ROBUS Harbour 28w Led Corrosion Proof Installation Guide

June 7, 2024
ROBUS

robus

ROBUS Harbour 28w Led Corrosion Proof

product

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician

Note:
Product technical information and specification may change over time without prior notification.
For the latest technical information please visit our web site www.robus.com or robusdirect.com

-25°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65
Luminaire is non-dimmable
Complies with RHA2WEMPK-PSU / RHA2WEMST-PSU emergency pack, (3-hour emergency duration). Note: Please note that when using the RHA2WEMST-PSU it is not possible to wire through the RHA28405FT-24

Installation

  1. Ensure mains supply is switched off before commencing work.
  2. Select suitable location for luminaire.
  3. Safety note! The power supply cord must not be exposed to mechanical damage.
  4. Disassemble the fitting base from the fitting.
  5. Mark appropriate fixing hole positions on wall, check location of buried cables, pipes and other building services before drilling.
  6. Drill holes in the ceiling and attach brackets to the ceiling.
  7. Feed supply cables through cable entry hole and attach base to brackets.
  8. Connect supply: Live SL– Brown, Neutral –Blue and Yellow/Green – Earth.
  9. Refit metal plate to base and ensure that it fits securely.
  10. Attach diffuser to base using clips provided.Install

Note: This luminaire has no user serviceable parts. If damaged, disconnect from mains and discontinue use.

Information for the Product user:

  1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
  2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
  3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
  4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations

robus

Nangor Road Dublin 12 D12E7VP Ireland
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ROBUS User Manuals

Related Manuals