olayks 32LUV Sterilizer Cabinet Instruction Manual

olayks 32LUV Sterilizer Cabinet

Thank you for using our desktop utensil sterilizer.
The desktop utensil sterilizer is a new household appliance characterized by its compact appearance, large internal capacity, innovative structure, and beautiful design. It features functions such as draining, drying, disinfecting, and storing, making it a very practical health guarantee for families and personal use.

Product Illustration

Precautions

Warning
Drain the water from the utensils before placing them in the sterilizer. Do not put dish towels or other non-utensil items inside.

1. Close the door of the sterilizer before using it, otherwise, UV radiation will escape.
2. Open the door of the sterilizer 20 minutes after the sterilization process is complete to avoid burns.
3. If you need to open the door of the utensil sterilizer during operation, first press the “power off” button or cut off the power supply before opening the door. Be careful, as the temperature inside may be high, to avoid burns.
4. If you find during use that UV light is visible directly through no transparent materials (such as glass or transparent parts), stop using it immediately and notify a professional for maintenance.
5. The accumulated water in the drip tray needs to be cleaned every 5-7 days to prevent bacterial growth.

| Before use, remove the paper lining inside the cabinet, the nylon ties from the shelves, and the protective film to avoid fire.
---|---
When using the sterilizer for the first time in the no-load mode, run it for one cycle and then open the lid for 20 minutes to remove plastic odors.
Drain water before placing items, do not place dishcloths or non-tableware items inside.
If any abnormal conditions occur (noise, smell, temperature rise, smoke), unplug the unit and contact the service center or dealer for inspection and repair before reuse.
If you can see the UV lamp light directly, stop using it immediately and contact the service center or dealer for repair.
If the UV lamp is damaged, it must be replaced by professional personnel arranged by the service center or dealer with the same power and wavelength.
Unplug before maintenance to ensure complete power disconnection.
If the power cord is damaged, it must be replaced by professional personnel arranged by the service center or dealer.
Unplug after drying.
Proper maintenance extends lifespan.
| Do not place in damp areas.
Do not use heaters next to the sterilizer to avoid deformation and malfunction.
Do not install near-flammable materials.
Do not open the door during operation to avoid affecting the sterilization effect and burns.
Special groups (e.g., children) should not use this appliance.
| Disposal of old appliances: For items beyond the safe use period or not worth repairing, send them to qualified recycling companies, dealers, or service agencies. Do not discard or disassemble yourself.

Special Note

• Drain water before placing items in the sterilizer.
• Do not let children play with plastic films and boxes to prevent suffocation.

Instructions for Use

Control Mode

1. Place the utensils inside and close the door.
2. Press the selection switch button, and the first operating mode indicator lights up and flashes for 3 seconds before automatically entering the working state.
3. If you need to switch to another working mode, press the selection switch button again while the indicator is flashing to automatically switch to the next mode.

working cycle is 45 minutes (some models do not have UV lamps and negative ions)

Quick| 2Omin| The product’s hot air/UV lamp/negative ion combination

working cycle is 20 minutes (some models do not have UV lamps and negative ions)

Energy- Saving| 6Omin| The product’s hot air/UV lamp/negative ion combination working cycle is 60 minutes (some models do not have UV lamps and negative ions) and is about20% more energy

efficient than the automatic mode.

Baby| 6Omin| The product’s hot air/UV lamp/negative-ion combination working cycle is 60 minutes (some models do not have UV lamps and negative ions) and is suitable for children’s tableware or toys that are resistant to high temperatures up to 80°C.
Cool Wind| 1Omin| Fan works for 10 minutes

Main Specs

Maintenance and Service

1. Daily Maintenance and Repair Service
   Regular use, at least once a week, can effectively prevent bacterial growth.

2. Drain the water from the utensils before placing them in the sterilizer. Do not put dish towels or other non-utensil items inside.

3. If abnormal phenomena occur during use, stop using it immediately and unplug it. Have the appliance dismantled and checked by a professional or a repair service designated by the manufacturer.

4. If the power cord is damaged, contact the repair service designated by the manufacturer or a professional to repair or replace it.

5. If you need repair service, please contact our after-sales service department

Troubleshooting

or replace
Power cord breakage| Replace the power cord
The circuit board is damaged| Replace the circuit board
Normal operation without heating| Heating wire fuse separation| Replace the heating element
UV lamp does not work| The UV lamp is damaged| Replace the UV lamp

Environmental List

Environmental List

According to the provisions of the “Regulations on the Restriction of the Use of Hazardous Substances in Electronic Products” of the People’s Republic of China, the names and contents of hazardous substances or elements that may be contained in electronic products are listed in the table below.

Component Name

| Toxic and Hazardous Substances or Elements
 |  |  |  | |
(Pb)| (Hg)| (Cd)| (Cr(VI))| (PBB)| (PBFE)
Top Cover| 0| 0| 0| 0| 0| 0
Transparent

Rear Cover

| 0| 0| 0| 0| 0| 0
Gray Component

Buckle

| 0| 0| 0| 0| 0| 0
Water Receiving

Box

| 0| 0| 0| 0| 0| 0
Metal Frame| 0| 0| 0| X| 0| 0
Metal Frame

Tableware Holder

| 0| 0| 0|

X

| 0| 0
Control Board| X| 0| 0| 0| 0| X
Heating

Component

| 0| 0| 0| X| 0| 0
Power Cord|

X

| 0| 0| 0| 0| 0
Packaging Material

and Stickers

| 0| 0| 0| 0| 0| 0
This table is prepared according to SJ/T11364 regulations

0: The content of the toxic and hazardous substances in all homogeneous materials of this component is below the limit requirements of GBT26572.

x: Indicates that the content of the toxic and hazardous substances in a certain homogeneous material of this component exceeds the limit requirements of GBTT26572

Explanation of Hazardous Substances: The hazardous substances content of the materials used in our products complies with the limit requirements of GBT26572. Components marked with “x” cannot be replaced due to current global technology levels. We will strive to achieve replacement as technology advances. Any upgrades will be included in the new version of the manual.

Product Warranty Card

The product warranty card is attached to each product and should be kept properly by the customer.
Lost cards will not be reissued.

Warranty Conditions

1. The warranty period is one year. During the warranty period, our company is responsible for free repairs.
2. The start date of the warranty period is the purchase date on the receipt, and a valid receipt must be presented.
3. During the warranty period, the following situations are not covered by free warranty:
   • Faults caused by improper installation or use not according to the manual;
   • Unable to provide valid purchase receipts;
   • Damage is not caused by product quality issues but by human factors.
   • Damage caused by improper maintenance, care, or misuse.
4. Please present the “Product Warranty Card” or a valid receipt when requesting a repair.

If the user is not satisfied with the service provided by the company’s authorized repair unit, they can directly complain to the company’s after- sales service department.

CONTACT

• No. 101, Xingpu West Avenue, Huangpu Town, Zhongshan City, Guangdong Province
• National Service Number: 400-8865-789
• Manufacturer: Zhongshan Yuechu Electrical Appliance Technology Co., Ltd.
• Address: No. 99, Donghai West Road, Anle Village, Dongfeng Town,
• Zhongshan City, Guangdong Province

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>