GREENCUT GS620X Cordless Petrol Chainsaw Instruction Manual

GREENCUT GS620X Cordless Petrol Chainsaw

INTRODUCTION

Thank you for choosing this GREENCUT product. We are confident that you will appreciate its quality and meet your needs for a long period of time.
Remember that you can contact our Official Technical Service for questions about assembly, use, maintenance, identification and troubleshooting and for the purchase of spare parts and/or accessories.

ATTENTION: Please read this manual carefully before using the product. Failure to comply with the operating instructions and safety warnings may result in damage to the user and/or the product itself. The manufacturer is not responsible for accidents and damage to the user, third parties and objects resulting from ignoring the contents of this manual.

This product is not intended for professional use.

Keep this instruction manual for future reference. If you sell this product, remember to give this manual to the new owner.

SAFETY RULES AND PRECAUTIONS

The following symbols and signal words and their meanings are intended to explain the hazards and information related to this product. ATTENTION: Read and understand all warnings and safety instructions before using this product. Failure to do so may result in electric shock, fire and/or serious injury.

All information included in this manual is relevant to your own safety and that of your environment. If you have any questions about the information included in this manual, consult a professional or contact the Authorized Service Centre.

The following information on hazards and precautions includes the most probable situations that may arise during the use of this machine.

Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.

USERS

• This product has been designed to be handled by users of legal age who have read and understood these instructions. Do not allow underage persons or persons who do not understand these instructions to use the product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the company of an experienced person.

PERSONAL SECURITY

• Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions taking into account the conditions and work to be performed. Using this machine for other than its intended purpose may cause a hazardous situation.
• Be alert, watch what you are doing when operating this machine.
• Do not use this machine when you are tired or under the influence of drugs, alcohol, or medication.
• Avoid inhalation of exhaust gases. This machine produces dangerous gases such as carbon monoxide that can cause dizziness, fainting or death.
• Check that all safety features are installed and in good condition. Do not use this machine if any of its components are damaged.
• Always maintain proper foot support and operate the machine only when it is on a fixed, stable, level surface. Sliding or unstable surfaces can cause a loss of balance or control of the machine.
• Always hold the machine by the handles with both hands.
• When operating from heights, never work on a ladder, tree, or unsafe support and never operate with one hand.
• Keep all body parts away from cutting elements and moving parts when the machine is running. Before starting the machine, make sure that the cutting element is not in contact with any objects. A moment of carelessness during operation may cause your clothing or body part to be cut by the cutting element.
• Always hold the saw with your right hand on the rear handle and your left hand on the front handle. Holding the saw with your hands upside down increases the risk of an accident and should never be done.
• Check the condition of the tree to prevent dry branches from falling on it while you cut. When cutting a branch that is under tension, be alert to the risk of elastic return. When the tension of the wood fibres is released, the branch, under a spring effect, can hit the operator and/or project the saw out of control.
• Use extreme caution when cutting weeds and young shrubs. Fine materials can trap the saw chain and be projected onto you, or cause you to lose your balance under the effect of traction.
• If you are an inexperienced user we recommend that you do a minimal amount of practice cutting logs on a sawhorse or sawing fork.
• Do not attempt to remove the cut material from the cutting tool when it is moving. Make sure that the machine is switched off when cleaning up debris.
• Never pick up the machine by the cutting tool. Cutting tools have sharp edges that can hurt you.
• Do not touch any of the engine components while the machine is running or just after it has stopped due to the high temperatures it reaches.
• Do not operate the machine in rainy or extremely humid conditions.
• Do not leave this machine unattended during operation.

WORK CLOTHES

• Dress appropriately. Do not wear loose clothing or jewelry that may get caught in moving parts. We recommend the use of:
  • Eye protection (safety glasses).
  • Hearing protection.
  • Head and face protection (helmet and mask).
  • Hand protection (resistant and non-slip gloves).
  • Leg protection (trousers).
  • Foot protection (non-slip footwear).

VIBRATIONS

• A high level of vibration and long periods of exposure are the factors contributing to white finger disease (Raynaud’s phenomenon). In order to reduce the risk of white finger disease, you need to be aware of these recommendations:
  • Always wear gloves.
  • Worry about always keeping your hands warm.
  • Make sure that the chain is always sharp.
  • Take frequent breaks.
  • Always hold the machine firmly by the handles
• If you notice any of the symptoms of white finger disease, see your doctor immediately.

WORK AREA SAFETY

• Do not use the machine at extreme temperatures.
• Keep the machine away from excessive moisture.
• Do not use this machine in explosive atmospheres in the presence of flammable liquids, gases and dust.
• Never start the machine in a closed room or enclosure. Exhaust gases and fuel vapors contain carbon monoxide and hazardous chemicals.
• Keep the work area clean and well lit. Cluttered, dark areas can cause accidents.
• Remove all objects from the work area before starting this machine. Objects in the vicinity of the product may be touched and projected by the machine causing personal injury.
• Keep children, people or animals away while operating this machine.
• When the work is done simultaneously by two or more people, always check the location of the others and keep a sufficient distance to ensure safety.
• Remember that the machine operator is responsible for hazards and accidents caused to other people or things. The manufacturer is in no way liable for damage caused by improper or incorrect use of this machine.

FUEL SAFETY

• Fuel and oil are dangerous. Do not inhale or ingest. If you swallow fuel and/or oil, seek medical advice promptly. If it comes into contact with fuel or oil, clean with plenty of soap and water immediately. If irritated eyes or skin are present, consult a doctor as soon as possible.
• Do not refuel in enclosed or poorly ventilated areas. Fuel and oil vapors contain dangerous chemicals.
• Fuel and oil are dangerous and highly flammable chemicals. Do not bring flames, sparks or heat sources close to the machine. Do not smoke while transporting fuel, filling the tank or while working. In case of fire, extinguish the fire with a dry powder extinguisher.
• Always turn off the engine before refuelling.
• Always refuel in well-ventilated areas and never with the engine running, or hot.
• If a fuel leak is found, do not start or run the engine until the leak has been repaired.
• Make sure the fuel cap is properly closed.
• Fuel stored in the carburetor for long periods of time can cause a hard start and increase repairs and maintenance of the machine.
• Always store fuel in approved containers. Do not use stored fuel for more than 2 months, it will make starting more difficult and produce unsatisfactory engine performance.

MAINTENANCE, TRANSPORTATION AND STORAGE SAFETY

• Do not modify product controls.
• Check regularly for broken parts or other conditions that may affect the correct operation of the machine.
• Only replace worn or damaged parts immediately with original spare parts.
•  Carry out regular maintenance on the machine. Do not attempt any maintenance or repair work not described in this instruction manual. We recommend that maintenance and repairs not described in this manual be performed by an Official Service Facility.
• Follow the instructions for lubrication, tensioning and chain change accessories. An incorrectly tensioned and greased chain can break and increase the risk of recoil.
• Always clean the machine, especially the fuel tank, its surroundings and the air filter, of dust and dirt after finishing work.
• Turn off the machine and disconnect the spark plug before making any adjustments, filling up, changing accessories, servicing, transporting or storing this machine.
• Keep the handles of this machine dry and clean.
• If the machine starts to vibrate strangely, turn it off and examine it for the cause. If you do not see the reason, take your machine to the Official Technical Service.
• Reduce the engine speed when turning off the engine. If the engine is equipped with a fuel shut-off valve, use it when the engine has stopped.
• To avoid burns or fire hazards, allow the equipment to cool completely before transporting or storing.
• When transporting the product, ensure that the engine is stopped and that the machine is properly secured to prevent it from tipping over, spilling fuel or becoming damaged.
• When transporting the machine, hold the saw by the front handle with the machine off, the chain and sword covered with the cover and at a distance from the body parts. When storing the chainsaw, always cover the sword with the cover.
• The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or in damp or wet locations.
• Store the product out of the reach of children.

UNINVITED REACTIONS WHILE OPERATING WITH THE CHAINSAW

• Always be careful when cutting with the chainsaw and be aware of any unexpected reaction forces. There are three unforeseen reaction forces that occur on a chainsaw: rebound, forward pull and recoil.

REBOUND

• If an object is touched with the cutting chain in the area of the tip of the sword while it is running. Contact of the chain on the tip of the sword can cause an unforeseen reaction force that can push the tip of the sword upwards generating a rotating movement that can cause the chain’s sword to collide with the user. This reaction can result  in loss of control of the machine and severe personal injury.

PULL FORWARD

• When the chain stops abruptly when it is caught in the cutting area by a foreign body in the wood or because it is not cut properly. The chain, when stopped, pushes the saw forward and, if it is not correctly held against the branch or tree by the claw, it causes an unexpected pull that can cause loss of control and severe personal injury.
• To avoid this “pull forward”, start cutting at full throttle and always keep the machine at full throttle during cutting and support the saw’s claw against the wood to be cut.

REGRESSION

• Backdown can occur if the sword touches an object or when the wood is closed and the chain is stuck in the cut. The tip contact in some cases can cause an extremely fast reverse reaction, moving the sword upwards and towards the user. If the chain is locked in a position on the top edge of the sword, it can be pushed towards the user. In either case, the user may lose control of the machine and be seriously injured.
• Any of these reactions can cause you to lose control of the saw that could result in a serious personal injury.
• These reaction forces are the result of misuse of the tool and/or improper procedures or operating conditions and can be avoided by taking the appropriate precautions specified below:
  • Hold the saw firmly with both hands and with both thumbs and fingers around the saw handles and position your body and arms to allow it to withstand unexpected forces.
  • Do not extend your arms too far and do not cut above shoulder height.
  • Always be aware of where the tip of the chain sword is.
  • Make sure that the tip of the sword does not touch anything.
  • Do not cut branches with the tip of the sword.
  • Make sure there are no nails or pieces of metal in the cutting area and pay special attention to nails or pieces of iron that may be around the cutting area. Also be careful when cutting hardwood where the chain may become caught and blocked and therefore cause rebound.
  • Start at full throttle and always keep the machine at full throttle during cutting.
  • Cut a single branch or piece of wood at a time.
  • Use caution when inserting the saw chain into an already started cut to continue.
  • Do not cut with the chainsaw until you are familiar with the cutting technique.
  • Do not cut into branches or pieces of wood that may change position during cutting.
  • Keep the chain in good condition.
  • Work only if the chain is well sharpened and correctly tensioned.
  • Never stand on the cutting plane of the chainsaw.
  • Use only replacement swords and chains specified by the manufacturer. Incorrectly replaced swords and chains can cause a chain break and/or recoil.
  • Follow the manufacturer’s instructions for sharpening and maintaining the saw chain.

SERVICE

• Have the product checked regularly by a qualified technician and use only original replacement parts. If you have any questions, please contact the Official Technical Service.

WARNING ICONS

The icons on the warning labels on this machine and/or in the manual indicate information necessary for the safe use of this machine.

PRODUCT DESCRIPTION

CONDITIONS OF USE

Cut only wood. Do not use the chainsaw for any other purpose not intended. Do not use the chainsaw to cut plastic, bricks or building materials other than wood. Any use other than that described above may cause dangerous situations and exempts the manufacturer from any liability.

DETAILED DESCRIPTION OF THE PRODUCT

• 1. Assistance au démarrage à froid
• 2. Fermeture du filtre à air
• 3. Poignée
• 4. Frein à chaîne
• 5. Accélérateur
• 6. Moteur
• 7. Tendeur de chaîne
• 8. Epée
• 9. Chaîne
• 10. Silencieux
• 11. Bouchon de réservoir d’huile
• 12. Embrayage
• 13. Poignée de démarreur
• 14. Interrupteur d’allumage
• 15. Verrouillage de l’accélérateur
• 16. Bouchon de réservoir de carburant
• 17. Bloc silencieux

NOTE: The products detailed in this manual may vary in appearance, inclusions, description and packaging as shown or described here.

TECHNICAL DATA

NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.

BOX CONTENTS

1. Chainsaw
2. Chain
3. Sword
4. Protector of the sword
5. Wash allen
6. Screwdriver for carburetor adjustment
7. File
8. Spark plug wrench
9. Mixing pot
10. Hearing protector
11. Glasses
12. Gloves
13. M2 screws M5x10 (claw mount)
14. Gear lubrication pump (replacement)
15. Claw

• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.

ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use this product without having replaced the missing or damaged part. Using this product with damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

ATTENTION: The chainsaw may come with plastic spacers on or around the sword bolts, the spacer is for shipping purposes only and must be removed before mounting the sword. After removing the brake cover, remove the plastic spacers you find and then mount the sword as described. Failure to remove the spacers before mounting and using the chainsaw may result in injury, damage to the unit and void the warranty.

Open the box and install the guide bar and saw into the power unit as follows:

1. Pull the chain brake handle toward the back of the saw (or pull toward the back of the saw if the chain brake was installed on the saw).
2. Loosen the nuts and remove the unit from the chain brake cover assembly.
3. Install the claw (toothed part) on the unit (some models only).
4. Mount the chain on the sprocket and, while adjusting the chain around the guide bar, mount the bar in its housing. The cutting chains are directional, so make sure you have them installed correctly.
5. Adjust the position of the chain tensioner to fit into the chain pin slot.
6. Mount the chain brake cover on the unit. Tighten the side nuts with your fingers, do not tighten them. The sword must be able to move up and down with the fingers.
7. While holding the tip of the sword, adjust the chain tension by turning the tensioning screw on the tensioner until the holding straps touch the bottom of the sword rail. Some chain tensioning screws are located on the front of the unit.
8. You can now tighten the side nuts firmly with the tip of the sword in place.
9. With one gloved hand, check that the chain turns smoothly and is tight. Hold the chain along the top center of the chain saw blade as shown in the picture below and lift it up to check the tension. When released, the chain must quickly snap back into place.
10.  If the chain is too loose or too tight, loosen the nuts before adjusting the chain tensioner. Failure to loosen the nuts will damage the tensioner and void the warranty.

ATTENTION: A new chain will stretch when first used. Check the chain tension regularly with a gloved hand. A loose chain can derail and wear away, as well as wear away the sword. If the chain has to be tightened, always make sure the nuts are loosened before adjusting the chain tensioner.

ADJUST THE CHAIN USING THE CHAIN TENSIONER

ATTENTION

• Always wear safety gloves when touching the sharp side of the chain.
• Always disconnect the “spark plug wire” before touching the sharp end of the chain.
• You should check the tension of a new chain within 5 minutes of using it. For an old chain, check the tension every 15 minutes of use.
• Always loosen the side nuts before adjusting the chain tensioner.

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive maintenance for the machine to continue to function properly.

ATTENTION: Make sure the engine is completely shut down before performing any maintenance or repair. This will eliminate any potential risk.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>