kogan SmarterHome Wireless Smart Video Doorbell Chime User Guide

Kogan SmarterHome Wireless Smart Video Doorbell
with Chime
KASHSDRBELA
Quick Start Guide

Overview

Product Drawing

Power Supply

Hardwire Power Source

Notice :
Bell transformer is not included.
Please operate under the direction of a professional.

Powered by Battery

Warning :

• *       *  Please note the battery polarities. Insert the 2 batteries with positive sides upwards.

  • Incorrect battery installation can damage the device and may cause a fire.

Application Guide

Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS).

Register SmarterHome Account

If you do not have a Kogan Smarter Home account, register or sign in with a verification code sent by SMS.
To register:

1. Tap to enter the registration page
2. The system automatically recognizes your country/area. You can also select your country code manually. Enter your mobile phone number/ email address and tap “Next”.
   If you choose the mobile phone number option, then enter the verification code in the message sent to you by SMS. Set a password as prompted and press “Confirm” to finish your registration.
   

Create a profile on the next page to define your location and room.

Add Device Through Network

1. Power the SmarterHome device on and follow the product-specific instructions to enter the Wificonnect mode.

2. Open the Kogan SmarterHome app and tap “+” in the upper right to add a new device through the network.

3. Select the type of device you want to connect to on the next screen.

4. Ensure the device’s indicator light rapidly flashes and tap “Confirm light is rapidly flashing”.

5. Select Wi-Fi network (note: network must be 2.4Ghz band) and enter the password.
   The device will commence the pairing process and connect to the app.
   

6. After successfully configuring the devices, the device will be shown on the home page. Tap to enter its control page.
   

Installation

1. Positioning the mounting bracket.
   

2. Install the mounting bracket.
   

3. Place the device on the bracket
   

4. Tighten the security screw.
   

Specifications

Video & Audio|
---|---
Image Sensor| 1/4″ CMOS OV9732
Resolution| 720P
Effective Pixels| 1280x720px
Frame Rate| 1 ~25 FPS
Infrared LED| 6 pcs IR LED, IR range: 6m
Lens| 1,7mm/F2.0
Scene Angle| 166°
Min. Illuminance| Color: 0.01 Lux: B&W: 0.001 Lux
Image Setting| BLC, Infrared, HLC, Motion Compensation, WDR
Audio| Two-way audio intercom with noise cancellation
Storage|
Storage Type| Micro SD Card (Max 32G)
Video Length| 15s/30s/45s Settable
Recording| Triggered by push button or PIR motion sensor
Network|
Wi-Fi Frequency| 2.4GHz
Standards| IEEE 802.11 b/g/n
Live View Speed| within 3 ~4 Sec
Application|
App Name| SmarterHome
OS| iOS android
Remote View| Within 2 sec
Notification| Notification push within 2 sec
Other|
Working Temp & Humidity| -20°C ~+50°C: <90% (No condensation)
Power| 18650 Battery x 2 or by hardwire power 8V-24V AC
Standby Current| 170M
Working Current| 200mA
Standby Time| 6 ~8 Months
Working Time| 4~6 Months (10 times wake up per day)
Battery| Rechargeable 18650 Battery
Device Sharing| Up to 5 users, (support 3 user live view simultaneously)
Size (mm)| 67 x 38 x 136
Weight (g)| 300

Chime

Product Drawing

Features

1. Plug & Play, easy to install and use.
2. Five Levels Volume Control, max volume: 110 decibels.
3. 40 Ringtones, with LED indicator.
4. 650ft/200m Wireless Working Range in Open Area.
5. No batteries, small in size, low power consumption.
6. Wireless connection with video doorbells; Support “one-to-many” and “many-to-one” paring.

First Time Use

1. Plug the chime into an outlet. The default ringtone “Ding-dong” will be played at volume level 5, with the LED indicator blinking.
2. A short press on the volume control button to adjust the volume. Level 1: mute (only the indicator flashes). Level 2 ~ 5: the volume gradually increases.
3. Ringtone selection:
   Press on “previous/ next button” to select ringtone.
   Press and hold “volume control” for 5 sec to use the selected ringtone.

Chime Pairing

1. Select your favorite ringtone, press and hold the volume control button for 5 seconds till you heard a “ding” sound. The chime will be in pairing mode for 8 seconds.

2. Press the call button 1-2 times on a video doorbell nearby, and a “ding-ding” alert sound will be heard from the chime. Pairing succeeds.
   Note: The chimes and doorbells support “one-to-many” & “many-to-one” pairing.

3. Press again the call button on video doorbell, and the indoor chime will alert with the selected ringtone, LED indicator blinking.

Clear Connection

1. Press & hold the next button for 5 seconds till you hear a “ding”.
2. The indoor chime will be restored to factory default.

Chime Specifications

Troubleshooting

share the device to 5 other users in app and maximum 3 users can view live video simultaneously.
2. The doorbell cannot be connected.| a).   The device works with 2.4GHz Wi- Fi only, but not support 5GHz Wi-Fi.
b).   Wi-Fi network is not good, try to keep the doorbell near the Wi-Fi router when setting up. O. The Wi-Fi password is wrong. Please check if there are special characters in the password or the network is specially encrypted.
3. How do I know if I have 2.4G or 5G Wi-Fi?| Please check the user manual of your Router or call the network operator for help.
4. It has to be on same Wi-Fi to see its video or is it over internet from anywhere?| You can access to the device anywhere, if it is connected to the internet.
5. Do any of the recordings get saved to the cloud? Or it is mainly saved in the built-in SD card?| It is mainly saved in the built-in SD card.
6. Can you have two units ringing same chime & also work on one app.| Yes, the video doorbell and its indoor chime support “one-to-many” and “many-to- one” wireless connection.
7. What type of smartphone is needed for this device?| iOS and Android smartphones are supported.
8. How can the doorbell be linked to two different phones?| You can log in one device and share it with your family in setting menu.
9. How long does it take to charge the batteries?| About 10 hours.
10. What happens when the SD card is full? Will the doorbell automatically erase oldest footage for new ones?| When the memory card is full, the doorbell automatically erases the oldest footage.
11. Does it work with Google Home?| No, it does not work with Google Home.
12. Why does it lose connection to Wi-Fi?| Please check the network connection of your phone and the Wi-Fi router. If the network signal is not good, device may not be connected.
13. Can the motion detection be disabled, and can it be set to record automatically with motion detection?| Yes. Recording is triggered by detected motion. And users can disable motion detection in app setting menu.
14. Does it come with charger for the batteries?| Battery charger is not included. However, you can charge the batteries with DC 5V 1A-2A power adapters (same as the charger for most Android smartphones).
15. Can you have 2 doorbells (front & back) at same residence?”| Yes, you can add as many as you like to your device list.

In the Box

User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>