telldus 313160 Thermo/Hygrometer Sensor with External Probe User Manual
- June 6, 2024
- TELLDUS
Table of Contents
telldus 313160 Thermo/Hygrometer Sensor with External Probe User Manual
Connect sensor to Telldus Live
Note! If you have multiple sensors of this kind you must change
transmitting channel before you inserts the batteries. Each sensor must
transmit on it’s own channel. There are eight channels available and the
sensor is preset to channel 1 and °C.
Note! Do not immerse the unit into water.
Installation
- Unscrew the battery compartment lid.
- Choose channel by using the switches inside the battery compartment (see picture 1.1).
- Insert the batteries. Make sure the polarity is correct.
- Screw the battery compartment lid back on.
- Place the sensor within the TellStick’s receiving range (ca 20m).
- Follow the pictures 1.4-1.6 to connect the sensor into your Telldus Live! system.
Specifications
Article number: 313160
Battery: 2×1.5V AAA batteries
Range: 0-20m
Frequency: 433.92 MHz
Temperature: -40– +50°C
Temperature accuracy: +/-2°C
Relative humidity: 20% – 95%
Correct disposal of the products
Within the European Union, this symbol indicates that the products must not be disposed in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.
Customer Support
Proove Distribution AB
Birger Svensson Väg 34 B
432 40 Varberg, Sweden
www.telldus.com
support.telldus.com
facebook.com/telldus
@telldus
You can also read the manual online. Just follow the link: telld.us/m313160
