nedis SPBT1003BK Bluetooth Speaker User Guide
- June 7, 2024
- nedis
Table of Contents
nedis SPBT1003BK Bluetooth Speaker User Guide
Quick start guide
Bluetooth® Speaker
SPBT1003BK
For more information see the extended manual online:
ned.is/spbt1003bk
Intended use
The Nedis SPBT1003BK is a Bluetooth speaker which plays audio from your media
device. The product is exclusively intended for playing music from a Bluetooth
device. The product is not intended for professional use. Any modification of
the product may have consequences for safety, warranty and proper functioning.
Specifications
Main parts
(image A)
- (1) Light
- (2) AUX port
- (3) Status indicator LED
- (4) Micro USB port
- (5) Light button
- (6) Power switch
- (7) Micro USB cable
- (8) AUX cable
Safety instructions
WARNING
To prevent possible hearing damage, do not listen at high volume levels for long periods.
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Charge the battery for at least 2 hours when you use it for the first time.
- Only use the provided USB charging cable.
- Do not overcharge the battery.
- Do not immerse the product in water.
- This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not leave the battery on prolonged charge when not in use.
- After extended periods of storage, it may be necessary to charge and discharged the cells or batteries several times to obtain maximum performance.
- During charging the product must be placed in a well-ventilated area.
- Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
- Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Charging the product
- Plug the micro USB cable A(7) into the micro USB port A(4).
- Plug the other end of A(7) into a computer or power adapter.
- Plug the power adapter into a power outlet. The charging indicator LED A(3) burns red to indicate the product is charging.
A(3) switches off when the battery is fully charged.
Switching on the product
Use A(6) to switch the product on or off.
Pairing the product to Bluetooth audio source
After switching on the product, A(3) blinks blue and
the product emits a tone to indicate pairing mode is active.
The product reconnects to any nearby, previously paired devices that are
switched on.
1. Enable Bluetooth on the device you want to pair the speakers with.
2. Select “SPBT1003BK” from the list of available
Bluetooth devices on your device. When paired successful, A(3) blinks blue
slowly and the product emits a tone.
Wired connection
1. Plug the AUX cable A(8) into the AUX port A(2).
2. Plug the other end of the AUX cable into an AUX output of your audio
source.
Controlling the music
Use your audio source to control the audio volume and playback.
Light modes
• Press light button A(5) to cycle through the different light modes.
Overview of the light modes
- RGB cycling colours
- Solid red
- Pulsing red
- Solid green
- Pulsing green
- Solid blue
- Pulsing blue
- Random RGB colours
- No lights
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product SPBT1003BK from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via: nedis.com/SPBT1003BK#support
For additional information regarding the compliance, contact the customer
service: Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28 5215 MC ‘s-Hertogenbosch, the Netherlands
References
- Smart solutions for your daily needs | Nedis
- Bluetooth® Speaker | Battery play time: up to 13 Hours | Table Design | 5 W | Mono | Built-in microphone | Black
- Bluetooth®-Nackenlautsprecher | Batteriespielzeit: bis zu 13 Stunden | Tisch Design | 5 W | Mono | Eingebautes Mikro | Schwarz
- Altavoz Bluetooth® | Tiempo de reproducción de la batería: Hasta 13 horas | Diseño de mesa | 5 W | Mono | Micrófono incorporado | Negro
- Bluetooth® Kaiutin | Akun toistoaika: Jopa 13 tuntia | Pöytämalli | 5 W | Mono | Sisäänrakennettu mikrofoni | Musta
- Haut -parleur Bluetooth® | Temps de lecture de la batterie: Jusqu'à 13 heures | Conception de table | 5 W | Mono | Microphone intégré | Noir
- Altoparlante Bluetooth® | Tempo di riproduzione della batteria: Fino a 13 ore | Tavolo Design | 5 W | Mono | Microfono incorporato | Nero
- Bluetooth®-Speaker | Batterij speelduur: Tot 13 Uur | Tafelmodel | 5 W | Mono | Ingebouwde microfoon | Zwart
- Bluetooth® Speaker | Battery play time: up to 13 Hours | Table Design | 5 W | Mono | Built-in microphone | Black
- Altavoz Bluetooth® | Tiempo de reproducción de la batería: Hasta 13 horas | Diseño de mesa | 5 W | Mono | Micrófono incorporado | Negro
- Bluetooth® Speaker | Battery play time: up to 13 Hours | Table Design | 5 W | Mono | Built-in microphone | Black
- Bluetooth® Reproduktor | Doba přehrávání na baterie: Až 13 hodin | Stolní provedení | 5 W | Mono | Vestavěný mikrofon | Černá
- Nedis | Your wholesaler of consumer electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>