GREENCUT GLM1200C Cortacesped Instruction Manual

GREENCUT GLM1200C Cortacesped

INTRODUCTION

Thank you for choosing this GREENCUT product. We are confident that you will appreciate its quality and meet your needs for a long period of time. Remember that you can contact our Official Technical Service for questions about assembly, use, maintenance, identification, and troubleshooting and for the purchase of spare parts and/or accessories.

ATTENTION:
Please read this manual carefully before using the product. Failure to comply with the operating instructions and safety warnings may result in damage to the user and/or the product itself. The manufacturer is not responsible for accidents and damage to the user, third parties and objects resulting from ignoring the contents of this manual.

This product is not intended for professional use. Keep this instruction manual for future reference. If you sell this product, remember to give this manual to the new owner.

SAFETY RULES AND PRECAUTIONS

The following symbols and signal words and their meanings are intended to explain the hazards and information related to this product.

attention to avoid any kind of personal injuries or damage to the device.
NOTE| It indicates useful information which can facilitate your task.

All information in this manual is relevant to your own safety and that of your environment. If you have any questions about the information contained in this manual, consult a professional or contact the Official Technical Service. The following information on hazards and precautions includes the most likely situations that may arise during use of this machine. Consult all product documentation, packaging and labels before use. If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible and if you see danger, do not use the machine.

USERS

• This product has been designed to be handled by users of legal age who have read and understood these instructions. Do not allow underage persons or persons who do not understand these instructions to use the product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the company of an experienced person.

PERSONAL SAFETY

• Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions, taking into account the conditions and the work to be done. Using this machine for unintended purposes may cause a dangerous situation.
• Wear ear protection and safety glasses at all times when operating the machine.
• Be alert, watch what you are doing when operating this machine.
• Avoid unintentional starting of the machine. Make sure the switches are in the off position before connecting the machine to a power source.
• Always maintain proper foot support and operate the machine only when it is on a fixed, stable and level surface. Slippery or unstable surfaces can cause a loss of balance or control of the machine.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medicines.
• Check the power cable and extension cord for signs of damage or ageing. If the cable is damaged during use, disconnect it from the supply immediately.
• Do not put your hands or feet under the machine. Keep all parts of the body away from the blade when the machine is in operation. Before starting the scarifier, make sure that the blade is not in contact with any object.
• It is not recommended to use this machine on slopes with more than 5% difference in level. Cutting on mounds can be dangerous. Be careful when walking on slopes or wet grass. Be especially careful when changing direction on a slope. Cut parallel to the surface of the slope, never up and down.
• Do not try to remove the cut material from the cutting tool when it is moving. Be sure the machine is turned off when cleaning up material residue.
• Never hold the machine by the cutting tool. The cutting tools have sharp edges that can hurt you.
• Hold the machine with your two hands on the handlebars and always place your body behind it.
• Do not operate the machine in the rain or in extremely damp conditions.
• Do not leave this machine running unattended.

WORK CLOTHES

• Dress appropriately. Do not wear loose clothing or jewelry that may get caught in moving parts. We recommend the use of:
  • Eye protection (safety glasses).
  • Hearing protection.
  • Head and face protection (helmet and mask).
  • Hand protection (resistant and non-slip gloves).
  • Leg protection (trousers).
  • Foot protection (non-slip footwear).

VIBRATIONS

• A high level of vibration and long periods of exposure are the factors contributing to white finger disease (Raynaud’s phenomenon). In order to reduce the risk of white finger disease, you need to be aware of these recommendations:
  • Always wear gloves.
  • Worry about always keeping your hands warm.
  • Make sure that the chain is always sharp.
  • Take frequent breaks.
  • Always hold the machine firmly by the handles.
• If you notice any of the symptoms of white finger disease, see your doctor immediately.

WORK AREA SAFETY

• Do not use the machine at extreme temperatures.
• Keep the machine away from excessive moisture.
• Do not use this machine in an explosive atmosphere in the presence of flammable liquids, gases and dust.
• Do not operate the machine on a paved or gravel surface where the ejected material may cause injury.
• Remove all objects from the work area before starting this machine. Objects near the product may be touched and thrown by the machine causing personal injury.
• Keep the work area clean and well lit. Cluttered and dark areas can cause accidents.
• Keep children, people or animals away while operating this machine.
• When work is performed simultaneously by two or more people, always check the location of the others and keep a sufficient distance to ensure safety.
• Remember that the operator of the machine is responsible for dangers and accidents caused to other people or things. The manufacturer is in no way responsible for damage caused by improper or incorrect use of this machine.

ELECTRICAL SAFETY

• This equipment can be a potential source of electrical shock if misused.
• Make sure that all power supplies meet the equipment voltage requirements before connecting or disconnecting the equipment.
• Keep the machine away from water and excessive moisture.
• Do not use electrical cables to lift, move or transport the equipment. Protect cables from heat and sharp objects.
• Ensure that the electrical cables do not present a tripping hazard.
• When using the power tool outdoors, use an extension cord suitable for outdoor use.

MAINTENANCE, TRANSPORTATION, AND STORAGE SAFETY

• Do not modify the product controls.
• Check regularly for broken parts or other conditions that may affect the proper operation of the machine.
• Replace worn or damaged parts immediately with original spare parts only.
• Carry out regular maintenance of the machine. Do not attempt any maintenance or repair work that is not described in this instruction manual. We recommend that maintenance and repairs not described in this manual be carried out by the Official Technical Service.
• Always clean dust and dirt from the machine when the work is finished.
• Do not clean the machine with solvents, flammable liquids or hard abrasives.
• Keep the handles of this machine dry and clean.
• Keep cutting tools sharp and clean. Proper maintenance of cutting tools reduces the likelihood of incidents by making them easier to control.
• If the machine starts to vibrate in a strange way, turn it off and examine it to find the cause. If you do not detect the reason take your machine to the Official Technical Service.
• To avoid burns or fire hazards, allow the machine to cool completely before transporting or storing it.
• When transporting the product, make sure that the motor is stopped and the machine is properly secured to prevent it from tipping over or being damaged.
• The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or in damp or wet locations.
• Store the product out of the reach of children.

SERVICE

• Have the product checked periodically by a qualified technician and use only original spare parts. If you have any questions, please contact the Official Technical Service.

WARNING ICONS

The icons on the warning labels on this machine and/or in the manual indicate information necessary for the safe use of this machine.

• Attention, danger!
• Read this manual carefully before starting the machine.
• Wear eye and ear protection.
• Wear tight, sturdy safety gloves.
• Use protección para las piernas y botas de seguridad antideslizantes con protecciones de acero.
• Wear a face mask to protect against dust, steam, and other toxic fumes.
• Do not expose to rain or damp conditions.
• Do not use this machine on slopes with more than a 15º drop.
• Risk of electric shock.
• Keep unprotected people away and at a safe distance from the work area.
• Keep children away from this machine.
• The danger of projection of flying debris. Be careful with all projected materials.
• Danger! Risk of amputation of the fingers. Keep your feet and hands away from the cutting tool.
• Do not allow your hands or any other part of your body to get near the moving parts of the machine.
• Turn off the machine and disconnect it completely before servicing the machine.
• Guaranteed sound power level XX LWA, dB (A).
• Dispose of your device in an environmentally friendly way. This product should not be disposed of with household waste.
• Complies with the European Union Directive.

PRODUCT DESCRIPTION

CONDITIONS OF USE
Only cut grass. Do not use this machine for other purposes than those for which it was intended. For example: do not use the mower for clearing, for cutting grass or bushes, and do not use it as a grinder. Any other use than that described above can lead to dangerous situations and exempts the manufacturer from any liability.

DETAILED DESCRIPTION OF THE PRODUCT

1. Cover
2. Cable clip
3. Fixing the knob
4. Control box
5. ON/OFF switch
6. Upper handlebar
7. Lower handlebar
8. Collection basket
9. Wheel

NOTE: The products detailed in this manual may vary in appearance, inclusions, description and packaging as shown or described here.

TECHNICAL DATA

NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.

BOX CONTENTS

1. Lawnmower (1pc)
2. Cable holder (1pc)
3. Instruction manual (1pc)

• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.

ATTENTION:
If any part is missing or damaged, contact the Official Technical Service. Do not use this product without having replaced the missing or damaged part. Using this product with damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

ATTENTION:
Do not connect the machine to the power supply until assembly is complete. Failure to comply could result in serious injury.

HANDLEBAR ASSEMBLY

1. Insert the bottom bars into the holes in the cover at the ends. Make sure the mounting holes of the bottom bars are aligned with those of the brackets.
2. Secure the bottom rails with the screws and washers.
3. Insert the cable tie through the top handle.
4. Place the upper handle over the lower handle, align the holes and tighten the bolts and knobs to hold it.

INSTALLATION OF THE COLLECTION BASKET

1. Open the protective cover and hold it in this position.
2. Align the brackets on the grass catcher frame with the hooks to hang it (M).
3. Release the deflector guard.
4. To remove the collection basket, lift the rear protective cover and lift the collection basket to unhook it from the mower. Once removed, pull the collection basket and lower the rear cover.

ASSEMBLE THE WHEELS

1. Insert the wheels into the steering axles.
2. Insert the washers and then place the locking pins through the holes in the axle, use the plastic spikes to bend the locking pin to lock the wheel.
3. Align the holes and insert the wheel covers.

PRODUCT USE

ATTENTION:
To avoid injury from accidental starts, always turn off the machine and disconnect it from the power supply before moving it or making adjustments.

STARTUP

ATTENTION:
Be sure to use an extension cable suitable for outdoor use (H05VV-F 2X0.75mm2) attached to the power supply through a leakage protection system (RCD).

1. Connect the machine to the extension cable and then to the power supply.

STARTING AND STOPPING

1. Press and hold the safety lock button on the control box.
2. Pull the ON/OFF switch lever upwards towards the handle and hold it in this position to start the engine.
3. Release the safety lock button.
4. To stop the machine, release the ON/OFF switch lever.

ADJUSTMENT OF HEIGHT
The mower has 3 cutting heights, 25mm, 40mm and 55mm. To adjust the height proceed as follows:

1. Lift the mower.
2. Push the wheel towards the front of the mower and raise or lower the wheel until it locks.
3. Carry out this process on all the wheels, locking them in the same position.

NOTE:
The motor is protected by a safety shutdown system that is activated when the blade jams or the motor is overloaded. When this happens, turn off the machine, clear any obstructions and wait a few minutes.

REPLACE THE CUTTING BLADES

ATTENTION:
Before performing this operation, check that the machine is completely off. Wear protective gloves when replacing the blade.

1. Hold the blade firmly in one hand and use the key to remove the blade clamp bolt by turning counterclockwise.
2. Remove the blade and clean the spindle area.
3. To place the new blade, align it with the drive shaft, making sure the blade mark is on the outside.
4. Tighten the blade securing bolt.

TIPS FOR MOWING THE LAWN

• The equipment is designed for domestic use only.
• Always wear appropriate footwear such as boots, long trousers whenever you use the product. DO NOT wear open footwear or shorts.
• Check the work area before mowing the lawn and remove any objects such as stones, etc. that may be thrown by the mower or that may damage it.
• If the machine hits an object during cutting or if an object is caught in the mower, stop the machine immediately.
• Allow the machine to come to a complete stop and cool down before inspecting the machine or before removing any object that may get caught in the mower.
• If the machine is damaged, have it inspected or repaired by the Official Technical Service before using it again.
• If you notice that the machine vibrates excessively during operation, it is an indication that the machine is damaged or worn and we recommend that you take it to an authorized technical center for inspection before using it again.
• Avoid cutting wet grass. Wet grass clippings do not collect well and have a tendency to stick to the underside of the mower deck.
• Avoid cutting very tall grass. If the grass is very tall, mow in several passes, each time reducing the cutting height.
• Do not use the equipment for other purposes for which it has not been designed, such as shredding leaves or wood chipping.
• Avoid working on overly steep slopes when mowing, and when mowing on an incline, mow across the face of the incline, and not up and down.
• Be careful when reversing or when pulling the equipment towards you and when changing direction.
• Stop the engine if the equipment has to be tilted or moved over non-grass surfaces.
• Be aware that cutting more than one-third of the total height of the grass may affect the health of the grass, and that weeds can spread more easily in extremely short grass. A healthier lawn is achieved by mowing the lawn regularly and not cutting the grass back excessively.
• When mowing the lawn, move the mower through the lawn at a sensible rate so as not to strain the machine, thus maintaining its efficiency and achieving the best cutting results.
• Mow in slightly overlapping rows. An effective pattern is to mow in straight lines, starting along the longest edge of the work area, then turning at the end and mowing the next row, and so on. Using a regular pattern helps keep the end result neat and reduces the chance of uncut areas.
• For lawn areas with trees or flowerbeds, for best results, it is recommended to cut 1 to 2 rows around the circumference of trees or flowerbeds.
• Empty the grass catcher regularly. Some models may feature an indicator that shows you when you have to empty the grass catcher. This is usually a small flap on the top of the catcher that lifts when the catcher becomes full.
• You need to always keep in mind that the longest part of turf consists of a stem and one or two leaves. If you cut the leaves completely, the grass will be damaged and new growth will be much more difficult.
• The low-level cut used in excess will cause alteration in the roots and consequently, the appearance of the lawn will be irregular.
• During summer, the grass should be kept moderately high since it helps the soil not drying out.
• The grass will look better if you cut it regularly at the same height alternating cutting directions.

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive maintenance for the machine to continue to function properly.

ATTENTION:
Make sure the machine is completely turned off before performing any maintenance or repairs. This will eliminate any potential risk. The machine is set at the factory. Do not make unnecessary adjustments, adjust only when necessary due to normal wear.

CLEANING GUIDELINES

ATTENTION:
Do not use solvents, chemicals, or abrasives when cleaning the machine, as some surfaces may be damaged.

• Wear gloves or use suitable tools to assist in cleaning, do not use bare hands.
• Clean the machine after every use to ensure the best performance and longest service life.
• It is recommended to jack the machine up when inspecting or working on the underside of the deck. Avoid tilting the machine to avoid potential fuel or oil spills or leaks.
• Use a slightly damp cloth, water, and mild detergent for cleaning.
• Use a brush for parts that are difficult to reach.
• Ensure air vents and surfaces designed for heat dissipation are clean and free of obstructions or debris.
• Remove clippings, dirt, etc from the underside of the deck and cutting blades (the deck wash function on some models assists in this procedure).
• It is recommended to lightly oil the cutting blades after each use to help prevent corrosion.
• Ensure all chutes and flaps are clean and not obstructed.
• Ensure that spring-loaded parts, such as the rear guard, return to the normal position when released.
• Clean and check the grass catcher for any damage, and replace damaged parts. Allow the grass catcher to dry thoroughly before storing it to prevent mildew or deterioration of the catcher netting (where applicable).
• Ensure that all control cables, levers, switches, etc are clean and operate normally and smoothly.

TROUBLESHOOTING

The table includes some of the most common problems, their causes, and remedies.

The machine does not work

| Check the power, and turn the machine on. Check the plug, and replace the blown fuse.
The electrical protection is activated| Allow the machine to cool down and increase the cutting height before continuing.
The machine leaves an uneven finish|

The height of the cut is low, increase the height of the cut.

The cutting blade is blunt

|

Replace the new blade.

There is excessive vibration/noise

| The blade bolt is loose, tighten the blade bolt.

The cutting blade is damaged, replace the new blade.

TRANSPORTATION AND STORAGE

• Allow the equipment to cool completely before transporting or storing it.
• Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
• The equipment is not weatherproof and should not be stored in direct sunlight, high temperatures or in damp locations.
• Always store the machine with the cutting element protection installed.
• Store the machine out of the reach of children.

RECYCLING AND DISPOSING
Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the environment and preserve natural resources. Dispose of the device in an environmentally friendly manner. Do not dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this appliance to an approved recycling centre (green dot).

Gasoline-used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local regulations: take them to a recycling center. The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject to the date of purchase taking into account the intended use of the product. As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its description as well as the defective tool. The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources, fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-compliance with operating and maintenance instructions.

In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT spare parts, the warranty will be voided. In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free of charge. Other claims beyond this warranty are not valid.

DECLARATION OF CONFORMITY (EC)

We, PRAT INTERNATIONAL BRANDS S.L., owner of the GREENCUT brand, with headquarters in Calle Blanquers (plot 7-8) Polígono Industrial Valls. 43800 – Valls, SPAIN, declare that the GLM1400C lawn mower, from the serial number of the year 2020 onwards, are in conformity with the requirements of the applicable European Parliament and Council Directives:

• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC.

Safety Requirements:
EN 60335-1:2012/A2:2019, EN 60335-2-77:2010.

The product delivered is the same as the one that underwent the EC-type examination.

Valls (SPAIN), 10 October 2020

Albert Prat Asensio, CEO (Authorised representative and responsible for technical documentation).

www.greencut-tools.com Manual revisado en Junio de 2021.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>