telldus 15110 Z-Wave Magnet Sensor User Manual
- June 6, 2024
- TELLDUS
Table of Contents
telldus 15110 Z-Wave Magnet Sensor
Installation
- Press button to remove back piece
- Insert the included batteries into the sensor.
Connect sensor to TellStick
Specifications
- Article number
- Product size: 40x70x18mm
- Battery
- Range
- Protection class
- Frequency
- Protocol
- Operating temperature
Placing the sensor
Mount the sensor on either a door or a window. Choose if you want to fasten with the M3 tape or the screws that come included.
3.1 – 3.3 Mounting with adhesive tape
4.1 – 4.3 Mounting with screws
Exclude the device
Read this before installation
- This sensor may not be installed outdoors.
- For rough surfaces: Fix magnet sensor into frame by using the included screws.
- For smooth surfaces: You may use double adhesive tape for fastening the sensor.
Correct disposal of the products Within the European Union, this symbol indicates that the products must not be disposed in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>