FIBARO FGWCEU-201 Walli Controller Instruction Manual

: June 6, 2024
: FIBARO

Table of Contents

Specifications
Warnings
Basic activation of the device
Operation modes
WARRANTY TERMS AND CONDITIONS
Documents / Resources

FIBARO FGWCEU 201 Walli Controller-

WALLI CONTROLLER
FGWCEU-201

FIBARO-qr http://manuals.fibaro.com/walli-controller

Read the full manual before attempting to install the device!
For full instruction manual and technical specification please visit our website.

FIBARO Walli Controller is a smart wall-mounted Z-Wave remote controller that can activate scenes or control other Z-Wave devices via associations. You can install it on a flat surface with a battery or on the mounting box with a battery or external power supply (using the connector included 4 ). For more information about the connection with the external power supply, see the full manual.

Specifications

Power supply	Battery and/or power supply unit
Battery type	ER14250 ½AA 3.6V (included)
Supply unit type	5–24V DC, LPS, or NEC class 2 (not included)

Operating temperature
Ambient humidity| 0–40°C
0-90% RH without
condensation
Radio frequency band| 868.0–868.6MHz;
869.7–870.0MHz
Max. transmitting power
Dimensions (H x W x D)| +13dBm
86 x 86 x 20 mm

Warnings

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law. Observe national regulations. Do not expose this product to moisture, water, or other liquids. Do not use in bathrooms and other high humidity rooms. This product is designed for indoor use only. Do
not use outside! This product is not a toy. Keep away from children and animals! Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. The device features a built-in temperature sensor, for accurate temperature readings, install the device far from
sources of heat (e.g. radiators, power supplies). Do not use double-sided adhesive tape when mounting the device on the electrical junction box.

Basic activation of the device

Installation on a smooth surface with battery supply

Remove the button cover 1.
Remove the paper strip protecting the battery.
LED ring light means the device is powered.
Insert the button cover back 1.
Remove the mounting frame from the device 2.
Use the included double-sided stickers 3 to stick the mounting frame to the smooth surface.
Push the device onto the mounting frame of the device, you should hear an audible click.

Installation on a mounting box with battery supply

Remove the mounting frame from the device 2.
Place the mounting frame onto the mounting box and secure it with screws.
Push the device onto the mounting frame of the device, you should hear an audible click.
Remove the button cover 1.
Remove the paper strip protecting the battery.
LED ring light means the device is powered.
Insert the button cover back 1.

Adding the device to the controller

Set the main Z-Wave controller into adding mode.
Quickly, three times click one of the buttons.
Wait for the device to be added to the system.

Operation modes

Buttons can act differently according to the specified mode: scene controller (default), double button, single button, switch controller, dimmer controller, roller shutter controller, Venetian blinds controller.

WARRANTY TERMS AND CONDITIONS

FIBAR GROUP S.A. with its registered office in Wysogotowo, ul. Serena 3, 62-081 Wysogotowo, entered into the Register of Entrepreneurs of the National Court Register maintained by the District Court for PoznanNowe Miasto and Wilda in Poznan, VIII Commercial Division of the National Court Register (KRS) under number: 553265, NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100 paid in full, other contact information is available at: fibaro.com (hereinafter „the Manufacturer’) guarantees that the device sold (hereinafter: „the Device” is free from material and manufacturing defects.
The Manufacturer shall be responsible for the malfunctioning of the Device resulting from physical defects inherent in the Device that cause its operation to be incompatible with the specifications within the period of: – 24 months from the date of purchase by the consumer, – 12 months from the date of purchase by a business customer (the consumer and business customer are further collectively referred to as „Customer”).
The Manufacturer shall remove any defects revealed during the guarantee period, free of charge, by repairing or replacing (at the sole discretion of the Manufacturer) the defective components of the Device with new or regenerated components. The manufacturer reserves the right to replace the entire Device with a new or regenerated The Manufacturer shall not refund the money paid for the device.
Under special circumstances, the Manufacturer may replace the Device with a different device most similar in technical characteristics.
Only the holder of a valid guaranty document shall be entitled to make claims under guarantee.
Before making a complaint, the Manufacturer recommends using the telephone or online support available at https://www.fibaro.com/support/.
In order to make a complaint, the Customer should contact the Manufacturer via the email address given at https://www.fibaro.com/support/.
After the complaint has been properly filed, the Customer will receive contact details for the Authorized Guarantee Service LAGS”). The customer should contact and deliver the Device to AGS. Upon receipt of the Device, the manufacturer shall inform the Customer of the return merchandise authorization number (RMA).
Defects shall be removed within 30 days from the date of delivering the Device to AGS The guarantee period shall be extended by the time in which the Device was kept by AGS.
The faulty device shall be provided by the Customer with complete standard equipment and documents proving its purchase.
The cost of transporting the Device in the territory of the Republic of Poland shall be covered by The cost of the Device transport from other countries shall be covered by the Customer. For unjustified complaints, AGS may charge the Customer with costs related to the case.
AGS shall not accept a complaint claim when: – the Device was misused or the manual was not observed,
– the Device was misused or the manual was not observed,
– the Device was provided by the Customer incomplete, without accessories or nameplate,
– it was determined that the fault was caused by other reasons than a material or manufacturing defect of the Device
– the guarantee document is not valid or there is no proof of purchase,
The guarantee shall not cover:
– mechanical damages (cracks, fractures, cuts, abrasions, physical deformations caused by impact, falling or dropping the device or other object, improper use or not observing the operating manual);
– damages resulting from external causes, e.g.: flood, storm, fire, lightning, natural disasters, earthquakes, war, civil disturbance, force majeure, unforeseen accidents, theft, water damage, liquid leakage, battery spill, weather conditions, sunlight, sand, moisture, high or low temperature, air pollution;
– damages caused by malfunctioning software, attack of a computer virus, or by failure to update the software as recommended by the Manufacturer;
– damages resulting from surges in the power and/or telecommunication network, improper connection to the grid in a manner inconsistent with the operating manual, or from connecting other devices not recommended by the Manufacturer.
– damages caused by operating or storing the device in extremely adverse conditions, i.e. high humidity, dust, too low (freezing), or too high ambient temperature. Detailed permissible conditions for operating the Device are defined in the operating manual;
– damages caused by using accessories not recommended by the Manufacturer – damages caused by the faulty electrical installation of the Customer, including the use of incorrect fuses;
– damages caused by Customer’s failure to provide maintenance and servicing activities defined in the operating manual;
– damages resulting from the use of spurious spare parts or accessories improper for a given model, repairing and introducing alterations by unauthorized persons;
– defects caused by operating faulty Devices or accessories.
The guarantee shall not cover the natural wear and tear of the Device and its components listed in the operating manual and in technical documentation as such elements have a defined operational life.
The Device Guarantee shall not exclude, limit or suspend the Customer’s warranty rights.
The Manufacturer shall not be liable for damages to property caused by the defective devices. The Guarantor shall not be liable for indirect, incidental, special, consequential, or punitive damages, or for any damages, including, inter alia, loss of profits, savings, data, loss of benefits, claims by third parties, and any other damages arising from or related to the use of the Device.

Simplified EU declaration of conformity:
Hereby, Fibar Group S.A. declares that the
the device is in compliance with Directives
2014/53/EU and 2011/65/EU, 2015/863.
The full text of the EU declaration conformity is available at the following internet address: www.manuals.fibaro.com

WEEE Directive Compliance:
Device labeled with this symbol should not be disposed of with other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and electronic equipment.

105475410101

Documents / Resources

| FIBARO FGWCEU-201 Walli Controller [pdf] Instruction Manual
FGWCEU-201, Walli Controller
---|---
| FIBARO FGWCEU-201 Walli Controller [pdf] User Manual
FGWCEU-201, Walli Controller
| FIBARO FGWCEU-201 Walli Controller [pdf] User Manual
FGWCEU-201 Walli Controller, FGWCEU-201, Walli Controller, Controller