ICY BOX IB-2914MSCL-C31 Docking and Cloning Station User Manual

ICY BOX IB-2914MSCL-C31 Docking and Cloning Station User Manual

Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:

Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.

DANGER
Warns of a directly hazardous situation causing death or serious injury.

WARNING
Warns of a potentially hazardous situation that may cause death or serious injury.

CAUTION
Warns of a potentially hazardous situation that may cause minor injury.

IMPORTANT
Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.

Package content

1x IB-2914MSCL-C31, 1x Power adapter, 1x USB combo cable, 2x M.2 rubber fixation, 1x Manual

View

1. 2.5″/3.5″ SATA slot

2. M.2 PCIe NVMe slot

3. Status LED (power/access/clone process)
   

4. Power adapter jack

5. Power ON/OFF switch

6. Clone direction switch

7. Clone button (activate/start)

8. USB Type-C® to host computer
   

Requirements

• One free USB 3.2 Gen 2 Type-C® or Type-A port
• One M.2 PCIe NVMe SSD 22x 42/60/80
• One 2.5″/3.5″ SATA SSD/HDD

Installation

Install the drives

1. Insert the M.2 with an angle of approx. 30 degrees into the M.2 slot (2). Flip the M.2 rubber fixation back while inserting.
   

2. Push down the M.2 and let the M.2 rubber fixation flip back into position.
   

3. Install the 2.5″ or 3.5″ SATA HDD/SSD to the SATA slot (1).

Installation and using clone mode

1. Plug in the Power adapter to the power adapter jack (4).
   Hint: Please do not insert the USB cable while using the clone mode.
   

2. Plug in the power adapter to a household power socket
   

Important Information before you start the cloning process:

• The target drive (Target) must be of the same capacity or bigger than the source drive (Source).

• If the target drive is smaller than the source drive, it is not possible to start the clone mode by pressing the button.
  In this case the 25% + 50% LED and the 75% + 100% LED start to flash alternately
  

• Cloning creates an identical copy of your drive.

• Since the cloning process copies every single byte of the source drive, the process may take several hours depending on the drive capacity and technology.

• After the cloning process is complete, the computer may not be able to identify both drives because they are assigned the same drive letter. To separate the drives, at least one of the SSDs must be given a different drive letter or marked as “online”. (Under Windows® in “disk manager”).

• If only one drive is plugged into Source, there will be no action when you press the clone button (7).

• If the target drive (Target) is bigger than the source drive (Source), you may create a new volume with the remaining space on the target drive after cloning

DO NOT connect the computer when the device is in clone mode.

On/Off Instructions

1. Switch on the device with the ON/OFF switch (5).
   

2. Select your preferred clone direction with the clone direction switch (6).
   

3. As soon as the status LEDs TARGET and SOURCE light up continuously, press and hold the „clone“ button (7) for ca. 5 sec. to activate the clone mode.
   

4. As soon as all LEDs light up permanently, press the „clone“ button again to start the cloning process.
   

5. Once the 25% LED and the LEDs (2) of the source SSD and target SSD start flashing, the cloning process has starte
   

ATTENTION: DO NOT stop or turn off the device until the clone process is finished completely!

• If all status LEDs (3) for the cloning process flash at the same time, an error occurred as the target drive is smaller or one of the drives is damaged. Please turn off the device and change to a suitable or functional drive.
• When the cloning process is successfully completed, all LEDs (3) light up continuously.
• Switch off the clone station with the ON/OFF switch (5)

HINT: To uninstall the drives please make sure that the device is turned off.

Installation and use of the docking mode

1. Plug the USB cable into the Type-C® port of IB-2914MSCL-C31 (8).
   Plug the Power adapter into the power adapter jack (4).
   

2. Plug the power adapter into a household power socket
   

3. Plug the Type-C® or Type-A plug of the USB combo cable into your host computer.
   

4. Turn ON the IB-2914MSCL-C31 with the ON/OFF switch (5).
   

Risk of electrical shock

Contact with parts conducting electricity
Risk of death by electrical shock

WARNING

•  Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs

Hazards during assembly (if intended)

Sharp components
Potential injuries to fingers or hands during assembly (if intended)

CAUTION

• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only

Hazards caused by a development of heat

Insufficient device/power unit ventilation
Overheating and failure of the device/power unit

IMPORTANT

• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit

Hazards caused by very small parts and packaging

Risk of suffocation
Risk of death by suffocation or swallowing

WARNING

• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children

Potential data loss

Data lost during commissioning
Potentially irreversible data loss

IMPORTANT

• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product

Cleaning the device

Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the device

IMPORTANT

• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth

Disposing of the device

Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted

IMPORTANT

This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please   return it to the retailer or your local waste disposal and recycling point.

If you have any questions, please do not hesitate to contact our support at support@raidsonic.de or visit our website at www.icybox.de.

© Copyright 2023 by RaidSonic Technology GmbH. All Rights Reserved.
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual.
RaidSonic Technology GmbH reserves the right to make changes in the specifications and/ or design of the above-mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have.
DisplayLink® is the registered trademark of DisplayLink Corp. in the EU, the US, and other countries DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries. The terms HDMI® and HDMI® High-Definition Multimedia Interface, and the HDMI® logo are trademarks or registered trademarks of HDMI® LA, Inc. in the United States and other countries.
Apple and macOS are registered trademarks of Apple Computer Inc. Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation.

References

• ICY BOX
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>