vikings SUG410-D1 Unmanaged Industrial Switch Installation Guide
- June 5, 2024
- vikings
Table of Contents
vikings SUG410-D1 Unmanaged Industrial Switch
Overview
The SUG410-D1 Unmanaged Industrial Switch supports up to 410/100/1000 Base-TX RJ45 + 1100/1000Base-X SFP ports. The PoE version (SUG410P-D1) provides PoE (IEEE802.3af/at) as Power Sourcing Equipment (PSE) up to 30W per port.
Package Contents
- SUG410-D1 (SUG410P-D1) Switch x 1
- This Quick Installation Guide x 1
Installation
- To install the switch on a DIN rail, lock the upper part of the DIN rail clip on the upper side of the DIN rail and then gently press it until the clip is securely locked on the rail.
- To install it on the wall – re-position the wall-mount plates, which are already screwed on the unit. Remove din-rail clip if it interferes to mount the unit on the wall.
- Connect your network devices to the RJ45 switch ports with network cables.
- Insert the selected SFP module into the SFP port. Connect fiber cable to the SFP module fiber port.
- For better unit’s protection against surge, connect the ground cable to the ground screw located on top of the unit.
- Connect your power supply (range: 9-56VDC for non-PoE, 48-52VDC for PoE model) to green terminal block to V1+ and V1- pins. If unit to be powered from two power sources, connect
- cond power supply to V2+ and V2- pins.
- Power up your power supply(-ies) to power up the unit.
- If all cables are correctly connected, the indicators will lit as per LEDs status:
LEDs status
| LED | Color | Indication |
|---|---|---|
| PWR | Green | Lit when unit is powered |
LK/ACK
(SFP port)
|
Green
| Steady Lit when fiber link is established
Blink when data is being transmitted
(RJ45 ports)
|
Yellow
| Steady Lit when connection is established
Blink when data is being transmitted
Green
| Off when 10/100Mbps link is established
Steady Lit when 1000Mbps link is established
Contact information
- Vikings Technology Co., LTD.
- www.vikingstechnology.com
- [email protected]
References
Read User Manual Online (PDF format)
Loading......