TWOPAGES Cord Lift Roman Shade Installation Guide

: August 6, 2024
: TWOPAGES

Table of Contents

TWOPAGES Cord Lift Roman Shade
PARTS INCLUDE
NECESSARY TOOLS
MOUNTING YOUR SHADE: OUTSIDE MOUNT (A)
SHADE REMOVAL
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TWOPAGES Cord Lift Roman Shade

Cord Lift Roman Shade Installation

PARTS INCLUDE

Bracket Configuration

Width 45″ and above – 3 brackets
Width 58″ and above – 4 brackets
Width 67″ and above – 5 brackets

NECESSARY TOOLS

Metal Tape Measure
Pencil
Drill
Screwdriver

MOUNTING YOUR SHADE: OUTSIDE MOUNT (A)

Marking Holes

Determine the desired height and position of screws. mark them with a pencil. and drill the holes in the wall or window frame. Make sure the holes are level with each other.

Installing Brackets

Attach the brackets B with the screw sets C provided. then tighten the screws in place to install the brackets on the wall.
The extra brackets will be equipped and need to be installed for Roman shades wider than 45 inches.

Inserting

Insert the top front of the head rail into the front slot of the brackets. Then. secure the railing by pushing it into position.

Installing Cleat

Place the pull cord into the cord cleats. then locate the desired mounting place for the cleats and drill holes. Tighten the screw to secure the cleats.

MOUNTING YOUR SHADE: INSIDE MOUNT (B)

Marking Holes

Determine the desired position of screw holes. mark them with a pencil. and pre-drill the holes in the window frame. Make sure the holes are level with each other.

Installing Brackets

Attach the brackets B with the silver screw sets C provided. then tighten the screws in place to install the brackets on the window frame.
The extra brackets will be equipped and need to be installed for Roman shades wider than 45 inches.

Inserting

Insert the top front of the head rail into the front slot of the brackets. Then. secure the railing by pushing it into position.

Installing Cleats

Place the pull cord into the cord cleats. then locate the desired mounting place for the cleats and drill holes. Tighten the screw to secure the cleats.

SHADE REMOVAL

To remove the Roman shade panel. first, disassemble the scew of the cord cleat. then insert a flat-head screwdriver into the back slot between the shade header and brackets to release the insertion. Then carefully pull the shade panel downwards to detach it. Repeat this process for each bracket if there are multiple ones. ensuring you hold the shade securely to prevent it from falling.
MUST READ NOTE

After unboxing. follow the installation instructions for hanging the Roman shade. Please do not tamper with or untie the lifting mechanism connected by the white cord at the back of the shade. as this may cause damage and render the shade inoperable.

TWOPAGES https://twopagescurtains.com