telldus 15256 Mini PIR Sensor User Manual
- June 6, 2024
- TELLDUS
Table of Contents
telldus 15256 Mini PIR Sensor User Manual
Read this before installation
This detector may not be installed outdoors.
- Avoid installing the detector near air-conditioners, heat sources, where pets move or exposed to sunlight.
- Try to avoid installing at ventilation exits.
- For rough surfaces: Fix bracket into wall by using the included screws, then clip the detector onto bracket.
- For smooth surfaces: You may use double adhesive tape for fastening the detector.
- Adjust detector according to actual condition.
Installation
-
Remove the small plastic tab from the battery in the Mini PIR-sensor.
(When changing the battery – turn the lower part of the PIR-sensor clockwise.) -
Connect sensor to app
-
Open app, and add a new device
Follow the instructions in the app to finish setup.
- Placing the sensor
Recommended height for installation is 2.0-2.2 meters to cover maximal detection area. Detecting range of sensor is 5 meterX110°.
Specifications
Article number: 15256
Size: 30x38mm
Detection area: 5m, 110°
Battery: 3V CR2450
Range: 0-30m
Protection class: IP20
Frequency: Bluetooth 2.4GHz
Operating temperature: -10– + 55
Correct disposal of the products
Within the European Union, this symbol indicates that the products must not be disposed in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.
Customer Support
facebook.com/telldus
@telldus
You can also read the manual online.
Just follow the link: telld.us/m15256
Proove Distribution AB
Birger Svensson Väg 34 B
432 40 Varberg, Sweden
www.telldus.com
support.telldus.com
