- If you have had any recent dental surgery or procedures, please consult your physician before using the appliance.
OVERVIEW
OPERATION
Charging the flosser
-
Plug the power cord into the charging port.
-
Plug the power cord into a power outlet.
-
The charging indicator on the main body will begin blinking.
Note: The water flosser will take approximately 4 hours to fully charge. -
When the water flosser is fully charged the indicator light will stop blinking and remain on.
Nozzle
- Ensure the appliance is turned off.
- Insert the nozzle into the hole on the top cover.
- If need to remove or replace the nozzle, ensure the appliance is off then press the nozzle release button and remove the nozzle by pulling upwards (Figure 1).
Filling the water flosser
- Open the water tank lid.
- Holding the main body horizontally fill the water tank with clean water (Figure 2).
- Close the water tank lid.
Note: Do not fill the water tank with water exceeding 40°C.
Using the water flosser
- Press the Power button to begin the flow of water.
- Holding the water flosser vertically, insert the nozzle into your mouth, aiming the flow of water at your gums or teeth.
- Ensure the nozzle is kept parallel to your teeth and gums. Do not aim the nozzle directly into the periodontal pocket (Figure 3)
- Keep your mouth slightly open allowing the water to flow out into your sink (Figure4).
- The water flosser will automatically turn off after 2 minutes. If you need to continue using the flosser press the Power button to start the flow of water again.
Changing flossing modes
The water flosser features four different flossing modes: Normal, Soft 1, Soft
2 and Pulse. Press the Power button during operation to cycle between the
modes.
- Normal: For the normal cleaning of teeth.
- Soft 1: For the users with sensitive teeth.
- Soft 2: For the users with sensitive teeth. This setting is recommended for first-time users.
- Pulse: This mode is used for massaging gums which to help promote blood circulation and strengthen the teeth.
Note : It is recommended to use the “Soft 2” mode for at least week.
Emptying the water tank
After usage, the water tank should always be completely emptied.
- Holding the water flosser horizontally, open the water tank lid and allow the water to drain out (Figure 5).
- Press the Power button to ensure no residual water is left in the water tank.
- Close the water tank lid and wipe the flosser with a dry cloth.
Note:
When not in use the water flosser should be free of residual water to avoid
bacterial infection. If it is not used for an extended period of time, ensure
to clean the water flosser well, then dry and store it.
CLEANING & CARE
The water flosser can be cleaned with water or mild detergent. No not use any corrosive or abrasive detergent as it will damage the water flosser. Do not clean with water exceeding 50°C.
Cleaning the body:
• Clean the body with a dry or damp cloth.
• Do not immerse the body in water for cleaning.
Cleaning the water tank
• Wipe the water tank with a dry or damp cloth.
• The water tank can be detached and rinsed with water.
• Ensure the water tank is clean and completely dry if it is not being used
for an extended period.
Cleaning the nozzle
• Wipe the nozzle with a dry or damp cloth.
• The nozzle can be detached and rinsed with water.
• Do not bend, pull or warp the nozzle.
• It is recommended to replace the nozzle every 6 months.
Cleaning the charger
Wipe the metal part of plug with dry cloth every 6 months to avoid dust
accumulation which may result in poor contact.
TROUBLESHOOTING
Problem
| Possible cause|
Solution
---|---|---
The water flosser will not turn on.| The battery is flat.| Charge the water
flosser for at least 24 hours.
The water pressure is low.| The nozzle is blocked.| Replace the nozzle.
The filter is blocked.| Clean the filter.
The water flosser only operates for a short time afterbeing charged.| The
battery is dead.| Contact Kogan.com.
The water flosser has not been fully charged.| Charge the water flosser for at
least 24 hours.
The charging indicator does not illuminate when charging.| The power cord is
not properly connected.| Check the power cord connections.
Circuit malfunction.| Contact Kogan.com.
Declaration for hazardous substances
Declaration for Hazardous Substances
Part name| Hazardous Substances
Pb| Hg| Cd| Cr (VI)| PBB| PBDE
PCB| X| O| O| O| O| O
NOTE: “X” means YES; “O” means NO.
Disposal of rechargeable battery
Do not dismantle the water flosser unless it is being discarded. Please unplug
the appliance before removing the battery.
1. Ensure that the battery has been exhausted before removing it. To
discharge the battery, press the Power button to turn on the water flosser and
continue to run it until it stops working. Repeat several times until the
battery is completely flat.
2. Remove the water tank and detach the top cover
3. Remove the unit core.
4. Unscrew the screws on the bracket of the unit core using a Phillips head
screwdriver (Figure 6).
5. Cut off the connecting wires of the battery and the charging cable with scissors, then remove the battery (Figure 7).
6. Recycle or dispose the battery correctly. And please consult the local waste disposal authority for the recycle of other components of water flosser.
Note :
Do not short-circuit the battery and do not attempt to power the water flosser
after removing the battery.
Disposal
| This marking indicates that this appliance should not be disposed of with
other household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
---|---
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>