MOEN 1″ Smart Home Water Monitoring Leak Detection System Instructions

: June 7, 2024
: Moen

Table of Contents

MOEN 1″ Smart Home Water Monitoring Leak Detection System
OPERATION
Parts
Specifications
DESCRIPTION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Moen

MOEN 1″ Smart Home Water Monitoring Leak Detection System

Product

DESCRIPTION: Smart home water monitoring and leak detection system

OPERATION

Remote, automatic, and manual water on/off (shut-off) capability
WiFi enabled device for smartphone connectivity
Smartphone app available for iOS and Android that provides the following:
- Proactive maintenance alerts (i.e. leak alert, pressure alerts, etc.)
- Remote water control and shut-off
- Set water consumption goals and monitor water usage
- Set system modes (home, away, sleep)
- See real-time flow, pressure, and temperature readings
- Run manual leak detection tests “Health Tests”
Works with Amazon Alexa, Google Assistant and Control4

FLOW
· Maximum operating pressure of 175 psi

STANDARDS

Smart Home Water Security System third party certified by: IAPMO IGC-349-2017 and all applicable requirements referenced therein
UL 1951, CSA C22.2 Nos. 14 and 68
Certified to NSF 61/9 & 372
Third party certified to meet FCC part 15 Class B (power adapter)
Third party certified to meet Industry Canada RSS-210
UL 60950, UL 1310, CSA C22.2 #223, CE EN 60950
UL 1951, CSA C22.2 No. 68, CSA C22 No.14
FCC ID: PU5900-001 to CFR 47 Part 15 Subpart C (Flo by Moen device)
IPX5 (protection from sprayed jets in any direction)

WARRANTY

Flo Technologies warrants that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of delivery following the original retail purchase
Extended product warranty available through FloProtect plan Visit www.support.meetflo.com for complete details and limitations

Installation Notes:

Install product following the installation guide
Must be installed on accessible main water supply line (cold water line) that is 1 inch diameter (can be installed on 1.25 inch diameter or smaller)
Must be installed after water meter, water shut-off, and pressure regulating valve (if applicable)
Power supply and device must not be installed where the ambient temperature can exceed 140 deg F (60 deg C) or below 32 deg F (0 deg C)
Requires electrical outlet (100-240VAC-50/60 Hz) with continuous power within 10 feet of device
Requires WiFI network (WLAN connectivity/IEEE 802.11bgn, 2.4 GHz range)
Smartphone (iPhone or Android) with installed app required

For Well Pump System Installations:
When installed on well or irrigation water service lines, the device should be placed after (downstream) of all treatment and filtration components to avoid debris interference. It should also be installed after the well pump and water storage tank. If it is necessary to install the device prior to a water filtration system, a wye strainer with a 100 mesh or finer screen and blow- down port is required to catch any sediment or particles from the ground source or casing. The mesh screen in the strainer may require periodic maintenance.

Parts

Spec

Specifications

Dimensions

DESCRIPTION

Lithium Ion Battery Backup for all Flo by Moen Smart Valves
Used in the event of a main power disruption
When AC power is available, the battery backup passes 12 VDC to your Flo by Moen Smart Valve and maintains battery charge level. If there is an AC line disruption, your Flo by Moen Smart Valve will immediately be powered by the battery backup.
Powers your Flo by Moen device for 3+ days
Extends your Flo by Moen power cord by 6′
Weatherproof (IPX5 Rated, Housing Material – UL 746C f1)
Outdoor rated (UL 1951)
For use only with Flo by Moen Outdoor Rated Power Adapter
2.1mm x 5.5mm DC power female (input) x 2.1mm x 5.5mm DC Power Male (output)
Battery capacity rating 13,000 mAh at 10.4 VDC/140Wh
Primary charging voltage: 12 VDC
Rated power throughout: 3A
Note: Flo by Moen device is sold separately

Product 2

OPERATION Status LED:

Green = Full charge
Solid Red = Charging
Blinking Red = Error (Contact Tech Support)

STANDARDS

Third-party certified by IAPMO EGS to UL 1951, CSA 22.2 No. 68, CSA C22.2 No. 14, and all applicable requirements referenced therein.
Dangerous Goods Classification : UN3480
UN38.3 Compliant
IEC 60529 IPX5 (protection from sprayed jets in any direction)

WARRANTY

Flo Technologies warrants that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of delivery following the original retail purchase.
Visit www.support.meetflo.com for complete details and limitations

Installation Notes:

To install, simply plug the Flo by Moen device into the battery backup and plug the battery backup into the wall. No pairing or additional setup is needed.
Operating temperature: battery backup must not be installed where the ambient temperature can exceed 140°F (60°C) or below 32°F (0°C)
If installed outdoors the electrical outlet MUST be in a weatherproof enclosure positioned at least 12 inches above the ground.

Please note that applicable laws and regulations require that these materials be shipped via ground transportation rather than air.

Without the battery backup