TELLDUS Remote Controlled Outdoor Outlet User Guide
- June 6, 2024
- TELLDUS
Table of Contents
Manual version 1.0
CONNECT TO A REMOTE CONTROL
CONNECT OUTLET TO TELLDUS LIVE!
Requires a TellStick and a Telldus Live! account
FOLLOW US ON SOCIAL MEDIA FOR EVENTS, OFFERS AND INSPIRATION!
**facebook.com/telldus
@telldus**
USER MANUAL FOR REMOTE-CONTROLLED
**OUTDOOR OUTLET AND REMOTE CONTROL***
Remote-controlled outlet & remote control*
- Easy installation.
- Remote control* has 3 channels and 1 group function.
- The outlet has 5 memory settings.
- The remote control* operates at a distance of up to 30 meters (free line of sight).
- Blue LED indicates ON/OFF and programming status.
- The outlet is TellStick compatible.
Installation
- Remove the small plastic tab from the battery in the remote control*.
- Connect the outlet to mains power.
- Connect a lamp to the outlet. If there is a power switch on the connecting cable make sure it is switched on.
Pair a remote control* to an outlet
- Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly indicating learning mode.
- Press the ON button (1, 2, or 3) on the remote control within 15 seconds to link the remote control to the outlet (the learning mode is automatically disabled if no button is pressed within 15 seconds).
- The connected lamp blinks three times as confirmation.
Unpair a single remote control* from an outlet:
- Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
- Press the corresponding OFF button on the remote control* to remove the learned code (the learning mode is automatically disabled after 15 seconds if no button is pressed).
- The connected lamp blinks three times as confirmation.
Unpair all remote controls from an outlet:
- Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
- Within 7 seconds, press the button briefly once more (the learning mode is automatically disabled after 15 seconds if no button is pressed).
- The connected lamp blinks three times as confirmation.
ON/OFF operation of a paired outlet
- Press the ON button on the remote control* to switch on the power.
- Press the OFF button to switch off the power.
- Press the GROUP buttons to simultaneously switch all paired outlets ON or OFF.
- ON/OFF switching is also possible by briefly pressing the button on the outlet.
WARNING!
DO NOT OVERLOAD THE OUTLETS! Please note that you should always allow for a
safety margin, especially if the load is not resistive. Powerless only when
disconnected from the wall socket. Do not stack. Splash protected. Outlet
category: Class 3
Specifications
Remote control
Item number| 14733
Battery| 3V CR2032 (included)
Outlets
Item number| 14732
Max Load| max 3680 W (resistive load)
Range| Up to 30 m (free line of sight )
Protection rating| IP44
Protection class| I
Frequency| 433,92 MHz
Power supply| 230 V~, 50 Hz
Standby power| <1 W
Ambient temperature| 0°C–35°C
*** Remote Control only included in selected packages
Correct disposal of the products**
Within the European Union, this symbol indicates that the products must not be
disposed of in the household waste.
Devices contain valuable recyclable materials that should be recycled for
reuse and uncontrolled waste disposal may cause harm to the environment and
human health. Please dispose of the old products via suitable collection
systems or send the unit to the office where you bought it. This will make the
product recycling.
www.telldus.com
Telldus Technologies AB, Kabelvägen 7,
311 50 Falkenberg,
Sweden
www.telldus.com
support.telldus.com
Manual version 1.0
Documents / Resources
|
TELLDUS Remote Controlled Outdoor
Outlet
[pdf] User Guide
TELLDUS, Remote, Controlled, Outdoor, Outlet
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>