JBL JR460NC Over Ear Wireless Headphone User Guide
- June 6, 2024
- JBL
Table of Contents
JBL JR460NC Over Ear Wireless Headphone User Guide
WHAT’S THE IN BOX?
Power & on connect
To enter pairing mode again, power off and then hold for 5 seconds.
Multi-point Connection
BUTTON COMMAND
- Press x1
- Press x2
- Press x3
- Hold (2s)
WIRED LISTING MODE
CHARGING
FACTORY RESET
LED BEHAVIORS
TECHNICAL SPECIFICATIONS
- Model: JR460NC
- Driver Size: 32 mm / 1.26″ Dynamic Driver
- Power supply: 5.0 V— 1.0 A
- Weight: 200 g / 0.44 lbs
- Battery type: Lithium-ion Polymer (450 mA / 3.7 V)
- Charging time: <2 hrs from empty
- Music playtime with BT on and ANC off: up to 30 hrs
- Music playtime with BT on and ANC on: up to 20 hrs
- Frequency Response: 20 Hz — 20 kHz
- Impedance: 32 ohm
- Sensitivity: 92 dB SPL @1 kHz
- Maximum SPL: 81 dB
- Microphone sensitivity: -27 dBV@1 kHz / Pa
- Bluetooth version: 5.0
- Bluetooth profile version: HFP 1.6 AVRCP 1.5 A2DP 1.3
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: <10 dBm
- Bluetooth transmitter modulation: GFSK, n/4 DQPSK, 8DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBUR460NC) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.006 W/Kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of Omm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna. 6132A-JBLJR460NC
FCC ID: APIJBLJR460NC
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth 5IG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>