telldus 14731 Remote Controlled Outdoor Outlet User Manual
- June 6, 2024
- TELLDUS
Table of Contents
**telldus 14731 Remote Controlled Outdoor Outlet User Manual
**
Connect to a remote control
Remote Control only included in selected packages
Connect sensor to TellStick
Requires a TellStick and a Telldus Live account
Read this before installation
Remote controlled outlets & remote control
- Remote control* has 3 channels and 1 group function.
- Each outlet has 5 memory settings.
- Blue LED indicates ON/OFF and programming status.
Installation
- Remove the plastic tab from the battery in the remote control.
- Connect the outlet to mains power.
- Connect a lamp to the outlet. If there is a power switch on the connecting cable make sure it is switched on.
Unpair a single remote control from an outlet
- • Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
- Press the corresponding OFF button on the remote control to remove the learned code (the learning mode is automatically disabled after 15 seconds if no button is pressed).
- The connected lamp blinks three times as confirmation.
Unpair all remote controls from an outlet
- Keep the button on the outlet pressed for 7 seconds. The LED blinks slowly.
- Within 7 seconds, press the button briefly once more (the learning mode is automatically disabled after 15 seconds if no button is pressed).
- The connected lamp blinks three times as confirmation.
Specifications
Article number: 14731
Battery: 3V CR2032
Max resistive load: 3680 W
Range: 0-30m
Protection class: IP44
Protection class: I
Frequency: 433.92 MHz
Operating temperature: 0°C–35°C
Power supply: 230 V~, 50 Hz
Standby power/: <1 W
Correct disposal of the products
Within the European Union, this symbol indicates that the products must not be disposed in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.