SolidRun SRG0400-WBT WiFi Integration Module Instructions

: June 13, 2024
: SolidRun

Table of Contents

Device Classifications
FCC Definitions
Simultaneous Transmission Evaluation
OEM Instruction Manual Content
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wi-Fi Module Integration Instructions
Model: SRG0400-WBT

This module has been granted limited modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / ISED (Canada) certification if they meet the following conditions. Otherwise, additional FCC / ISED approvals must be obtained.

The host product with the module installed must be evaluated for simultaneous transmission requirements.
The user’s manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / ISED RF exposure guidelines.
To comply with FCC / ISED regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed 3 dBi ±1 dB at 2.4 GHz and 4 dBi ±1 dB at 5 GHz with Pulse Larsen Antenna P/N: W3918XXXX.
This limited modular transmitter is only approved for use by the grantee in its own products and not intended for sale to third parties and the user manual integration instructions are internal manufacturing documents.
A label must be affixed to the outside of the host product with the following statements:

Contains FCC ID: 2BA24LBEE5HY1MW
IC: 12107A-LBEE5HY1MW

The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
If the final host / module combination is intended for use as a portable device (see classifications below) the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part 2.1093 and ISED RSS-102.

Device Classifications

Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays and costs due to unplanned testing activities.
The module integrator must determine the minimum distance required between their host device and the user’s body. The FCC provides device classification definitions to assist in making the correct determination.
Note that these classifications are guidelines only; strict adherence to a device classification may not satisfy the regulatory requirement as near- body device design details may vary widely. Your preferred test lab will be able to assist in determining the appropriate device category for your host product and if a KDB or PBA must be submitted to the FCC.
Note, the module you are using has been granted modular approval for mobile applications. Portable applications may require further RF exposure (SAR) evaluations. It is also likely that the host / module combination will need to undergo testing for FCC Part 15 regardless of the device classification. Your preferred test lab will be able to assist in determining the exact tests which are required on the host / module combination.

FCC Definitions

Mobile: (§2.1091) (b) — A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example, modular or desktop transmitters), the potential conditions of use of a device may not allow easy classification of that device as either Mobile or Portable. In these cases, applicants are responsible for determining minimum distances for compliance for the intended use and installation of the device based on evaluation of either specific absorption rate (SAR), field strength, or power density, whichever is most appropriate.

Simultaneous Transmission Evaluation

This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01, D03 (for laptop, notebook, netbook, and tablet applications).
These requirements include, but are not limited to:

Transmitters and modules certified for mobile or portable exposure conditions can be incorporated in mobile host devices without further testing or certification when:
The closest separation among all simultaneous transmitting antennas is >20 cm, Or
Antenna separation distance and MPE compliance requirements for ALL simultaneous transmitting antennas have been specified in the application filing of at least one of the certified transmitters within the host device. In addition, when transmitters certified for portable use are incorporated in a mobile host device, the antenna(s) must be >5 cm from all other simultaneous transmitting antennas.
All antennas in the final product must be at least 20 cm from users and nearby persons.

OEM Instruction Manual Content

Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product:
This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is only authorized for use in a mobile application. At least 20 cm of separation distance between the module and the user’s body must be maintained at all times.
Operating Requirements and Conditions:
The design of SolidSense Compact complies with U.S. Federal Communications Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.
FCC ID:
This product contains FCC ID: 2BA24LBEE5HY1MW
Note: In the case where the Host / Module combination has been re- certified the FCCID shall appear in the product manual as follows:
FCC ID: 2BA24LBEE5HY1MW
Mobile Device RF Exposure Statement (If Applicable):
RF Exposure – This device is only authorized for use in a mobile application. At least 20 cm of separation distance between the SolidSense Compact device and the user’s body must be maintained at all times.
Portable Device RF Exposure Statement:
RF Exposure – This device has been tested for compliance with FCC RF exposure limits in a portable configuration. At least 20 cm of separation distance between the SolidSense Compact device and the user’s body must be maintained at all times. This device must not be used with any other antenna or transmitter that has not been approved to operate in conjunction with this device.
Caution Statement for Modifications:
CAUTION: Any changes or modifications not expressly approved by SolidRun Ltd could void the user’s authority to operate the equipment.
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End Product):
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.