telldus Remote Controlled Outlets and Remote Control User Manual

June 5, 2024
TELLDUS

telldus Remote Controlled Outlets and Remote Control

telldus-Remote-Controlled Outlet- and-Remote-Control-

Connect to a remote control

telldus-Remote-Controlled-Outlets-and-Remote-Control-FIG
1

Connect outlet to Telldus Live

telldus-Remote-Controlled-Outlets-and-Remote-Control-FIG
2

telldus-Remote-Controlled-Outlets-and-Remote-Control-FIG
3  **Remote controlled outlets & remote control***

  •  Easy installation.
  •  Remote control* has 3 channels and 1 group function.
  •  Each outlet has 5 memory settings.
  •  The remote control* operates at a distance up to 30 meters (free line of sight).
  •  Blue LED indicates ON/OFF and programming status.
  • The outlets are TellStick compatible.

Installation

  • Remove the small plastic tab from the battery in the remote control*.
  • Connect the outlet to mains power.
  • Connect a lamp to the outlet. If there is a power switch on the connecting cable make sure it is switched on.

*Pair a remote control to an outlet**

  • Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly indicating learning mode.
  • Press ON button (1, 2, or 3) on the remote control within 15 seconds to link the remote control to the outlet (the learning mode is automatically disabled if no button is pressed within 15 seconds).
  • The connected lamp blinks three times as confirmation.

*Unpair a single remote control from an outlet**

  • Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
  •  Press the corresponding OFF button on the remote control* to remove the learned code (the learning mode is automati-cally disabled after 15 seconds if no button is pressed).
  •  The connected lamp blinks three times as confirmation.

Unpair all remote controls from an outlet

  • Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
  • Within 7 seconds, press the button briefly once more (the learning mode is automatically disabled after 15 seconds if no button is pressed).
  • The connected lamp blinks three times as confirmation.

ON/OFF operation of a paired outlet

  •  Press the ON button on the remote control* to switch on the power.
  • Press the OFF button to switch off the power.
  • Press the GROUP buttons to simultaneously switch all paired outlets ON or OFF.
  •  ON/OFF switching is also possible by briefly pressing the button on the outlet.

Proove AB Birger Svensson Väg 34 B, 432 40 Varberg, Sweden
www.telldus.comsupport.telldus.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

TELLDUS User Manuals

Related Manuals