SDC 432KLDUR Lockdown Push Switch Installation Guide
- June 6, 2024
- SDC
Table of Contents
SDC 432KLDUR Lockdown Push Switch Installation Guide
Product Overview
Side View
Top View
DPST
Single Color LED Wiring (Optional L2 model)
- 432KLDURL2 Model only
Operations
Push mushroom button to activate & latch.
Insert key & turn clockwise to reset.
Specification
-
Mounting : Single-Gang, 2″ Depth Min.
-
Overall Dimensions : 2-78″ H x 4-5/8″ W x 3-1/4″ D
(De-Activated, Less Key) -
Plate Finish : 630 (US32D)
-
Contact Type : DPST (1 N/C & 1 N/O)
-
Contact Rating : 24VDC @ 3 AMPS (Resistive/Inductive)
-
Wire Size : 12~22AWG (Single)
UL 294 Performance Rating
Level I : Line Security / Destructive Attack / Standby Power
Level IV : Endurance
To be used with a Class 2 power supply or voltage compatible UL 294 or UL 603 listed power supply
Compliance with ANSI/NFPA 70 National Electrical Code
All peripheral modules for UL compliance are required to be UL Listed UL 294.
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
Support
SECURITY DOOR CONTROLS
[t] 800.413.8783
805.494.0622
E-mail: service@sdcsecurity.com
801 Avenida Acaso, Camarillo, CA 93012
PO Box 3670, Camarillo, CA 93011
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>