Ultralux SPZ10050 Outdoor LED Floodlight Instruction Manual
- June 12, 2024
- ULTRALUX
Table of Contents
Ultralux SPZ10050 Outdoor LED Floodlight
These products contains a light source of energy efficiency class B
.
FEATURES
INSTALLATION
NOTE : READ THE INSTRUCTIONS BEFORE MOUNTING
- Performing any activity with the power supply on constitutes potential hazardof electric shock. Prior to mounting, power supply must be switched off by using the main switch.
- The fixture can be installed only on a flame-resistant base with ignition temperature at least 200’C and does not deform or soften (e.g. metal, concrete, plaster).
- Activities related to connection to the power supply are to be commissioned to a person with appropriate a uthorization.
- The fixture, when properly assembled, may only be connected to a properly functioning electrical system with compliance with the applicable standards.
- Connect the fixture to the electrical supply, observing the correct polarity. (L) LIVE=BROWN; EARTH=GREN/YELLOW; (NJ NEUTRAL=BLUE
- All conductors and fitting auxiliary components are to be placed on ap-pro-priate distance from the heating parts of the fitting. When choosing the place for mounting, the required minimum distance must be kept between the fitting and the lightened objects.
- Prior to replacing, it is necessary to cut off the power supply by main switch.
- Clean only with dry cloth.
- The light fixture heat itself while working, so in case of necessity prior to undertaking its replacement, wait until cool down.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Do not cover the fixture. To avoid any fire hazard, provide unrestricted airflow to the heated fitting parts.
- Not suitable for accent lighting.
- Prior to starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, not ‘ endangering the surrounding and the users.
- The importer/supplier bears no responsibility for damages resulting from failure to comply with these instructions.
TAKE CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
- The products and its components are not dangerous for the environment.
- Please dispose all the package elements separately into the appropriate corresponding material containers.
- Please dispose all broken lighting fixtures separately in containers for out of usage electrical equipment. Before disposing the WEEE contact the importer/supplier or refer to the guidelines of your local – environment protection organizations
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>