telldus 14450 Wireless Doorbell Instruction Manual
- June 6, 2024
- TELLDUS
Table of Contents
telldus 14450 Wireless Doorbell
Connect a push button
Connect doorbell to Telldus Live
www.facebook.com/telldus
@telldus
You can also read the manual online.
Just follow the link: telld.us/m14450
Before installation
- The push button supplied with this kit is already paired with the receiver and set to the default ringtone. If not, please follow the steps below to pair the push button with the receiver and set the desired ringtone.
- It is not advisable to mount the push button onto metal surfaces as the material can block signals between the push button and the receiver. However, if this is the only option then we recommend that you use the adhesive pad provided as opposed to using the provided screws
- Operating range will decrease if the battery in the push button is low.
- It is not advisable to mount the transmitter in the outdoor directly without any shelter which could accelerate aging of plastic materials.
Pairing a transmitter with a receiver
There are 10 ringtones to choose from. Different ringtones can be set for different push buttons/transmitters.
- Press Forward button on the receiver to choose your favorite ringtone, the receiver is playing the selected ringtone.
- Press the Volume button on the receiver to toggle between volume levels 1-4.
- Press and hold the Volume button on the receiver for 5 seconds, a sound is played to confirm entering pairing mode.
- Within 5 seconds, press the push button to send a signal to the receiver. When the pairing is successful the receiver will play the selected ringtone as confirmation.
Pairing two or more transmitters with a receiver
Pairing is done with one transmitter at a time. Repeat steps 1-4 above to add another transmitter.
Reset receiver
1. Press Forward button for 5 seconds to reset the receiver. A sound is played and the LED indicator starts flashing to confirm successful reset. Settings are now reset and no transmitter is paired with the receiver.
Specifications
Push button:
Battery:| CR2032 (3V) (included)
Working temperature:| -20°C~50°C
Protection rating:.| IP55
Operating range| Up to 30 m (free line of sight)
Operating range| 433.92 MHz
Receiver :
Selectable ringtones:| 10
Memory slots on receiver:.| 50
Volume range| 25~110dB, 4 levels
Power supply:| 230 V~, 50 Hz
Power consumption:|
Frequency:| 433.92 MHz
Correct disposal of the products
| Within the European Union, this symbol indicates that the products must not be disposed in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.
Proove Distribution AB
Birger Svenssons väg 34 B 43240 Varberg, Sweden
www.telldus.com •
support.telldus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>