MICHELIN MEMS Evolution 4 RF Module User Manual
- June 12, 2024
- MICHELIN
Table of Contents
MICHELIN® MENMS® EVOLUTION 4
IMPROVING YOUR EFFICIENCY
EASIER THAN EVER BEFORE.
STRENGTHEN SAFETY
REDUCED MAINTENANCE COSTS
REDUCED TIRE BUDGET
SECURED PRODUCTION
PRODUCT NOTICE
PRODUCT NAME
MEMS RF 433MHz MODULE – Part Number CAI 499802
PRODUCT DESCRIPTION
The MEMS EVOLUTION 4 RF MODULE is mounted in a MEMS EVOLUTION 4 TRANSCEIVER and receives, via externally mounted antennas, pressure and temperature data transmitted by the MEMS SENSORS. This information is forwarded to the MEMS EVOLUTION 4 SERVER, together with any messages that may require corrective action to be taken in order to maximise the service life of the tire. 2 metal SMA to TNC adapters, to connect antenna cables, are included.
FCC / IC CERTIFICATION
| Model | : RV7-01 |
|---|---|
| HVIN | : RV7-01 |
| PMN | : RV7-01 |
| FCC ID | : FI5-RV701 |
| IC | : 5056A-RV701 |
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference and 2) this device must
accept any interference received, including interference that may cause
undesired operation.
“Federal Communications Commission (FCC) Statement 15.105(a)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.” “15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.”
“FCC RF Radiation Exposure Statement:
1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
“Caution: Exposure to Radio Frequency Radiation
1. To comply with the Canadian RF exposure compliance requirements, this
device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.”
PRODUCT SPECIFICATION
RF Performance
- RX frequency: 433.92MHz ISM band
- Receiver sensitivity: -100dBm or better
- Antenna: 2 external dipole through a TNC-F connector
Electrical Performance
- Powered by a MEMS EVOLUTION 4 TRANSCEIVER.
Operating Conditions
- Operating temperature: -20°C to +60°C, -4°F to +140°F Storage Conditions
- Storage temperature: -40 to +70°C, -40°F to +158°F
Physical Characteristics
- Dimensions: L=180mm. W= 65mm. D=20mm (including connectors)
- Weight: approximately 500g
- Aluminium case, anodized
Environment
- RoHS compliant
DISPOSAL
The MEMS EVOLUTION 4 RF MODULE must not be disposed of in landfill.
At the end of its life the MEMS EVOLUTION 4 RF MODULE must be removed from the
vehicle and deposited in a container dedicated to the recycling of electronic.
If users do not have access to the appropriate recycling facility, your local
Michelin MEMS representative is able to provide a container dedicated to the
purpose of collecting MEMS equipment.
CONTACT DETAILS – Technical Support
For more information or assistance, please contact the Michelin MEMS representative for your country.
| Brasil, Chile & Perú | : +55 (21) 36 21 4646 |
|---|---|
| USA, Canada & México | : +1 864 458 5000 |
| Australia | : +61 3 86 71 1003 |
| South Africa | : +27 115 790 300 |
| Russia | : +7 495 258 09 26 |
| China | : +86 21 22855000 |
MFP MICHELIN
23 Place des Carmes-Déchaux 63000 Clermont-Ferrand France
PRODUCT INFORMATION
For correct operation, the coupling torque of all SMA connectors is 0.34 – 0.57Nm. Failure to tighten to this range can result in loss of performance and/or damage to the connector during use.
Features, specifications are subject to change withoDocument version 7.0 MFP
MICHELIN © 2021 All rights reserved.
Exclusive property of Manufacture Française des Pneumatiques
Michelin. Any reproduction or utilization prohibited without the consent of
Michelin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>