GREEN CUT GGT1200C Petrol Brushcutter Instruction Manual

: June 3, 2024
: GREENCUT

GREEN CUT GGT1200C Petrol Brushcutter

INTRODUCTION

Thank you for choosing this GREEN CUT product. We are confident that you will appreciate its quality and meet your needs for a long period of time.
Remember that you can contact our Official Technical Service for questions about assembly, use, maintenance, identification, and troubleshooting and for the purchase of spare parts and/or accessories.

ATTENTION
Please read this manual carefully before using the product. Failure to comply with the operating instructions and safety warnings may result in damage to the user and/or the product itself. The manufacturer is not responsible for accidents and damage to the user, third parties, and objects resulting from ignoring the contents of this manual. This product is not intended for professional use. Keep this instruction manual for future reference. If you sell this product, remember to give this manual to the new owner.

SAFETY RULES AND PRECAUTIONS

The following symbols and signal words and their meanings are intended to explain the hazards and information related to this product.It indicates a dangerous situation where you need to pay full attention to avoid any kind of personal injury or damage to the device.It indicates useful information which can facilitate your task.

ATTENTION
Read and understand all warnings and safety instructions before using this product. Failure to do so may result in electric shock, fire, and/or serious injury. All information in this manual is relevant to your own safety and that of your environment. If you have any questions about the information contained in this manual, consult a professional or contact the Official Technical Service. The following information on hazards and precautions includes the most likely situations that may arise during use of this machine. Consult all product documentation, packaging, and labels before use. If you encounter a situation not described in this manual, use common sense to use the machine as safe as possible and if you see danger, do not use the machine.

USERS

This product has been designed to be handled by users of legal age who have read and understood these instructions. Do not allow underage persons or persons who do not understand these instructions to use the product.
Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety devices, and how they should be used.
If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the company of an experienced person.

PERSONAL SAFETY

Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions, taking into account the conditions and the work to be done. Using this machine for unintended purposes may cause a dangerous situation.
Wear ear protection and safety glasses at all times when operating the machine.
Be alert, watch what you are doing when operating this machine.
Avoid unintentional starting of the machine. Make sure the switches are in the off position before connecting the machine to a power source.
Always maintain proper foot support and operate the machine only when it is on a fixed, stable, and level surface. Slippery or unstable surfaces can cause a loss of balance or control of the machine.
Do not use this machine when you are tired or under the influence of drugs, alcohol or medicines.
Check the power cable and extension cord for signs of damage or aging. If the cable is damaged during use, disconnect it from the supply immediately.
Do not put your hands or feet under the machine. Keep all parts of the body away from the blade when the machine is in operation. Before starting the scarifier, make sure that the blade is not in contact with any object.
It is not recommended to use this machine on slopes with more than 5% difference in level. Cutting on mounds can be dangerous. Be careful when walking on slopes or wet grass. Be especially careful when changing direction on a slope. Cut parallel to the surface of the slope, never up and down.
Do not try to remove the cut material from the cutting tool when it is moving. Be sure the machine is turned off when cleaning up material residue.
Never hold the machine by the cutting tool. The cutting tools have sharp edges that can hurt you.
Hold the machine with your two hands on the handlebars and always place your body behind it.
Do not operate the machine in the rain or in extremely damp conditions.
Do not leave this machine running unattended.

WORK CLOTHES

Dress appropriately. Do not wear loose clothing or jewelry that may get caught in moving parts. We recommend the use of:
Eye protection (safety glasses).
Hearing protection.
Head and face protection (helmet and mask).
Hand protection (resistant and non-slip gloves).
Leg protection (trousers).
Foot protection (non-slip footwear).

VIBRATIONS

A high level of vibration and long periods of exposure are the factors contributing to white finger disease (Raynaud’s phenomenon). In order to reduce the risk of white finger disease, you need to be aware of these recommendations:
Always wear gloves.
Worry about always keeping your hands warm.
Make sure that the chain is always sharp.
Take frequent breaks.
Always hold the machine firmly by the handles.
If you notice any of the symptoms of white finger disease, see your doctor immediately.

WORK AREA SAFETY

Do not use the machine at extreme temperatures.
Keep the machine away from excessive moisture.
Do not use this machine in an explosive atmosphere in the presence of flammable liquids, gases and dust.
Do not operate the machine on a paved or gravel surface where the ejected material may cause injury.
Remove all objects from the work area before starting this machine. Objects near the product may be touched and thrown by the machine causing personal injury.
Keep the work area clean and well-lit. Cluttered and dark areas can cause accidents.
Keep children, people or animals away while operating this machine.
When work is performed simultaneously by two or more people, always check the location of the others and keep a sufficient distance to ensure safety.
Remember that the operator of the machine is responsible for dangers and accidents caused to other people or things. The manufacturer is in no way responsible for damage caused by improper or incorrect use of this machine.

ELECTRICAL SAFETY

This equipment can be a potential source of electrical shock if misused.
Make sure that all power supplies meet the equipment voltage requirements before connecting or disconnecting the equipment.
Keep the machine away from water and excessive moisture.
Do not use electrical cables to lift, move or transport the equipment. Protect cables from heat and sharp objects.
Ensure that the electrical cables do not present a tripping hazard.
When using the power tool outdoors, use an extension cord suitable for outdoor use.

MAINTENANCE, TRANSPORTATION, AND STORAGE SAFETY

Do not modify the product controls.
Check regularly for broken parts or other conditions that may affect the proper operation of the machine.
Replace worn or damaged parts immediately with original spare parts only.
Carry out regular maintenance of the machine. Do not attempt any maintenance or repair work that is not described in this instruction manual. We recommend that maintenance and repairs not described in this manual be carried out by the Official Technical Service.
Always clean dust and dirt from the machine when the work is finished.
Do not clean the machine with solvents, flammable liquids or hard abrasives.
Keep the handles of this machine dry and clean.
Keep cutting tools sharp and clean. Proper maintenance of cutting tools reduces the likelihood of incidents by making them easier to control.
If the machine starts to vibrate in a strange way, turn it off and examine it to find the cause. If you do not detect the reason take your machine to the official Technical Service.
To avoid burns or fire hazards, allow the machine to cool completely before transporting or storing it.
When transporting the product, make sure that the motor is stopped and the machine is properly secured to prevent it from tipping over or being damaged.
The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or in damp or wet locations.
Store the product out of the reach of children.

SERVICE

Have the product checked periodically by a qualified technician and use only original spare parts. If you have any questions, please contact the Official Technical Service.

WARNING ICONS

The icons on the warning labels on this machine and/or in the manual indicate information necessary for the safe use of this machine.

PRODUCT DESCRIPTION

CONDITIONS OF USE
Use the brushcutter only for cutting and clearing grass and small shrubs. Any other use than that described above can lead to dangerous situations and exempts the manufacturer from any liability.

DETAILED DESCRIPTION OF THE PRODUCT

Semi-automatic reel
Head protector
Bottom bar
Shaft connection knob
Top bar
Handle of subjection
Security lock button
On/off switch

NOTE
The products detailed in this manual may vary in appearance, inclusions, description, and packaging as shown or described here.

TECHNICAL DATA

NOTE
GREEN CUT reserves the right to modify the technical characteristics without prior notice.

BOX CONTENTS

Brushcutter (1pc)
Mounting kit (1pc)
Instruction manual (1pc)
- Remove the product and accessories from the box. Make sure all items are present.
- Inspect the product to ensure that it has not been broken or damaged in transit.
- Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.

ATTENTION
If any part is missing or damaged, contact the Official Technical Service. Do not use this product without having replaced the missing or damaged part. Using this product with damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

ATTENTION
Do not connect the machine to the power supply until assembly is complete. Failure to comply could result in serious injury.

ASSEMBLY OF THE BARS

Loosen the axle connecting knob (8) and remove the upper and lower bar protectors (a, b).
Connect the top bar (9) and bottom bar (5) through the shaft connector in the correct direction until it locks.
Tighten the axle connector knob.

HANDLE ASSEMBLY

Connect the (7) handle to the top bar (5) with the two screws, washers, and nuts and fix them with an Allen key (15).

MOUNTING OF THE HEAD PROTECTION

Mount the protector with 3 screws and the Allen key (16).
Remove the pin (b), nut (a), upper bracket (c) and lower bracket (d).
Fix the protector (10) to the clamping shaft (9) with the 3 screws supplied and the Allen key (17).

INSTALLATION OF THE SEMI-AUTOMATIC REEL

Remove the pin (a) and insert the Allen key (15) into the opening on the rear side of the cutting blade to prevent the output shaft (e) from turning.
Loosen the nut (b) with the socket spanner (17) by turning it clockwise and then remove the upper bracket
(c) and the blade from the lower bracket (d) (if applicable).
Screw the semi-automatic reel (11) onto the output shaft (e) by turning it counterclockwise.
Remove the Allen key (15).

SEMI-AUTOMATIC REEL LOADING

Disconnect the brushcutter.
Turn the machine upside down with the guard up.
Loosen the regulator (a) by turning it clockwise (viewed from above) and remove it.
Remove the empty reel (b) and clean the inside of the reel holder by carefully removing all dust and grass residues.
Insert the new bobbin at the base of the bobbin and push the end of the thread (d) through the side holes (c).
Place the regulator (a) and secure it by turning it counter-clockwise (viewed from above).
Fix the thread length again by pushing the trimmer head adjuster and pulling the ends of the thread to the desired length.

PRODUCT USE

ATTENTION
To avoid injury from accidental starts, always turn off the machine and disconnect it from the power supply before moving it or making adjustments.

BEFORE USING

ATTENTION
Be sure to use an extension cable suitable for outdoor use (H05VV-F 2X0.75mm2) attached to the power supply through a leakage protection system (RCD).

Place the safety harness on your left shoulder.
Connect the machine to the extension cable and then to the power supply.

USE OF THE METAL BLADE

Always cut from right to left.
A metal blade cuts better if it is kept at a distance of 1/3 of the edge. Use this area to cut bushes and weeds. For cutting fresh grass, you can approach up to 2/3 of the blade tip.
Always allow the nylon line/cutting blade to turn at maximum speed; do not work in such a way as to overload the mower/brushcutter.

USE OF THE SEMI-AUTOMATIC REEL

Nylon yarn uses more power. Please note that the rotation speed of the motor in operation will be 50% higher than when using a metal blade.
The nylon cutter cuts the grass with the same power of rotation of the cord. If you try to cut the grass by the length of the cord in one go, the rotation speed will decrease due to the resistance and you will not be able to make a good cut. If there is more resistance, quickly move the nylon mower away from the grass, increase the rotation speed and cut small amounts of grass in one go.
To extend the reel string, run the engine at full speed and hit the reel regulator on the ground. This will automatically extend the nylon line.

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive maintenance for the machine to continue to function properly.

ATTENTION
Make sure the machine is completely turned off before performing any maintenance or repairs. This will eliminate any potential risk. The machine is set at the factory. Do not make unnecessary adjustments, adjust only when necessary due to normal wear.

CLEANING GUIDELINES

ATTENTION
Do not use solvents, chemicals or abrasives when cleaning the machine, as some surfaces may be damaged.

Use gloves or appropriate tools for cleaning. Do not do it with unprotected hands.
Clean the machine after each use to ensure the best performance and durability.
It is recommended that the machine be raised when checking or maintaining the lower part of the cover, avoiding tilting it so that fuel or oil does not spill.
Use a slightly damp cloth, water and mild detergent for cleaning.
Use a brush for the parts or pieces that are difficult to access.
Make sure that all ventilation slots designed for heat dispersion are clean and free from obstructions or residues.
Remove grass clippings, dirt, etc. from the underside of the cover and blades (the wash function on some models makes this task easier).
It is recommended to put a little oil on the blades after each use to avoid corrosion.
Make sure all hoppers and covers are clean and unobstructed.
Make sure all cables, levers, switches, etc. are clean and working as they should and without problems.

TROUBLESHOOTING

The table includes some of the most common problems, their causes, and remedies.

NOTE : If you are unable to resolve the problem, please contact the Official Technical Service.

TRANSPORTATION AND STORAGE

Allow the equipment to cool completely before transporting or storing it.
Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
The equipment is not weatherproof and should not be stored in direct sunlight, high temperatures or in damp locations.
Always store the machine with the cutting element protection installed.
Store the machine out of the reach of children.
Do not store the brushcutter on the floor. Hang it by the top handle in place, so that the guard does not touch anything. The rest of the guard on a surface could alter its shape and therefore its dimensions and safety features would be modified.

RECYCLING AND DISPOSING
Worn-out products are potentially recyclable and should not be disposed of in the regular trash. Help us to protect the environment and preserve natural resources. Please dispose of the device in an environmentally friendly manner. Do not dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this device to an approved recycling center (green dot).
Petrol, used oil, oil/petrol mixtures and objects soiled with petrol (e.g. rags) must not be disposed of in the normal refuse, down the drain, in the soil, in rivers, lakes or the sea. Oil-stained objects must be disposed of in accordance with local regulations: take them to a recycling center. The materials used in the machine’s packaging are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREEN CUT guarantees all GREEN CUT products for a period of 24 months (valid for Europe). The warranty is subject to the date of purchase taking into account the intended use of the product. As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its description as well as the defective tool. The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources, fan and transmission belts, impellers, air filters, spark plugs, and damage caused by improper use, especially non-compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREEN CUT spare parts, the warranty will be voided. In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free of charge. Other claims beyond this warranty are not valid.

DECLARATION OF CONFORMITY (EC)
We, PRAT INTERNATIONAL BRANDS S.L., owner of the GREEN CUT brand, with headquarters in Calle Blanquers (plot 7-8) Polígono Industrial Valls. 43800 – Valls, SPAIN, declare that the GGT1200C brushcutter, from the serial number of the year 2020 onwards, is in conformity with the requirements of the applicable European Parliament and Council Directives:

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC.

Safety Requirement
EN 60335-1:2012/A2:2019, EN 50636-2-91:2014, EN 62233:2008, EN 60745-1:2009/A11:2010, EN ISO11806-1:2011 The product delivered is the same as the one that underwent the EC type-examination. Albert Prat Asensio, CEO (Authorised representative and responsible for technical documentation).